PRELIMINARY FINDINGS OF A POTENZIATED PIEZOSURGERGICAL DEVICE AT THE RABBIT SKULL

The number of available ultrasonic osteotomes has remarkably increased. In vitro and in vivo studies have revealed differences between conventional osteotomes, such as rotating or sawing devices, and ultrasound-supported osteotomes (Piezosurgery®) regarding the micromorphology and roughness values of osteotomized bone surfaces. Objective: the present study compares the micro-morphologies and roughness values of osteotomized bone surfaces after the application of rotating and sawing devices, Piezosurgery Medical® and Piezosurgery Medical New Generation Powerful Handpiece. Methods: Fresh, standard-sized bony samples were taken from a rabbit skull using the following osteotomes: rotating and sawing devices, Piezosurgery Medical® and a Piezosurgery Medical New Generation Powerful Handpiece. The required duration of time for each osteotomy was recorded. Micromorphologies and roughness values to characterize the bone surfaces following the different osteotomy methods were described. The prepared surfaces were examined via light microscopy, environmental surface electron microscopy (ESEM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM) and atomic force microscopy. The selective cutting of mineralized tissues while preserving adjacent soft tissue (dura mater and nervous tissue) was studied. Bone necrosis of the osteotomy sites and the vitality of the osteocytes near the sectional plane were investigated, as well as the proportion of apoptosis or cell degeneration. Results and Conclusions: The potential positive effects on bone healing and reossification associated with different devices were evaluated and the comparative analysis among the different devices used was performed, in order to determine the best osteotomes to be employed during cranio-facial surgery

Physical and statistical shape modelling in craniomaxillofacial surgery: a personalised approach for outcome prediction

Orthognathic surgery involves repositioning of the jaw bones to restore face function and shape for patients who require an operation as a result of a syndrome, due to growth disturbances in childhood or after trauma. As part of the preoperative assessment, three-dimensional medical imaging and computer-assisted surgical planning help to improve outcomes, and save time and cost. Computer-assisted surgical planning involves visualisation and manipulation of the patient anatomy and can be used to aid objective diagnosis, patient communication, outcome evaluation, and surgical simulation. Despite the benefits, the adoption of three-dimensional tools has remained limited beyond specialised hospitals and traditional two-dimensional cephalometric analysis is still the gold standard. This thesis presents a multidisciplinary approach to innovative surgical simulation involving clinical patient data, medical image analysis, engineering principles, and state-of-the-art machine learning and computer vision algorithms. Two novel three-dimensional computational models were developed to overcome the limitations of current computer-assisted surgical planning tools. First, a physical modelling approach – based on a probabilistic finite element model – provided patient-specific simulations and, through training and validation, population-specific parameters. The probabilistic model was equally accurate compared to two commercial programs whilst giving additional information regarding uncertainties relating to the material properties and the mismatch in bone position between planning and surgery. Second, a statistical modelling approach was developed that presents a paradigm shift in its modelling formulation and use. Specifically, a 3D morphable model was constructed from 5,000 non-patient and orthognathic patient faces for fully-automated diagnosis and surgical planning. Contrary to traditional physical models that are limited to a finite number of tests, the statistical model employs machine learning algorithms to provide the surgeon with a goal-driven patient-specific surgical plan. The findings in this thesis provide markers for future translational research and may accelerate the adoption of the next generation surgical planning tools to further supplement the clinical decision-making process and ultimately to improve patients’ quality of life

Review on Augmented Reality in Oral and Cranio-Maxillofacial Surgery: Toward 'Surgery-Specific' Head-Up Displays

In recent years, there has been an increasing interest towards the augmented reality as applied to the surgical field. We conducted a systematic review of literature classifying the augmented reality applications in oral and cranio-maxillofacial surgery (OCMS) in order to pave the way to future solutions that may ease the adoption of AR guidance in surgical practice. Publications containing the terms 'augmented reality' AND 'maxillofacial surgery', and the terms 'augmented reality' AND 'oral surgery' were searched in the PubMed database. Through the selected studies, we performed a preliminary breakdown according to general aspects, such as surgical subspecialty, year of publication and country of research; then, a more specific breakdown was provided according to technical features of AR-based devices, such as virtual data source, visualization processing mode, tracking mode, registration technique and AR display type. The systematic search identified 30 eligible publications. Most studies (14) were in orthognatic surgery, the minority (2) concerned traumatology, while 6 studies were in oncology and 8 in general OCMS. In 8 of 30 studies the AR systems were based on a head-mounted approach using smart glasses or headsets. In most of these cases (7), a video-see-through mode was implemented, while only 1 study described an optical-see-through mode. In the remaining 22 studies, the AR content was displayed on 2D displays (10), full-parallax 3D displays (6) and projectors (5). In 1 case the AR display type is not specified. AR applications are of increasing interest and adoption in oral and cranio-maxillofacial surgery, however, the quality of the AR experience represents the key requisite for a successful result. Widespread use of AR systems in the operating room may be encouraged by the availability of 'surgery-specific' head-mounted devices that should guarantee the accuracy required for surgical tasks and the optimal ergonomics

