173 research outputs found
Doctor of Philosophy
dissertationIn this dissertation, we present methods for intuitive telemanipulation of manipulators that use piezoelectric stick-slip actuators (PSSAs). Commercial micro/nano-manipulators, which utilize PSSAs to achieve high precision over a large workspace, are typically controlled by a human operator at the joint level, leading to unintuitive and time-consuming telemanipulation. Prior work has considered the use of computer-vision-feedback to close a control loop for improved performance, but computer-vision-feedback is not a viable option for many end users. We discuss how open-loop models of the micro/nano-manipulator can be used to achieve desired end-effector movements, and we explain the process of obtaining open-loop models. We propose a rate-control telemanipulation method that utilizes the obtained model, and we experimentally quantify the effectiveness of the method using a common commercial manipulator (the Kleindiek MM3A). The utility of open-loop control methods for PSSAs with a human in the loop depends directly on the accuracy of the open-loop models of the manipulator. Prior research has shown that modeling of piezoelectric actuators is not a trivial task as they are known to suffer from nonlinearities that degrade their performance. We study the effect of static (non-inertial) loads on a prismatic and a rotary PSSA, and obtain a model relating the step size of the actuator to the load. The actuator-specific parameters of the model are calibrated by taking measurements in specific configurations of the manipulator. Results comparing the obtained model to experimental data are presented. PSSAs have properties that make them desirable over traditional DC-motor actuators for use in retinal surgery. We present a telemanipulation system for retinal surgery that uses a full range of existing disposable instruments. The system uses a PSSA-based manipulator that is compact and light enough that it could reasonably be made head-mounted to passively compensate for head movements. Two mechanisms are presented that enable the system to use existing disposable actuated instruments, and an instrument adapter enables quick-change of instruments during surgery. A custom stylus for a haptic interface enables intuitive and ergonomic telemanipulation of actuated instruments. Experimental results with a force-sensitive phantom eye show that telemanipulated surgery results in reduced forces on the retina compared to manual surgery, and training with the system results in improved performance. Finally, we evaluate operator efficiency with different haptic-interface kinematics for telemanipulated retinal surgery. Surgical procedures of the retina require precise manipulation of instruments inserted through trocars in the sclera. Telemanipulated robotic systems have been developed to improve retinal surgery, but there is not a unique mapping of the motions of the surgeon's hand to the lower-dimensional motions of the instrument through the trocar. We study operator performance during a precision positioning task on a force-sensing phantom retina, reminiscent of telemanipulated retinal surgery, with three common haptic-interface kinematics implemented in software on a PHANTOM Premium 6DOF haptic interface. Results from a study with 12 human subjects show that overall performance is best with the kinematics that represent a compact and inexpensive option, and that subjects' subjective preference agrees with the objective performance results
Modelling and simulation of a multi-fingered robotic hand for grasping tasks
This paper develops the kinematic, dynamic and contact models of a three-fingered robotic hand (BarrettHand) in order to obtain a complete description of the system which is required for manipulation tasks. These models do not only take into account the mechanical coupling and the breakaway mechanism of the under-actuated robotic hand but they also obtain the force transmission from the hand to objects, which are represented as triangle meshes. The developed models have been implemented on a software simulator based on the Easy Java Simulations platform. Several experiments have been performed in order to verify the accuracy of the proposed models with regard to the real physic system.This work is supported by the Spanish Ministries of Education, Science and Innovation through the research project DPI2008-02647 ('Intelligent Manipulation through Haptic Perception and Visual Servoing by Using an Articulated Structure situated over a Robotic Manipulator') and the grant AP2005-1458
Haptics: state of the art survey
This paper presents a novel approach to the understanding of Haptic
and its related fields where haptics is used extensively like in display
systems, communication, different types of haptic devices, and
interconnection of haptic displays where virtual environment should
feel like equivalent physical systems. There have been escalating
research interests on areas relating to haptic modality in recent years,
