Cooperative Authentication in Underwater Acoustic Sensor Networks

With the growing use of underwater acoustic communications (UWAC) for both industrial and military operations, there is a need to ensure communication security. A particular challenge is represented by underwater acoustic networks (UWANs), which are often left unattended over long periods of time. Currently, due to physical and performance limitations, UWAC packets rarely include encryption, leaving the UWAN exposed to external attacks faking legitimate messages. In this paper, we propose a new algorithm for message authentication in a UWAN setting. We begin by observing that, due to the strong spatial dependency of the underwater acoustic channel, an attacker can attempt to mimic the channel associated with the legitimate transmitter only for a small set of receivers, typically just for a single one. Taking this into account, our scheme relies on trusted nodes that independently help a sink node in the authentication process. For each incoming packet, the sink fuses beliefs evaluated by the trusted nodes to reach an authentication decision. These beliefs are based on estimated statistical channel parameters, chosen to be the most sensitive to the transmitter-receiver displacement. Our simulation results show accurate identification of an attacker's packet. We also report results from a sea experiment demonstrating the effectiveness of our approach.Comment: Author version of paper accepted for publication in the IEEE Transactions on Wireless Communication

UNDERWATER COMMUNICATIONS WITH ACOUSTIC STEGANOGRAPHY: RECOVERY ANALYSIS AND MODELING

In the modern warfare environment, communication is a cornerstone of combat competence. However, the increasing threat of communications-denied environments highlights the need for communications systems with low probability of intercept and detection. This is doubly true in the subsurface environment, where communications and sonar systems can reveal the tactical location of platforms and capabilities, subverting their covert mission set. A steganographic communication scheme that leverages existing technologies and unexpected data carriers is a feasible means of increasing assurance of communications, even in denied environments. This research works toward a covert communication system by determining and comparing novel symbol recovery schemes to extract data from a signal transmitted under a steganographic technique and interfered with by a simulated underwater acoustic channel. We apply techniques for reliably extracting imperceptible information from unremarkable acoustic events robust to the variability of the hostile operating environment. The system is evaluated based on performance metrics, such as transmission rate and bit error rate, and we show that our scheme is sufficient to conduct covert communications through acoustic transmissions, though we do not solve the problems of synchronization or equalization.Lieutenant, United States NavyApproved for public release. Distribution is unlimited

Algorithms for propagation-aware underwater ranging and localization

Mención Internacional en el título de doctorWhile oceans occupy most of our planet, their exploration and conservation are one of the crucial research problems of modern time. Underwater localization stands among the key issues on the way to the proper inspection and monitoring of this significant part of our world. In this thesis, we investigate and tackle different challenges related to underwater ranging and localization. In particular, we focus on algorithms that consider underwater acoustic channel properties. This group of algorithms utilizes additional information about the environment and its impact on acoustic signal propagation, in order to improve the accuracy of location estimates, or to achieve a reduced complexity, or a reduced amount of resources (e.g., anchor nodes) compared to traditional algorithms. First, we tackle the problem of passive range estimation using the differences in the times of arrival of multipath replicas of a transmitted acoustic signal. This is a costand energy- effective algorithm that can be used for the localization of autonomous underwater vehicles (AUVs), and utilizes information about signal propagation. We study the accuracy of this method in the simplified case of constant sound speed profile (SSP) and compare it to a more realistic case with various non-constant SSP. We also propose an auxiliary quantity called effective sound speed. This quantity, when modeling acoustic propagation via ray models, takes into account the difference between rectilinear and non-rectilinear sound ray paths. According to our evaluation, this offers improved range estimation results with respect to standard algorithms that consider the actual value of the speed of sound. We then propose an algorithm suitable for the non-invasive tracking of AUVs or vocalizing marine animals, using only a single receiver. This algorithm evaluates the underwater acoustic channel impulse response differences induced by a diverse sea bottom profile, and proposes a computationally- and energy-efficient solution for passive localization. Finally, we propose another algorithm to solve the issue of 3D acoustic localization and tracking of marine fauna. To reach the expected degree of accuracy, more sensors are often required than are available in typical commercial off-the-shelf (COTS) phased arrays found, e.g., in ultra short baseline (USBL) systems. Direct combination of multiple COTS arrays may be constrained by array body elements, and lead to breaking the optimal array element spacing, or the desired array layout. Thus, the application of state-of-the-art direction of arrival (DoA) estimation algorithms may not be possible. We propose a solution for passive 3D localization and tracking using a wideband acoustic array of arbitrary shape, and validate the algorithm in multiple experiments, involving both active and passive targets.Part of the research in this thesis has been supported by the EU H2020 program under project SYMBIOSIS (G.A. no. 773753).This work has been supported by IMDEA Networks InstitutePrograma de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Paul Daniel Mitchell.- Secretario: Antonio Fernández Anta.- Vocal: Santiago Zazo Bell

