185 research outputs found

    Impact of Transport Control Protocol on Full Duplex Performance in 5G Networks

    Get PDF

    Radio Resource Management in NB-IoT Systems:Empowered by Interference Prediction and Flexible Duplexing

    Get PDF
    NB-IoT is a promising cellular technology for enabling low cost, low power, long-range connectivity to IoT devices. With the bandwidth requirement of 180 kHz, it provides the flexibility to deploy within the existing LTE band. However, this raises serious concerns about the performance of the technology due to severe interference from multi-tier 5G HetNets. Furthermore, as NB-IoT is based on HD-FDD, the symmetric allocation of spectrum band between the downlink and uplink results in underutilization of resources, particularly in the case of asymmetric traffic distribution. Therefore, an innovative RRM strategy needs to be devised to improve spectrum efficiency and device connectivity. This article presents the detailed design challenges that need to be addressed for the RRM of NB-IoT and proposes a novel framework to devise an efficient resource allocation scheme by exploiting cooperative interference prediction and flexible duplexing techniques

    Per-Priority Flow Control (Ppfc) Framework For Enhancing Qos In Metro Ethernet

    Get PDF
    Day by day Internet communication and services are experiencing an increase in variety and quantity in their capacity and demand. Thus, making traffic management and quality of service (QoS) approaches for optimization of the Internet become a challenging area of research; meanwhile flow control and congestion control will be considered as significant fundamentals for the traffic control especially on the high speed Metro Ethernet. IEEE had standardized a method (IEEE 802.3x standard), which provides Ethernet Flow Control (EFC) using PAUSE frames as MAC control frames in the data link layer, to enable or disable data frame transmission. With the initiation of Metro Carrier Ethernet, the conventional ON/OFF IEEE 802.3x approach may no longer be sufficient. Therefore, a new architecture and mechanism that offer more flexible and efficient flow and congestion control, as well as better QoS provisioning is now necessary

    Space-Air-Ground Integrated 6G Wireless Communication Networks: A Review of Antenna Technologies and Application Scenarios

    Get PDF
    A review of technological solutions and advances in the framework of a Vertical Heterogeneous Network (VHetNet) integrating satellite, airborne and terrestrial networks is presented. The disruptive features and challenges offered by a fruitful cooperation among these segments within a ubiquitous and seamless wireless connectivity are described. The available technologies and the key research directions for achieving global wireless coverage by considering all these layers are thoroughly discussed. Emphasis is placed on the available antenna systems in satellite, airborne and ground layers by highlighting strengths and weakness and by providing some interesting trends in research. A summary of the most suitable applicative scenarios for future 6G wireless communications are finally illustrated

    Cross layer optimization in 4G Wireless mesh networks

    Get PDF
    Wireless networks have been rapidly evolving over the past two decades. It is foreseen that Fourth generation (4G) wireless systems will involve the integration of wireless mesh networks and the 3G wireless systems such as WCDMA. Moreover their wireless mesh routers will provide service to wireless local networks (WLANs) and possibly incorporate MIMO system and smart admission control policies among others. This integration will not only help the service providers cost effectiveness and users connectivities but will also improve and guarantee the QoS criteria. On the other hand, cross layer design has emerged as a new and major thrust in improving the quality of service (QoS) of wireless networks. Cross layer design involves the interaction of various layers of the network hierarchy which could further improve the QoS of the 4G integrated networks. In this work we seek new techniques for improving the overall QoS of integrated 4G systems. Towards this objective we start with the local low tier WLAN access. We then investigate CDMA alternatives to the TDMA access for wireless mesh networks. Cross layer design in wireless mesh networks is then pursued. In the first phase of this thesis a new access mechanism for WLANs is developed, in which users use an optimum transmission probability obtained by estimating the number of stations from the traffic conditions in a sliding window fashion, thereby increasing the throughput compared to the standard DCF and RTS/CTS mechanism while maintaining the same fairness and the delay performance. In the second phase we introduce a code division multiple access/Time division duplex technique CDMA/TDD for wireless mesh networks, we outline the transmitter and receiver for the relay nodes and evaluate the efficiency, delay and delay jitter performances. This CDMA based technique is more amenable to integrating the two systems (Mesh networks and WCDMA or CDMA 2000 of3G). We compare these results with the TDMA operation and through analysis we prove that the CDMA system outperforms the TDMA counterparts. In the third phase we proceed to an instance of cross layer optimized networks, where we develop an overall optimization routine that finds simultaneously the best route and the best capacity allocation to various nodes. This optimization routine minimizes the average end to end packet delay over all calls subject to various contraints. In the process we use a new adaptive version of Spatial TDMA as a platform for comparison purposes of the MAC techniques involved in the cross layer design. In this phase we also combine CDMA/TDD and optimum routing for cross layer design in wireless mesh networks. We compare the results of the CDMA/TDD system with results obtained from the STDMA system. In our analysis we consider the parallel transmissions of mesh nodes in a mesh topology. These parallel transmissions will increase the capacity resulting in a higher throughput with a lower delay. This will allow the service providers to accommodate more users in their system which will obviously reduce the colt and the end users will enjoy a better service paying a lower amount

    Machine Learning Meets Communication Networks: Current Trends and Future Challenges

    Get PDF
    The growing network density and unprecedented increase in network traffic, caused by the massively expanding number of connected devices and online services, require intelligent network operations. Machine Learning (ML) has been applied in this regard in different types of networks and networking technologies to meet the requirements of future communicating devices and services. In this article, we provide a detailed account of current research on the application of ML in communication networks and shed light on future research challenges. Research on the application of ML in communication networks is described in: i) the three layers, i.e., physical, access, and network layers; and ii) novel computing and networking concepts such as Multi-access Edge Computing (MEC), Software Defined Networking (SDN), Network Functions Virtualization (NFV), and a brief overview of ML-based network security. Important future research challenges are identified and presented to help stir further research in key areas in this direction

    Technologies of Mobile Communication

    Get PDF
    Long-Term Evolution (LTE) is a new technology recently specified by 3GPP-Third Generation Partnership Project on the way towards fourth-generation mobile. This thesis presents the main technical features of this technology as well as its performances in terms of peak bit rate and average cell throughput, among others. LTE entails a big technological improvement as compared with the previous 3G standards. 1 However, this thesis also demonstrates that LTE performances do not fulfill the technical requirements established by ITU-R to classify one radio access technology as a member of the IMT-Advanced family of standards. Thus, this thesis describes the procedure followed by 3GPP to address these challenging requirements. Through the design and optimization of new radio access techniques and a further evolution of the system, 3GPP is laying down the foundations of the future LTE-Advanced standard, the 3GPP candidate for 4G

    Realizing mobile multimedia systems over emerging fourth-generation wireless technologies

    Get PDF
    Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2001.Includes bibliographical references (p. [161]-167) and index.by Pei-Jeng Kuo.M.Eng
    corecore