Implications from precision surgical anatomy for modern craniofacial pediatrics

Orofacial cleft is the most common craniofacial birth anomaly. The comprehensive care of patients with craniofacial anomalies requires a multidisciplinary approach, beginning with prenatal counseling and continuing throughout life. After birth, presurgical treatments aim to correct the imbalance of forces caused by the cleft. Surgery for cleft repair is usually performed in multiple stages, with cleft lip repair performed first, followed by cleft palate repair. However, several single-stage repair techniques have been developed. This approach involves simultaneous cleft lip and palate repair, thereby reducing the need for additional surgeries. The University Center for Cleft Lip and Palate and Craniofacial Anomalies in Basel has a long-standing history of simultaneous cleft lip and palate repair. However, conducting evidence-based studies on cleft surgery is challenging due to the rarity and variability of the malformation and the many treatment concepts. As cleft surgery undergoes continuous refinement based on outcome assessment and latest evidence, the primary aim of this PhD project was to quantify the impact on craniofacial growth of simultaneous unilateral cleft lip and palate repair. The study discussed in section 4 compared two cohorts, one with and one without primary alveolar bone grafting, and evaluated craniofacial growth, dental arch relationship, and palatal morphology. Results showed that omitting primary alveolar bone grafting did not improve craniofacial growth outcomes at the patients’ age of 6-11 years, suggesting that other surgical aspects may have a greater impact on craniofacial growth. The second study, discussed in section 5, aimed to add new evidence for a better understanding of the curved vomerine mucosa in cleft repair. The curved vomer, a key region in unilateral cleft lip and palate, has been a subject of surgical controversy with sparse evidence. The study examined for the first time the histology of curved vomerine mucosa samples and found that they did not exhibit any specific signs of nasal mucosa. This suggests that the use of vomerine mucosa in cleft repair should not be based on fixed physiological beliefs and calls for a rethinking of the anatomy and paved the way for new surgical techniques in this region. The third study, presented in section 6, assessed a new surgical technique, developed on the findings from section 5 and based on pure anatomic rearrangement of curved vomerine tissue for cleft palate closure. By this, a simultaneous continuous circular two-layer closure of unilateral cleft lip and palate has been achieved. The study assessed the safety, wound healing, and cleft width changes with presurgical passive plate therapy in patients undergoing this new surgical method. This study comprehensively demonstrates the potential of a simultaneous continuous circular closure technique for unilateral cleft lip and palate. However, further research is needed to evaluate long-term outcomes. Overall, this PhD project aimed to contribute to the understanding and improvement of cleft surgery and outcomes in simultaneous cleft lip and palate repair

Computer-aided position planning of miniplates to treat facial bone defects

In this contribution, a software system for computer-aided position planning of miniplates to treat facial bone defects is proposed. The intra-operatively used bone plates have to be passively adapted on the underlying bone contours for adequate bone fragment stabilization. However, this procedure can lead to frequent intra-operatively performed material readjustments especially in complex surgical cases. Our approach is able to fit a selection of common implant models on the surgeon's desired position in a 3D computer model. This happens with respect to the surrounding anatomical structures, always including the possibility of adjusting both the direction and the position of the used osteosynthesis material. By using the proposed software, surgeons are able to pre-plan the out coming implant in its form and morphology with the aid of a computer-visualized model within a few minutes. Further, the resulting model can be stored in STL file format, the commonly used format for 3D printing. Using this technology, surgeons are able to print the virtual generated implant, or create an individually designed bending tool. This method leads to adapted osteosynthesis materials according to the surrounding anatomy and requires further a minimum amount of money and time.Comment: 19 pages, 13 Figures, 2 Table

Simulation Guided Navigation in cranio-maxillo-facial surgery: a new approach to improve intraoperative three-dimensional accuracy and reproducibility during surgery.

