Control and Limit Enforcements for VSC Multi-Terminal HVDC in Newton Power Flow

This paper proposes a novel method to automatically enforce controls and limits for Voltage Source Converter (VSC) based multi-terminal HVDC in the Newton power flow iteration process. A general VSC MT-HVDC model with primary PQ or PV control and secondary voltage control is formulated. Both the dependent and independent variables are included in the propose formulation so that the algebraic variables of the VSC MT-HVDC are adjusted simultaneously. The proposed method also maintains the number of equations and the dimension of the Jacobian matrix unchanged so that, when a limit is reached and a control is released, the Jacobian needs no re-factorization. Simulations on the IEEE 14-bus and Polish 9241-bus systems are performed to demonstrate the effectiveness of the method.Comment: IEEE PES General Meeting 201

Utility Applications of Smart Online Energy Systems: A case for Investing in Online Power Electronics

The backbone of any power grid, the transmission and sub-transmission networks, should be flexible, robust, resilient and self-healing to cope with wide types of network adverse conditions and operations. Power electronic applications are making a major impact on the present and future state of power systems generation, transmission and distribution. These applications include FACTS (Flexible Alternating Current Transmission), HVDC (High Voltage Direct Current) in transmission and Custom Power devices in distribution. FACTS devices are some of the advanced assets that network planners can use to make the transmission grid become more flexible and robust. Many established research ideas to advance operations of these devices have been published in the open literature over the last ten years. The most recent publications in this field are reviewed in this thesis. A critical analysis of literature and existing conditions reveals a range of potentials that are ideal for development in Qatar’s increasingly strained electricity network. As a result of demand surge in Qatar in recent years and the forecast to grow in the same rate, the need for improvement in Qatar Power Transmission System (QPTS) is great and significant. Conventional planning and operational solutions such as conductor up-rating, and fixed series capacitors (FSC) are considered. However there are growing challenges on getting new rights of ways for new overhead lines and even corridors for new cables. Advanced FACTS devices are considered for dynamic control of power flows and voltages, such as TCSC (Thyristor Controlled Series Capacitor) and GUPFC (Generalized, Unified Power Flow Controller). The research in this thesis examines the potential for QPTS to improve and develop, with emphasis on increased output through integrated online energy systems, online FACTS and HVDC controllers based on synchrophasor measurements. The devices are modelled in Siemens PTI’s PSS®E software, through steady-state mode case study to investigate power flow control and voltage support. Comparison between similar FACTS technologies, such as SVC and STATCOM, is also presented. The improvement in power flow imbalance between transmission lines with different ratings and lengths is studied. The FACTS devices are tested for voltage support to enhance the network voltage profile and hence increase security and reliability to important industrial customers. Optimization techniques of the FACTS devices allocation and rating are generally discussed considering the voltage improvement and optimal power flow control. The results achieved showing the network improvement with using the FACTS are presented in the case studies. In a separate case study, applying medium voltage custom power devices to convert DC battery storage and photovoltaic energy into AC energy using a power conversion system is discussed. The dynamic mode of the STATCOM is modelled in QPTS in the succeeding case study using the same software and compared with the capacitor banks. This is followed by another case of HVDC analysis modelled with and without STATCOM present. The thesis discussed the real time operation and control of power system physical parameters in QPTS using capacitors, FACTS and HVDC. The key contribution of this thesis is the application and resting of all sorts of FACTS and HVDC in QPTS. The system wide area, coordinated control of FACTS (Online Power Electronics-OPE) is a new concept. Another major contribution is being able to look at a system wide approach for a transmission smart grid application. The results of thesis are presented in international conferences in USA, Hong Kong, France, Portugal, and locally in the Arabian Gulf (Dubai, Oman and Qatar). The thesis’s papers are listed in the ‘References’ section and in Appendix-F

Power control, fault analysis and protection of series connected diode rectifier and VSC based MTDC topology for offshore application.

