A Unified Framework for the Study of Anti-Windup Designs

We present a unified framework for the study of linear time-invariant (LTI) systems subject to control input nonlinearities. The framework is based on the following two-step design paradigm: "Design the linear controller ignoring control input nonlinearities and then add anti-windup bumpless transfer (AWBT) compensation to minimize the adverse eflects of any control input nonlinearities on closed loop performance". The resulting AWBT compensation is applicable to multivariable controllers of arbitrary structure and order. All known LTI anti-windup and/or bumpless transfer compensation schemes are shown to be special cases of this framework. It is shown how this framework can handle standard issues such as the analysis of stability and performance with or without uncertainties in the plant model. The actual analysis of stability and performance, and robustness issues are problems in their own right and hence not detailed here. The main result is the unification of existing schemes for AWBT compensation under a general framework

Improved Wind Turbine Control Strategies for Maximizing Power Output and Minimizing Power Flicker

For reducing the cost of energy (COE) for wind power, controls techniques are important for enhancing energy yield, reducing structural load and improving power quality. This thesis presents the control strategies studies for wind turbine both from the perspectives of both maximizing power output and reducing power flicker and structural load, First, a self-optimizing robust control scheme is developed with the objective of maximizing the power output of a variable speed wind turbine with doubly-fed induction generator (DFIG) operated in Region 2. Wind power generation can be divided into two stages: conversion from aerodynamic power to rotor (mechanical) power and conversion from rotor power to the electrical (grid) power. In this work, the maximization of power generation is achieved by a two-loop control structure in which the power control for each stage has intrinsic synergy. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the rotor power feedback. The ESC can search for the optimal torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. In particular, an ∞ controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems. Then, a bumpless transfer scheme is proposed for inter-region controller switching scheme in order to reduce the power fluctuation and structural load under fluctuating wind conditions. This study considers the division of Region 2, Region 2.5 and Region 3 in the neighborhood of the rated wind speed. When wind, varies around the rated wind speed, the switching of control can lead to significant fluctuation in power and voltage supply, as well as structural loading. To smooth the switch and improve the tracking, two different bumpless transfer methods, Conditioning and Linear Quadratic techniques, are employed for different inter-region switching situations. The conditioning bumpless transfer approach adopted for switching between Region 2 maximum power capture controls to Region 2.5 rotor speed regulation via generator torque. For the switch between Region 2.5 and Region 3, the generator torque windup at rated value and pitch controller become online to limit the load of wind turbine. LQ technique is posed to reduce the discontinuity at the switch between torque controller and pitch controller by using an extra compensator. The flicker emission of the turbine during the switching is calculated to evaluate power fluctuation. The simulation results demonstrated the effectiveness of the proposed scheme of inter-region switching, with significant reduction of power flicker as well as the damage equivalent load

Reactive Power Resources Management in a Voltage Regulation Architecture Based on LQRI Control

The Italian transmission system's voltage control is based on its subdivision into decoupled control areas, where a hierarchical regulation architecture is applied. However, the structure and the voltage regulation of the electrical power system are being significantly impacted by the actions being taken to limit climate change. The increase in renewable energy sources exploitation is leading to a more-distributed and converter-based energy production. In addition, the forthcoming coal-fired plants shut-off will force the shift from providing regulation capability with a small number of big power plants, towards using a big number of smaller resources. Thus, in the near future a decrease in the effectiveness of the present voltage control architecture is expected. To solve such issue, a new voltage control architecture is needed, involving the more-distributed and converter-based energy production systems, as well as no longer relying on physically decoupled control areas. Therefore, in this paper a coordinated LQRI secondary voltage control is presented, able to use each grid-available reactive power source as an actuator. Furthermore, a bumpless transfer technique is proposed to solve the problem of managing a varying number of actuators (due to the reactive power resources' connection and disconnection)

Process operating mode monitoring : switching online the right controller

This paper presents a structure which deals with process operating mode monitoring and allows the control law reconfiguration by switching online the right controller. After a short review of the advances in switching based control systems during the last decade, we introduce our approach based on the definition of operating modes of a plant. The control reconfiguration strategy is achieved by online selection of an adequate controller, in a case of active accommodation. The main contribution lies in settling up the design steps of the multicontroller structure and its accurate integration in the operating mode detection and accommodation loop. Simulation results show the effectiveness of the operating mode detection and accommodation (OMDA) structure for which the design steps propose a method to study the asymptotic stability, switching performances improvement, and the tuning of the multimodel based detector

An antiwindup approach to power controller switching in an ambient healthcare network

This paper proposes a methodology for improved power controller switching in mobile Body Area Networks operating within the ambient healthcare environment. The work extends Anti-windup and Bumpless transfer results to provide a solution to the ambulatory networking problem that ensures sufficient biometric data can always be regenerated at the base station. The solution thereby guarantees satisfactory quality of service for healthcare providers. Compensation is provided for the nonlinear hardware constraints that are a typical feature of the type of network under consideration and graceful performance degradation in the face of hardware output power saturation is demonstrated, thus conserving network energy in an optimal fashion

Control of the reaching mode in variable structure systems

This paper focuses on the behaviour of variable structure systems with dynamic control, particularly during the reaching mode of operation. It is shown that stability problems may arise during this reaching phase. The causes of these problems are closely related with the problems of windup commonly found in conventional control systems with actuator constraints. Methods for stabilization of the reaching mode are proposed which are based on the concepts of 'realizable reference' and observers. Well-known algorithms that have been previously proposed from empiric ideas, can now be rigorously derived using these concepts. The theoretical framework developed by Kothare and co-workers in the context of windup is generalized to study and design control algorithms for the reaching mode.Facultad de Ingenierí

Control of the reaching mode in variable structure systems

This paper focuses on the behaviour of variable structure systems with dynamic control, particularly during the reaching mode of operation. It is shown that stability problems may arise during this reaching phase. The causes of these problems are closely related with the problems of windup commonly found in conventional control systems with actuator constraints. Methods for stabilization of the reaching mode are proposed which are based on the concepts of 'realizable reference' and observers. Well-known algorithms that have been previously proposed from empiric ideas, can now be rigorously derived using these concepts. The theoretical framework developed by Kothare and co-workers in the context of windup is generalized to study and design control algorithms for the reaching mode

Multivariable control of a nonlinear process : output prioritisation by error redistribution

Bibliography: leaves 149-154