CoReDac: Collision-Free Command-Response Data Collection

Intenerg

TS-MUWSN: Time synchronization for mobile underwater sensor networks

Time synchronization is an important, yet challenging, problem in underwater sensor networks (UWSNs). This challenge can be attributed to: 1) messaging timestamping; 2) node mobility; and 3) Doppler scale effect. To mitigate these problems, we present an acoustic-based time-synchronization algorithm for UWSN, where we compare several message time-stamping algorithms in addition to different Doppler scale estimators. A synchronization system is based on a bidirectional message exchange between a reference node and a slave one, which has to be synchronized. Therefore, we take as reference the DA-Sync-like protocol (Liu et al., 2014), which takes into account node's movement by using first-order kinematic equations, which refine Doppler scale factor estimation accuracy, and result in better synchronization performance. In our study, we propose to modify both time-stamping and Doppler scale estimation procedures. Besides simulation, we also perform real tests in controlled underwater communication in a water test tank and a shallow-water test in the Mediterranean Sea.Peer ReviewedPostprint (author's final draft

A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends

This paper examines the security vulnerabilities and threats imposed by the inherent open nature of wireless communications and to devise efficient defense mechanisms for improving the wireless network security. We first summarize the security requirements of wireless networks, including their authenticity, confidentiality, integrity and availability issues. Next, a comprehensive overview of security attacks encountered in wireless networks is presented in view of the network protocol architecture, where the potential security threats are discussed at each protocol layer. We also provide a survey of the existing security protocols and algorithms that are adopted in the existing wireless network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term evolution (LTE) systems. Then, we discuss the state-of-the-art in physical-layer security, which is an emerging technique of securing the open communications environment against eavesdropping attacks at the physical layer. We also introduce the family of various jamming attacks and their counter-measures, including the constant jammer, intermittent jammer, reactive jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the integration of physical-layer security into existing authentication and cryptography mechanisms for further securing wireless networks. Finally, some technical challenges which remain unresolved at the time of writing are summarized and the future trends in wireless security are discussed.Comment: 36 pages. Accepted to Appear in Proceedings of the IEEE, 201

Leveraging Backscatter for Ultra-low Power Wireless Sensing Systems

The past few years have seen a dramatic growth in wireless sensing systems, with millions of wirelessly connected sensors becoming first-class citizens of the Internet. The number of wireless sensing devices is expected to surpass 6.75 billion by 2017, more than the world\u27s population as well as the combined market of smartphones, tablets, and PCs. However, its growth faces two pressing challenges: battery energy density and wireless radio power consumption. Battery energy density looms as a fundamental limiting factor due to slow improvements over the past several decades (3x over 22 years). Wireless radio power consumption is another key challenge because high-speed wireless communication is often far more expensive energy-wise than computation, storage and sensing. To make matters worse, wireless sensing devices are generating an increasing amount of data. These challenges raise a fundamental question --- how should we power and communicate with wireless sensing devices. More specifically, instead of using batteries, can we leverage other energy sources to reduce, if not eliminate, the dependence on batteries? Similarly, instead of optimizing existing wireless radios, can we fundamentally change how radios transmit wireless signals to achieve lower power consumption? A promising technique to address these questions is backscatter --- a primitive that enables RF energy harvesting and ultra-low-power wireless communication. Backscatter has the potential to reduce dependence on batteries because it can obtain energy by rectifying the wireless signals transmitted by a backscatter reader. Backscatter can also work by reflecting existing wireless signals (WiFi, BLE) when these are available nearby. Because signal reflection only consumes uWs of power, backscatter can enable ultra-low-power wireless communication. However, the use of backscatter for communicating with wireless sensing devices presents several challenges. First, decreasing RF power across distance limits the operational range of micro-powered backscatter devices. This raises the question of how to maintain a communication link with a backscatter device despite tiny amount of harvested power. Second, even though the backscatter RF front-end is extremely power-efficient, the computational and sensing overhead on backscatter sensors limit its ability to operate with a few micro-Watts of power. Such overhead is a negligible factor of overall power consumption for platforms where radio power consumption is high (e.g. WiFi or Bluetooth based devices). However, it becomes the bottleneck for backscatter based platforms. Third, backscatter readers are not currently deployed in existing indoor environments to provide a continuous carrier for carrying backscattered information. As a result, backscatter deployment is not yet widespread. This thesis addresses these challenges by making the following contributions. First, we design a network stack that enables continuous operation despite decreasing harvested power across distance by employing an OS abstraction --- task fragmentation. We show that such a network stack enables packet transfer even when the whole system is powered by a 3cmx3cm solar panel under natural indoor light condition. Second, we design a hardware architecture that minimizes the computational overhead of backscatter to enable over 1Mbps backscatter transmission while consuming less than 100uWs of power, a two order of magnitude improvement over the state-of-the-art. Finally, we design a system that can leverage both ambient WiFi and BLE signals for backscatter. Our empirical evaluation shows that we can backscatter 500bps data on top of a WiFi stream and 50kbps data on top of a Bluetooth stream when the backscatter device is 3m away from the commercial WiFi and Bluetooth receivers

