Planning and Real Time Control of a Minimally Invasive Robotic Surgery System

This paper introduces the planning and control software of a teleoperating robotic system for minimally invasive surgery. It addresses the problem of how to organize a complex system with 41 degrees of freedom including robot setup planning, force feedback control and nullspace handling with three robotic arms. The planning software is separated into sequentially executed planning and registration procedures. An optimal setup is first planned in virtual reality and then adapted to variations in the operating room. The real time control system is composed of hierarchical layers. The design is flexible and expandable without losing performance. Structure, functionality and implementation of planning and control are described. The robotic system provides the surgeon with an intuitive hand-eye-coordination and force feedback in teleoperation for both hands

Robot Manipulators

Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world

Telemetry downlink interfaces and level-zero processing

The technical areas being investigated are as follows: (1) processing of space to ground data frames; (2) parallel architecture performance studies; and (3) parallel programming techniques. Additionally, the University administrative details and the technical liaison between New Mexico State University and Goddard Space Flight Center are addressed

On Autonomous Robotic Cooperation Capabilities within Factory and Logistic Scenarios

The paper presents the development of a unified functional, algorithmic and Software (Sw) architecture, which can be adopted as a standard for controlling, at action level only, any robotic structure within a given wide class of them; even of reconfigurable type within the class. Such control architecture is therefore deemed very suitable for operating within factory and/or logistic, possibly reconfigurable, scenarios. Moreover, for the few cases of cooperative activities to be established between agents not allowed to be cable connected, an effective coordination policy, based on the exchange of a reduced information set, only regarding the cooperation goals, is developed; and relevant simulative and experimental trials are briefly outlined. Moreover, the advantage of having, in whatever operative condition, the possibility of commanding the involved structures only in terms of the ultimate goals of each action, also seems to be the right basis for having non-negligible improvements within their integration with automated action planning, and even learning, techniques

An Analysis Review: Optimal Trajectory for 6-DOF-based Intelligent Controller in Biomedical Application

With technological advancements and the development of robots have begun to be utilized in numerous sectors, including industrial, agricultural, and medical. Optimizing the path planning of robot manipulators is a fundamental aspect of robot research with promising future prospects. The precise robot manipulator tracks can enhance the efficacy of a variety of robot duties, such as workshop operations, crop harvesting, and medical procedures, among others. Trajectory planning for robot manipulators is one of the fundamental robot technologies, and manipulator trajectory accuracy can be enhanced by the design of their controllers. However, the majority of controllers devised up to this point were incapable of effectively resolving the nonlinearity and uncertainty issues of high-degree freedom manipulators in order to overcome these issues and enhance the track performance of high-degree freedom manipulators. Developing practical path-planning algorithms to efficiently complete robot functions in autonomous robotics is critical. In addition, designing a collision-free path in conjunction with the physical limitations of the robot is a very challenging challenge due to the complex environment surrounding the dynamics and kinetics of robots with different degrees of freedom (DoF) and/or multiple arms. The advantages and disadvantages of current robot motion planning methods, incompleteness, scalability, safety, stability, smoothness, accuracy, optimization, and efficiency are examined in this paper

Advancing automation and robotics technology for the space station and for the US economy: Submitted to the United States Congress October 1, 1987

In April 1985, as required by Public Law 98-371, the NASA Advanced Technology Advisory Committee (ATAC) reported to Congress the results of its studies on advanced automation and robotics technology for use on the space station. This material was documented in the initial report (NASA Technical Memorandum 87566). A further requirement of the Law was that ATAC follow NASA's progress in this area and report to Congress semiannually. This report is the fifth in a series of progress updates and covers the period between 16 May 1987 and 30 September 1987. NASA has accepted the basic recommendations of ATAC for its space station efforts. ATAC and NASA agree that the mandate of Congress is that an advanced automation and robotics technology be built to support an evolutionary space station program and serve as a highly visible stimulator affecting the long-term U.S. economy