towards multiple fields. However, there seems to be limited studies in
determining the various subfields and interfacing and related
information on haptic user interfaces and its influence on the fields
mentioned. This paper aims to bring forth the theory behind the essence
of Haptics and its Subfields like haptic interfaces and its applications
A Method for measuring the upper limb motion and computing a compatible exoskeleton trajectory
International audienceThis paper deals with the problem of computing trajectories for an exoskeleton that match a motion recorded on a given subject. Literature suggests that this problem can be solved by reconstructing the subject's joint motion using one of the numerous models available, and then feeding the exoskeleton with the joint trajectories. This is founded on the assumption that the exoskeleton kinematics reproduces the human kinematics. In practice, though, mismatches are unavoidable and lead to inaccuracies. We thus developed a method that is primarily based on an appropriate mechanical design: passive mechanisms are used to connect the exoskeleton with splints wore by the subject, in such a way that, within the workspace, there always exists a posture of the exoskeleton compatible with a given position and orientation of the splints. The trajectory computing method, by itself, consists of recording the position and orientation of the splints thanks to a conventional 3D motion tracker and to exploit standard robotics tools in order to compute an exoskeleton posture compatible with the measured human posture. Conclusive experimental results involving an existing 4 DoF upper-limb exoskeleton are shown
Recommended from our members
Redesigning the human-robot interface : intuitive teleoperation of anthropomorphic robots
textA novel interface for robotic teleoperation was developed to enable accurate and highly efficient teleoperation of the Industrial Reconfigurable Anthropomorphic Dual-arm (IRAD) system and other robotic systems. In order to achieve a revolutionary increase in operator productivity, the bilateral/master-slave approach must give way to shared autonomy and unilateral control; autonomy must be employed where possible, and appropriate sensory feedback only where autonomy is impossible; and today’s low-information/high feedback model must be replaced by one that emphasizes feedforward precision and minimal corrective feedback. This is emphasized for task spaces outside of the traditional anthropomorphic scale such as mobile manipulation (i.e. large task spaces) and high precision tasks (i.e. very small task spaces). The system is demonstrated using an anthropomorphically dimensioned industrial manipulator working in task spaces from one meter to less than one millimeter, in both simulation and hardware. This thesis discusses the design requirements and philosophy of this interface, provides a summary of prototype teleoperation hardware, simulation environment, test-bed hardware, and experimental results.Mechanical Engineerin
Proceedings of the NASA Conference on Space Telerobotics, volume 4
Papers presented at the NASA Conference on Space Telerobotics are compiled. The theme of the conference was man-machine collaboration in space. The conference provided a forum for researchers and engineers to exchange ideas on the research and development required for the application of telerobotic technology to the space systems planned for the 1990's and beyond. Volume 4 contains papers related to the following subject areas: manipulator control; telemanipulation; flight experiments (systems and simulators); sensor-based planning; robot kinematics, dynamics, and control; robot task planning and assembly; and research activities at the NASA Langley Research Center
Accelerating Surgical Robotics Research: A Review of 10 Years With the da Vinci Research Kit
Robotic-assisted surgery is now well-established in clinical practice and has
become the gold standard clinical treatment option for several clinical
indications. The field of robotic-assisted surgery is expected to grow
substantially in the next decade with a range of new robotic devices emerging
to address unmet clinical needs across different specialities. A vibrant
surgical robotics research community is pivotal for conceptualizing such new
systems as well as for developing and training the engineers and scientists to
translate them into practice. The da Vinci Research Kit (dVRK), an academic and
industry collaborative effort to re-purpose decommissioned da Vinci surgical
systems (Intuitive Surgical Inc, CA, USA) as a research platform for surgical
robotics research, has been a key initiative for addressing a barrier to entry
for new research groups in surgical robotics. In this paper, we present an
extensive review of the publications that have been facilitated by the dVRK
over the past decade. We classify research efforts into different categories
and outline some of the major challenges and needs for the robotics community
to maintain this initiative and build upon it
- …