Optimum receiver design for broadband Doppler compensation in multipath/Doppler channels with rational orthogonal wavelet signaling

Copyright © 2007 IEEEIn this paper, we address the issue of signal transmission and Doppler compensation in multipath/Doppler channels. Based on a wavelet-based broadband Doppler compensation structure, this paper presents the design and performance characterization of optimum receivers for this class of communication systems. The wavelet-based Doppler compensation structure takes account of the coexistence of multiple Doppler scales in a multipath/Doppler channel and captures the information carried by multiple scaled replicas of the transmitted signal rather than an estimation of an average Doppler as in conventional Doppler compensation schemes. The transmitted signal is recovered by the perfect reconstruction (PR) wavelet analysis filter bank (FB). We demonstrate that with rational orthogonal wavelet signaling, the proposed communication structure corresponds to a Lth-order diversity system, where L is the number of dominant transmission paths. Two receiver designs for pulse amplitude modulation (PAM) signal transmission are presented. Both receiver designs are optimal under the maximum-likelihood (ML) criterion for diversity combination and symbol detection. Good performance is achieved for both receivers in combating the Doppler effect and intersymbol interference (ISI) caused by multipath while mitigating the channel noise. In particular, the second receiver design overcomes symbol timing sensitivities present in the first design at reasonable cost to performance.Limin Yu and Langford B. Whit

Multiple-Resampling Receiver Design for OFDM Over Doppler-Distorted Underwater Acoustic Channels

Cataloged from PDF version of article.In this paper, we focus on orthogonal frequency-divisionmultiplexing (OFDM) receiver designs for underwater acoustic (UWA) channels with user- and/or path-specific Doppler scaling distortions. The scenario is motivated by the cooperative communications framework, where distributed transmitter/receiver pairs may experience significantly different Doppler distortions, as well as by the single-user scenarios, where distinct Doppler scaling factors may exist among different propagation paths. The conventional approach of front–end resampling that corrects for common Doppler scalingmay not be appropriatein such scenarios, rendering a post-fast-Fourier-transform (FFT) signal that is contaminated by user- and/or path-specific intercarrier interference. To counteract this problem, we propose a family of front–end receiver structures thatutilizemultiple-resampling (MR)branches,eachmatched to the Doppler scaling factor of a particular user and/or path. Following resampling, FFT modules transform the Doppler-compensated signals into the frequency domain for further processing through linear or nonlinear detection schemes. As part of the overall receiver structure, a gradient–descent approachis also proposed to refine the channel estimates obtained by standard sparse channel estimators. The effectiveness and robustness of the proposed receivers are demonstrated via simulations, as well as emulations based on real data collected during the 2010 Mobile Acoustic Communications Experiment (MACE10, Martha’s Vineyard, MA) and the 2008 Kauai Acomms MURI (KAM08, Kauai, HI) experiment

Amplitude and phase sonar calibration and the use of target phase for enhanced acoustic target characterisation

This thesis investigates the incorporation of target phase into sonar signal processing, for enhanced information in the context of acoustical oceanography. A sonar system phase calibration method, which includes both the amplitude and phase response is proposed. The technique is an extension of the widespread standard-target sonar calibration method, based on the use of metallic spheres as standard targets. Frequency domain data processing is used, with target phase measured as a phase angle difference between two frequency components. This approach minimizes the impact of range uncertainties in the calibration process. Calibration accuracy is examined by comparison to theoretical full-wave modal solutions. The system complex response is obtained for an operating frequency of 50 to 150 kHz, and sources of ambiguity are examined. The calibrated broadband sonar system is then used to study the complex scattering of objects important for the modelling of marine organism echoes, such as elastic spheres, fluid-filled shells, cylinders and prolate spheroids. Underlying echo formation mechanisms and their interaction are explored. Phase-sensitive sonar systems could be important for the acquisition of increased levels of information, crucial for the development of automated species identification. Studies of sonar system phase calibration and complex scattering from fundamental shapes are necessary in order to incorporate this type of fully-coherent processing into scientific acoustic instruments

