Enhancing weak transient signals in SEVIRI false color imagery: application to dust source detection in southern Africa

A method is described to significantly enhance the signature of dust events using observations from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI). The approach involves the derivation of a composite clear-sky signal for selected channels on an individual time step and pixel basis. These composite signals are subtracted from each observation in the relevant channels to enhance weak transient signals associated with either (a) low levels of dust emission or (b) dust emissions with high salt or low quartz content. Different channel combinations, of the differenced data from the steps above, are then rendered in false color imagery for the purpose of improved identification of dust source locations and activity. We have applied this clear-sky difference (CSD) algorithm over three (globally significant) source regions in southern Africa: the Makgadikgadi Basin, Etosha Pan, and the Namibian and western South African coast. Case study analyses indicate three notable advantages associated with the CSD approach over established image rendering methods: (i) an improved ability to detect dust plumes, (ii) the observation of source activation earlier in the diurnal cycle, and (iii) an improved ability to resolve and pinpoint dust plume source locations

Simultaneous Use of Ground-Based and Satellite Observation to Evaluate Atmospheric Air Pollution over Amman, Jordan

In this study, a combination of ground-based particulate matter measurements in synergy with space-borne CALIOP lidar recordings, meteorological observations, and reanalysis models have been used to study atmospheric air pollution over Amman, Jordan. The measurement was conducted over a 24-month period spanning from January 2018 to the end of December 2019. The CALIOP aerosol profiles and aerosol layer products version 4.21, level 2, with 5 km horizontal resolution were used to evaluate the vertical structure of the atmospheric constituent over the Amman region. The particle depolarization ratio (PDR) was extracted from CALIOP recordings and has been utilized to classify the type of atmospheric aerosols. This method reveals that the atmosphere above Amman mostly contains three different aerosol types including coarse-mode dust, fine-mode dust (polluted dust), and non-dust aerosols (pollution). Aerosols with 0 < δp≤ 0.075 are categorized as pollution, aerosols with 0.075 < δp≤ 0.20 as polluted dust, and aerosols with 0.20 < δp≤ 0.40 are classified as dust. Both the one- and two-step POlarization-LIdar PHOtometer Networking (POLIPHON) approaches have been applied to the CALIOP aerosol profile product to retrieve the vertical profile of the optical and micro-physical properties of each aerosol type. Lofted-layer top heights and layer thickness in the atmosphere above Amman during the study period were also extracted from the CALIOP aerosol layer products. The highest frequency of occurrence was observed for layers with a top height of 0.5 to 2.5 km with a second smaller peak at 3.5 km. The maximum frequency of the lofted layers (40% of cases) were observed with layer thickness below 0.5 km. For layers with a top height lower than 500 m above ground level, the atmosphere was mostly impacted by polluted dust and pollution aerosols. On the other hand, for layers with a top height above 2500 m agl, the atmosphere was contaminated by depolarizing dust particles

Remote sensing of atmospheric aerosol distributions using supervised texture classification

This thesis presents a new technique to identify a 2D mask showing the extent of particulate aerosol distributions in satellite imagery. This technique uses a supervised texture classication approach, and utilises data from two distinct satellite sources. The vertical feature mask (VFM) product from the CALIPSO lidar, provides an accurate description of the aerosol content of the atmosphere but has a limited footprint and coverage. The CALIPSO VFM is used to provide training data in order to for classiers to be applied to other imagery, namely data from the spinning enhanced visible and infrared imager (SEVIRI) on the MSG satellite. The output from the classication is a 2D mask representing the locations of the particulate aerosol of interest within the SEVIRI image. This approach has been demonstrated on test cases over land and ocean, and shows a good agreement with other techniques for the detection of particulate aerosol. However, the supervised texture approach provides outputs at a higher resolution than the existing methods and the same approach is applicable over land and ocean and therefore shows the advantages compared to the current techniques. Furthermore, the coverage of the approach can be further extended using signature extension and chain classication. Signature extension was applied to one of the test cases to monitor the same geographical region with temporal extension away from the initial supervised classication. The experiments showed that it was possible to extend the coverage for ±90 minutes from the original classication and indicates the possibility of greater extension over larger temporal windows.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Orbital Observations of Dust Lofted by Daytime Convective Turbulence

Over the past several decades, orbital observations of lofted dust have revealed the importance of mineral aerosols as a climate forcing mechanism on both Earth and Mars. Increasingly detailed and diverse data sets have provided an ever-improving understanding of dust sources, transport pathways, and sinks on both planets, but the role of dust in modulating atmospheric processes is complex and not always well understood. We present a review of orbital observations of entrained dust on Earth and Mars, particularly that produced by the dust-laden structures produced by daytime convective turbulence called “dust devils”. On Earth, dust devils are thought to contribute only a small fraction of the atmospheric dust budget; accordingly, there are not yet any published accounts of their occurrence from orbit. In contrast, dust devils on Mars are thought to account for several tens of percent of the planet’s atmospheric dust budget; the literature regarding martian dust devils is quite rich. Because terrestrial dust devils may temporarily contribute significantly to local dust loading and lowered air quality, we suggest that martian dust devil studies may inform future studies of convectively-lofted dust on Earth