The aim of this PhD thesis " Simulation Guided Navigation in cranio- maxillo- facial surgery : a new approach to Improve intraoperative three-dimensional accuracy and reproducibility during surgery ." was at the center of its attention the various applications of a method introduced by our School in 2010 and has as its theme the increase of interest of reproducibility of surgical programs through methods that in whole or in part are using intraoperative navigation. It was introduced in Orthognathic Surgery Validation a new method for the interventions carried out according to the method Simulation Guided Navigation in facial deformities ; was then analyzed the method of three-dimensional control of the osteotomies through the use of templates and cutting of plates using the method precontoured CAD -CAM and laser sintering . It was finally proceeded to introduce the method of piezonavigated surgery in the various branches of maxillofacial surgery . These studies have been subjected to validation processes and the results are presented .Obiettivo di questa tesi di Dottorato “Simulation Guided Navigation in cranio-maxillo-facial surgery: a new approach to improve intraoperative three-dimensional accuracy and reproducibility during surgery.” ha avuto al centro delle proprie attenzioni le varie applicazioni di una metodica introdotta dalla ns. Scuola nel 2010 e che ha come tema di interesse l’aumento delle riproducibilità dei programmi chirurgici mediante metodiche che in toto o in parte utilizzano il navigatore intraoperatorio. Si è introdotto in Chirurgia Ortognatica un nuovo Metodo di Validazione per gli interventi effettuati secondo la metodica Simulation Guided Navigation nelle malformazioni facciali ; si è poi analizzata la metodica di controllo tridimensionale delle osteotomie mediante l’utilizzo delle dime di taglio e delle placche premodellate mediante metodica CAD-CAM e sinterizzazione laser. Si è infine proceduto ad introdurre la metodica di chirurgia piezonavigata alle varie branche di chirurgia maxillo-facciale. Tali studi sono stati sottoposti a processi di validazione ed i risultati vengono presentati

Custom-Made Alloplastic Prosthetic Implant to Treat Temporomandibular Joint Ankylosis in Pediatric Patients: A Case Study

Temporomandibular Joint (TMJ) ankylosis represents a fairly common condition which surgeons need to face. According to Rowe, it can be defined as a restricted functional capacity of the jaw with limited movements owing to bony or fibrous adhesions between the condyle and either glenoid fossa, disc or eminence (or both). It can become a disease which impacts patients' daily life, who suffer from limited mandibular excursion with reduced intercisal opening, anterior open bite, inability to swallow, sleep disorders, and speech problems. In children this may also result in abnormal mandibular and facial growth. In this paper, we deal with the case of a child with an important momolateral ankylosis, previously treated surgically with Costochondral Grafting arthroplasty without success and subsequently treated with a custom-made prosthesis

3D-printing techniques in a medical setting : a systematic literature review

Background: Three-dimensional (3D) printing has numerous applications and has gained much interest in the medical world. The constantly improving quality of 3D-printing applications has contributed to their increased use on patients. This paper summarizes the literature on surgical 3D-printing applications used on patients, with a focus on reported clinical and economic outcomes. Methods: Three major literature databases were screened for case series (more than three cases described in the same study) and trials of surgical applications of 3D printing in humans. Results: 227 surgical papers were analyzed and summarized using an evidence table. The papers described the use of 3D printing for surgical guides, anatomical models, and custom implants. 3D printing is used in multiple surgical domains, such as orthopedics, maxillofacial surgery, cranial surgery, and spinal surgery. In general, the advantages of 3D-printed parts are said to include reduced surgical time, improved medical outcome, and decreased radiation exposure. The costs of printing and additional scans generally increase the overall cost of the procedure. Conclusion: 3D printing is well integrated in surgical practice and research. Applications vary from anatomical models mainly intended for surgical planning to surgical guides and implants. Our research suggests that there are several advantages to 3D- printed applications, but that further research is needed to determine whether the increased intervention costs can be balanced with the observable advantages of this new technology. There is a need for a formal cost-effectiveness analysis

Genioplasty with surgical guide using 3D-printing technology : a systematic review

The purpose of this systematic review is to evaluate the current state of the art of making genioplasties using 3D printing technology. A multi-database single-reviewer systematic review identified sixteen papers that fulfilled the selection criteria. There were mainly case series and case reports available (Level IV of the Oxford Evidence-based medicine scale); only two prospective study (Level III) evaluated this subject. These articles are analyzed in details and summarized in this review. The realization of genioplasties with surgical guide using 3D-printing technology could improve predictability and accuracy. It protects anatomical structures in the environment of the surgery, reducing by this way the morbidity and providing safer results. The type of printer and material used as well as the sterilization techniques should be further developed by the authors. The use of open-access software should also be further explored to allow the use of these new technologies by the largest number of surgeons. Finally, prospective multi-center studies with larger samples should be performed to definitively conclude the benefits of this new technology and allow for its routine use. This article is the first systematic review on this topic