A multiterminal high-voltage dc (MTDC) system is a promising method for transmitting energy generated from an offshore windfarm (OWF). The creation of MTDC systems became easier by the introduction of voltage source converter (VSC) due to the flexibility and controllability it provides. This technology is newer than the line-commutated converter technology (LCC). Power systems can include any number of windfarms together with converters for both offshore and onshore power conversion. Therefore, this thesis suggests a three-terminal MTDC model of two offshore windfarms and one onshore inverter. The electric energy generated by the two windfarms is rectified into dc and transmitted to the shore using dc cable. Although a VSC or a diode rectifier (DR) can convert ac to dc, a series connection of a VSC and two DRs was proposed at the windfarm side to convert the generated power to achieve controllability of the uncontrollable diode rectifiers and reduces the high cost of badditional VSCs. The proposed topology converts the ac power by dividing the windfarm power so that one-third is the share of the VSC and two-thirds is the share of the DRs. The same topology is used to convert the power produced from the other windfarm. Then, the dc power is transmitted via an undersea dc cable to the onshore location, and is then inverted into ac before it is supplied to the neighbouring ac grid using a grid-side VSC. The proposed topology has many advantages, including a significant save in windfarm VSC (WFVSC) capital cost and a significant reduction in the loss of power of the converter without losing the overall controllability. However, although this topology is suitable for windfarm applications, it might not be suitable for high-voltage direct current (HVDC) that requires bidirectional power flow unless making changes to the topology such as disconnecting the diode rectifiers. Furthermore, fault analyses were investigated, including dc faults and ac faults. Ac faults are categorised as symmetrical or unsymmetrical faults. For comparison purposes, a Simulink model was designed, implemented, and simulated as a reference model. The reference model can operate as VSC-, DR-based MTDC, or a mix of both in a way that any component can be added to or removed from the model at any time during the simulation run. The contribution to the dc fault current from various parts such as dc capacitor and the adjacent feeder was investigated thoroughly, and detailed mathematical formulae were developed to compute fault current from these contributors. In addition, the results of the system response due to both fault types are illustrated and discussed. Both symmetrical and unsymmetrical ac faults were initiated on the onshore grid side, and the system response results are presented for those faults. A generalised control scheme (GCS) was proposed in this thesis, which add the ability the model to control the reactive power and is suitable for both balanced and unbalanced ac faults conditions. A protection against faults was investigated and implemented using dc circuit breakers. The protection system was built to ensure safe operation and to fulfil the grid code requirements. Many grid codes are available and presented in the literature, such as Spanish, British, and Danish; however, a grid code by E.ON was chosen. The protection scheme in VSC-based MTDC networks plays a vital role during dc faults. It is vital that this protection be sensitive, selective, fast, and reliable. Specifically, it must isolate the fault reliably from the system within a short time after the fault occurrence, while maintaining the remaining components of the system in a secure operational condition. For optimal performance, the protection scheme discussed in this thesis employs solid-state circuit breakers. A literature survey relevant to the tasks mentioned above was conducted.PhD in Energy and Powe

Loss allocation in a distribution system with distributed generation units

In Denmark, a large part of the electricity is produced by wind turbines and combined heat and power plants (CHPs). Most of them are connected to the network through distribution systems. This paper presents a new algorithm for allocation of the losses in a distribution system with distributed generation. The algorithm is based on a reduced impedance matrix of the network and current injections from loads and production units. With the algorithm, the effect of the covariance between production and consumption can be evaluated. To verify the theoretical results, a model of the distribution system in Brønderslev in Northern Jutland, including measurement data, has been studied

State-of-the-art of design and operation of power systems with large amounts of wind power, summary of IEA Wind collaboration

An international forum for exchange of knowledge of power system impacts of wind power has been formed under the IEA Implementing Agreement on Wind Energy. The task “Design and Operation of Power Systems with Large Amounts of Wind Power” is analysing existing case studies from different power systems.There are a multitude of studies made and ongoing related to cost of wind integration. However, the results are not easy to compare. This paper summarises the results from 15 case studies