Lidar Measurements for Desert Dust Characterization: An Overview

We provide an overview of light detection and ranging (lidar) capability for describing and characterizing desert dust. This paper summarizes lidar techniques, observations, and fallouts of desert dust lidar measurements. The main objective is to provide the scientific community, including non-practitioners of lidar observations with a reference paper on dust lidar measurements. In particular, it will fill the current gap of communication between research-oriented lidar community and potential desert dust data users, such as air quality monitoring agencies and aviation advisory centers. The current capability of the different lidar techniques for the characterization of aerosol in general and desert dust in particular is presented. Technical aspects and required assumptions of these techniques are discussed, providing readers with the pros and cons of each technique. Information about desert dust collected up to date using lidar techniques is reviewed. Lidar techniques for aerosol characterization have a maturity level appropriate for addressing air quality and transportation issues, as demonstrated by some first results reported in this pape

The life cycle of anvil cirrus clouds from a combination of passive and active satellite remote sensing

Anvil cirrus clouds form in the upper troposphere from the outflow of ice crystals from deep convective cumulonimbus clouds. By reflecting incoming solar radiation as well as absorbing terrestrial thermal radiation, and re-emitting it at significantly lower temperatures, they play an important role for the Earth’s radiation budget. Nevertheless the processes that govern their life cycle are not well understood and, hence, they remain one of the largest uncertainties in atmospheric remote sensing and climate and weather modelling. In this thesis the temporal evolution of the anvil cirrus properties throughout their life cycle is investigated, as is their relationship with the meteorological conditions. For a comprehensive retrieval of the anvil cirrus properties, a new algorithm for the remote sensing of cirrus clouds called CiPS (Cirrus Properties from SEVIRI) is developed. Utilising a set of artificial neural networks, CiPS combines the large spatial coverage and high temporal resolution of the imaging radiometer SEVIRI aboard the geostationary satellites Meteosat Second Generation, with the high vertical resolution and sensitivity to thin cirrus clouds of the lidar CALIOP aboard the polar orbiting satellite CALIPSO. In comparison to CALIOP, CiPS detects 71 % and 95 % of all cirrus clouds with an ice optical thickness (IOT) of 0.1 and 1.0 respectively. Furthermore, CiPS retrieves the corresponding cloud top height, IOT, ice water path (IWP) and, by parameterisation, effective ice crystal radius. This way, macrophysical, microphysical and optical properties can be combined to interpret the temporal evolution of the anvil cirrus clouds. Together with a tool for identifying convective activity and a new cirrus tracking algorithm, CiPS is used to analyse the life cycle of 132 anvil cirrus clouds observed over southern Europe and northern Africa in July 2015. Although the anvil cirrus clouds grow optically thick during the convective phase, they become thinner at a rapid pace as convection ceases. Two hours after the last observed convective activity, 92±7 % of the anvil cirrus area has IOT_CiPS < 1 and IWP_CiPS < 30 g m−2 on average, with highest probability density around 0.1–0.2 and 1.5–3 g m−2 respectively. During the same time period, the cloud top height is observed to decrease. Since this is observed for both long-lived and short-lived anvil cirrus, it is deduced that in this life phase the amount of ice in the anvil is mainly controlled by sedimentation. This is in line with a corresponding decrease in the estimated effective radius. While the convective strength has no evident effect on the IOT and IWP, stronger vertical updraught is clearly correlated with higher cloud top height and larger effective radius. Larger ice crystals are, however, observed to be removed effectively within 2-3 h after convection has ceased, suggesting that the convective strength has no impact on the ice crystal sizes in ageing anvils. In this life stage, upper tropospheric relative humidity, as derived from ERA5 reanalysis data, is shown to have a larger impact on the anvil cirrus life cycle, where higher relative humidity govern larger and especially more long-lived anvil cirrus clouds

The Applicability of Remote Sensing in the Field of Air Pollution

This report prepared by KNMI and JRC is the final result of a study on the applicability of remote sensing in the field of air pollution requested by the DG Environment. The objectives of this study were to: Have an assessment of presently available scientific information on the feasibility of utilising remote sensing techniques in the implementation of existing legislation, and describe opportunities for realistic streamlining of monitoring in air quality and emissions, based on greater use of remote sensing. Have recommendations for the next policy cycle on the use of remote sensing through development of appropriate provisions and new concepts, including, if appropriate, new environmental objectives, more suited to the use of remote sensing. Have guidance on how to effectively engage with GMES and other initiatives in the air policy field projects Satellite remote sensing of the troposphere is a rapidly developing field. Today several satellite sensors are in orbit that measure trace gases and aerosol properties relevant to air quality. Satellite remote sensing data have the following unique properties: Near-simultaneous view over a large area; Global coverage; Good spatial resolution. The properties of satellite data are highly complementary to ground-based in-situ networks, which provide detailed measurements at specific locations with a high temporal resolution. Although satellite data have distinct benefits, the interpretation is often less straightforward as compared to traditional in-situ measurements. Maps of air pollution measured from space are widespread in the scientific community as well as in the media, and have had a strong impact on the general public and the policy makers. The next step is to make use of satellite data in a quantitative way. Applications based solely on satellite data are foreseen, however an integrated approach using satellite data, ground-based data and models combined with data assimilation, will make the best use of the satellite remote-sensing potential, as well as of the synergy with ground-based observations.JRC.H.4-Transport and air qualit