Vector sensors for underwater : acoustic communications

Acoustic vector sensors measure acoustic pressure and directional components separately. A claimed advantage of vector sensors over pressure-only arrays is the directional information in a collocated device, making it an attractive option for size-restricted applications. The employment of vector sensors as a receiver for underwater communications is relatively new, where the inherent directionality, usually related to particle velocity, is used for signal-to-noise gain and intersymbol interference mitigation. The fundamental question is how to use vector sensor directional components to bene t communications, which this work seeks to answer and to which it contributes by performing: analysis of acoustic pressure and particle velocity components; comparison of vector sensor receiver structures exploring beamforming and diversity; quanti cation of adapted receiver structures in distinct acoustic scenarios and using di erent types of vector sensors. Analytic expressions are shown for pressure and particle velocity channels, revealing extreme cases of correlation between vector sensors' components. Based on the correlation hypothesis, receiver structures are tested with simulated and experimental data. In a rst approach, called vector sensor passive time-reversal, we take advantage of the channel diversity provided by the inherent directivity of vector sensors' components. In a second approach named vector sensor beam steering, pressure and particle velocity components are combined, resulting in a steered beam for a speci c direction. At last, a joint beam steering and passive time-reversal is proposed, adapted for vector sensors. Tested with two distinct experimental datasets, where vector sensors are either positioned on the bottom or tied to a vessel, a broad performance comparison shows the potential of each receiver structure. Analysis of results suggests that the beam steering structure is preferable for shorter source-receiver ranges, whereas the passive time-reversal is preferable for longer ranges. Results show that the joint beam steering and passive time-reversal is the best option to reduce communication error with robustness along the range.Sensores vetoriais acústicos (em inglês, acoustic vector sensors) são dispositivos que medem, alem da pressão acústica, a velocidade de partícula. Esta ultima, é uma medida que se refere a um eixo, portando, esta associada a uma direção. Ao combinar pressão acústica com componentes de velocidade de partícula pode-se estimar a direção de uma fonte sonora utilizando apenas um sensor vetorial. Na realidade, \um" sensor vetorial é composto de um sensor de pressão (hidrofone) e um ou mais sensores que medem componentes da velocidade de partícula. Como podemos notar, o aspecto inovador está na medição da velocidade de partícula, dado que os hidrofones já são conhecidos.(...)This PhD thesis was supported by the Brazilian Navy Postgraduate Study Abroad Program Port. 227/MB-14/08/2019

Underwater Localization in Complex Environments

A capacidade de um veículo autónomo submarino (AUV) se localizar num ambiente complexo, bem como de extrair características relevantes do mesmo, é de grande importância para o sucesso da navegação. No entanto, esta tarefa é particularmente desafiante em ambientes subaquáticos devido à rápida atenuação sofrida pelos sinais de sistemas de posicionamento global ou outros sinais de radiofrequência, dispersão e reflexão, sendo assim necessário o uso de processos de filtragem. Ambiente complexo é definido aqui como um cenário com objetos destacados das paredes, por exemplo, o objeto pode ter uma certa variabilidade de orientação, portanto a sua posição nem sempre é conhecida. Exemplos de cenários podem ser um porto, um tanque ou mesmo uma barragem, onde existem paredes e dentro dessas paredes um AUV pode ter a necessidade de se localizar de acordo com os outros veículos na área e se posicionar em relação ao mesmo e analisá-lo. Os veículos autónomos empregam muitos tipos diferentes de sensores para localização e percepção dos seus ambientes e dependem dos computadores de bordo para realizar tarefas de direção autónoma. Para esta dissertação há um problema concreto a resolver, localizar um cabo suspenso numa coluna de água em uma região conhecida do mar e navegar de acordo com ela. Embora a posição do cabo no mundo seja bem conhecida, a dinâmica do cabo não permite saber exatamente onde ele está. Assim, para que o veículo se localize de acordo com este para que possa ser inspecionado, a localização deve ser baseada em sensores ópticos e acústicos. Este estudo explora o processamento e a análise de imagens óticas e acústicas, por meio dos dados adquiridos através de uma câmara e por um sonar de varrimento mecânico (MSIS),respetivamente, a fim de extrair características ambientais relevantes que possibilitem a estimação da localização do veículo. Os pontos de interesse extraídos de cada um dos sensores são utilizados para alimentar um estimador de posição, implementando um Filtro de Kalman Extendido (EKF), de modo a estimar a posição do cabo e através do feedback do filtro melhorar os processos de extração de pontos de interesse utilizados.The ability of an autonomous underwater vehicle (AUV) to locate itself in a complex environment as well as to detect relevant environmental features is of crucial importance for successful navigation. However, it's particularly challenging in underwater environments due to the rapid attenuation suffered by signals from global positioning systems or other radio frequency signals, dispersion and reflection thus needing a filtering process. Complex environment is defined here as a scenario with objects detached from the walls, for example the object can have a certain orientation variability therefore its position is not always known. Examples of scenarios can be a harbour, a tank or even a dam reservoir, where there are walls and within those walls an AUV may have the need to localize itself according to the other vehicles in the area and position itself relative to one to observe, analyse or scan it. Autonomous vehicles employ many different types of sensors for localization and perceiving their environments and they depend on the on-board computers to perform autonomous driving tasks. For this dissertation there is a concrete problem to solve, which is to locate a suspended cable in a water column in a known region in the sea and navigate according to it. Although the cable position in the world is well known, the cable dynamics does not allow knowing where it is exactly. So, in order to the vehicle localize itself according to it so it can be inspected, the localization has to be based on optical and acoustic sensors. This study explores the processing and analysis of optical and acoustic images, through the data acquired through a camera and by a mechanical scanning sonar (MSIS), respectively, in order to extract relevant environmental characteristics that allow the estimation of the location of the vehicle. The points of interest extracted from each of the sensors are used to feed a position estimator, by implementing an Extended Kalman Filter (EKF), in order to estimate the position of the cable and through the feedback of the filter improve the extraction processes of points of interest used