MODELLING AND CONTROL OF A TWO-LINK RIGID-FLEXIBLE MANIPULATOR

The literature lacks data on the reliability of 3D models created by Autodesk Inventor software and imported to MATLAB Simulink software in comparison to mathematically generated models. In this contribution, a two-link rigid-flexible manipulator modelled in two different methods was demonstrated, one of which is using Lagrange equations and Finite Element Method to generate a mathematical model of the manipulator, and the other is creating a 3D model with the aid of Autodesk Inventor then import to MATLAB Simulink, both models were subsequently controlled by three types of controllers, conventional PID controller, LQR controller, and LQG controller. The research demonstrated the performance of the two models with response to the three types of controllers. Achieved results have proven that the Autodesk Inventor is considered a reliable tool for modelling mechanical systems. Results have also confirmed that modern controllers, i.e., LQR and LQG controllers perform much better than conventional PID controllers with regards to the manipulator movement. The implementation of Autodesk Inventor along with MATLAB Simulink indicates that the Autodesk Inventor can be considered as an instrumental tool for designers and engineers. The results enable future developments in the frontier area of robotics and mechanical systems, where sophisticated models could be generated by Autodesk Inventor instead of being modelled mathematically which will benefit engineers and designers by saving time and effort consumed in modelling using mathematical equations, and by reducing the potential errors associated with such modelling technique

Modelling and control of a two-link flexible manipulator using finite element modal analysis

This thesis focuses on Finite Element (FE) modeling and robust control of a two-link flexible manipulator based on a high resolution FE model and the system vibration modes. A new FE model is derived using Euler-Bernoulli beam elements, and the model is validated using commercial software Abaqus CAE. The frequency and time domain analysis reveal that the response of the FE model substantially varies with changing the number of elements, unless a high number of elements (100 elements in this work) is used. The gap between the complexity of the high order FE model capable of predicting dynamics of the multibody system, and suitability of the model for controller design is bridged by designing control schemes based on the reduced order models obtained using modal truncation/H8 techniques. Two reduced order multi-input multi-output modal control algorithms composed of a robust feedback controller along with a feed-forward compensator are designed. The first controller, Inversion-based Two Mode Controller (ITMC), is designed using a mixed-sensitivity H8 synthesis and a modal inversion-based compensator. The second controller, Shaping Two-Mode Controller (STMC), is designed with H8 loopshaping using the modal characteristics of the system. Stability robustness against unmodelled dynamics due to the model reduction is shown using the small gain theorem. Performance of the feedback controllers are compared with Linear Quadratic Gaussian designs and are shown to have better tracking characteristics. Effectiveness of the control schemes is shown by simulation of rest-to-rest maneuver of the manipulator to a set of desired points in the joint space. The ITMC is shown to have more precise tracking performance, while STMC has higher control over vibration of the tip, at the expense of more tracking errors

Coordination control of robot manipulators using flat outputs

Published ArticleThis paper focuses on the synchronizing control of multiple interconnected flexible robotic manipulators using differential flatness theory. The flatness theory has the advantage of simplifying trajectory tracking tasks of complex mechanical systems. Using this theory, we propose a new synchronization scheme whereby a formation of flatness based systems can be stabilized using their respective flat outputs. Using the flat outputs, we eliminate the need for cross coupling laws and communication protocols associated with such formations. The problem of robot coordination is reduced to synchronizing the flat outputs between the respective robot manipulators. Furthermore, the selection of the flat output used for the synchronizing control is not restricted as any system variable can be used. The problem of unmeasured states used in the control is also solved by reconstructing the missing states using flatness based interpolation. The proposed control law is less computationally intensive when compared to earlier reported work as integration of the differential equations is not required. Simulations using a formation of single link flexible joint robots are used to validate the proposed synchronizing control

Coordination control of robot manipulators using flat outputs

Published ArticleThis paper focuses on the synchronizing control of multiple interconnected flexible robotic manipulators using differential flatness theory. The flatness theory has the advantage of simplifying trajectory tracking tasks of complex mechanical systems. Using this theory, we propose a new synchronization scheme whereby a formation of flatness based systems can be stabilized using their respective flat outputs. Using the flat outputs, we eliminate the need for cross coupling laws and communication protocols associated with such formations. The problem of robot coordination is reduced to synchronizing the flat outputs between the respective robot manipulators. Furthermore, the selection of the flat output used for the synchronizing control is not restricted as any system variable can be used. The problem of unmeasured states used in the control is also solved by reconstructing the missing states using flatness based interpolation. The proposed control law is less computationally intensive when compared to earlier reported work as integration of the differential equations is not required. Simulations using a formation of single link flexible joint robots are used to validate the proposed synchronizing control