Design of a ferrite rod antenna for harvesting energy from medium wave broadcast signals

Radio frequency (RF) energy harvesting is an emerging technology that has the potential to eliminate the need for batteries and reduce maintenance costs of sensing applications. The antenna is one of the critical components that determines its performance and while antenna design has been well researched for the purpose of communication, the design for RF energy harvesting applications has not been widely addressed. The authors present an optimised design for such an antenna for harvesting energy from medium wave broadcast transmissions. They derive and use a model for computing the optimal antenna configuration given application requirements on output voltage and power, material costs and physical dimensions. Design requirements for powering autonomous smart meters have been considered. The proposed approach was used to obtain the antenna configuration that is able to deliver 1 mW of power to 1 kΩ load at a distance of up to 9 km, sufficient to replace batteries on low-power sensing applications. Measurements using a prototype device have been used to verify the authors simulations

Cross-Sender Bit-Mixing Coding

Scheduling to avoid packet collisions is a long-standing challenge in networking, and has become even trickier in wireless networks with multiple senders and multiple receivers. In fact, researchers have proved that even {\em perfect} scheduling can only achieve $\mathbf{R} = O(\frac{1}{\ln N})$. Here $N$ is the number of nodes in the network, and $\mathbf{R}$ is the {\em medium utilization rate}. Ideally, one would hope to achieve $\mathbf{R} = \Theta(1)$, while avoiding all the complexities in scheduling. To this end, this paper proposes {\em cross-sender bit-mixing coding} ({\em BMC}), which does not rely on scheduling. Instead, users transmit simultaneously on suitably-chosen slots, and the amount of overlap in different user's slots is controlled via coding. We prove that in all possible network topologies, using BMC enables us to achieve $\mathbf{R}=\Theta(1)$. We also prove that the space and time complexities of BMC encoding/decoding are all low-order polynomials.Comment: Published in the International Conference on Information Processing in Sensor Networks (IPSN), 201

Low power CMOS IC, biosensor and wireless power transfer techniques for wireless sensor network application

The emerging field of wireless sensor network (WSN) is receiving great attention due to the interest in healthcare. Traditional battery-powered devices suffer from large size, weight and secondary replacement surgery after the battery life-time which is often not desired, especially for an implantable application. Thus an energy harvesting method needs to be investigated. In addition to energy harvesting, the sensor network needs to be low power to extend the wireless power transfer distance and meet the regulation on RF power exposed to human tissue (specific absorption ratio). Also, miniature sensor integration is another challenge since most of the commercial sensors have rigid form or have a bulky size. The objective of this thesis is to provide solutions to the aforementioned challenges