Study of acoustic signals for the neutrino detector AMADEUS-ANTARES

Este proyecto estudia aspectos acústicos pertenecientes al proyecto europeo ANTARES. Por una parte, se centra en el análisis de las señales acústicas recibidas en el sistema de posicionamiento AMADEUS-ANTARES. El programa analiza las señales captadas por los sensores, las analiza de manera individual, aplicando una serie de filtros y transformaciones, extrayendo, la frecuencia, fase y amplitud propia de la señal. A continuación, fija el tiempo de subida y de bajada apropiado para la señal, con el que se obtiene su duración. La aplicación es diseñada con objetivo de automatizar la detección y análisis de las señales recibidas del sistema, consiguiendo mayor precisión en la reconstrucción del posicionamiento de fuentes. Por otra parte, se lleva a cabo el diseño y calibración de un array lineal de ocho hidrófonos que genera, de manera artificial, el pulso bipolar de energía ultra alta generado por el neutrino en su interacción con el agua. El objetivo del array es transmitir al detector acústico de ANTARES la señal bipolar con similares características en amplitud, forma y directividad a la señal acústica creada por el neutrino en el agua. La calibración es desarrollada combinando métodos de procesado de señal junto con medidas experimentales. El array de hidrófonos es posicionado coherentemente en fase, a distancias conocidas. Aplicado el "delay" correspondiente, la señal acústica bipolar es obtenida con mayor amplitud y directividad. La simulación del array acústico es estudiada con el objetivo de conocer la longitud y diseño idóneo para la correcta transmisión de la señal bipolar hasta el detector. This academic work study acoustic aspects of the ANTARES detector European project. For the one hand, the signal analysis processing for the acoustic signals received by the AMADEUS-ANTARES. The software developed analyses the received signal of each sensor and analyses them individually, applying specific filters and transformations in the frequency and time domain, getting the phase, frequency and amplitude belonged to the signal. For the next step, it fixes the Rise Time and Fall Time appropriated for the signal what with is obtained the signal duration. The application is developed for automating the detection and analysis of the received signals from the positioning system, achieving higher accuracy. For the other hand, an eight lineal array hydrophone is designed and calibrated for generate the artificial Ultra High Energy (UHE) neutrino-induced pulses. The array goal is the transmission of the bipolar acoustic signal pulse mimicking (simulating) the neutrino acoustic signal in terms of amplitude, shape and directivity to the ANTARES detector. The calibration is developed using signal processing methods within experimental measures. The array hydrophone is located coherently in phase with known distances. Hence, the delay between them is applied to get a higher amplitude and directivity acoustic bipolar pulse. The acoustic array simulation is studied in order to know the length and design for the proper bipolar signal transmission to the detector.Saldaña Coscollar, M. (2011). Study of acoustic signals for the neutrino detector AMADEUS-ANTARES. Universitat Politècnica de València. http://hdl.handle.net/10251/14132Archivo delegad