18th IEEE Workshop on Nonlinear Dynamics of Electronic Systems: Proceedings

Proceedings of the 18th IEEE Workshop on Nonlinear Dynamics of Electronic Systems, which took place in Dresden, Germany, 26 – 28 May 2010.:Welcome Address ........................ Page I Table of Contents ........................ Page III Symposium Committees .............. Page IV Special Thanks ............................. Page V Conference program (incl. page numbers of papers) ................... Page VI Conference papers Invited talks ................................ Page 1 Regular Papers ........................... Page 14 Wednesday, May 26th, 2010 ......... Page 15 Thursday, May 27th, 2010 .......... Page 110 Friday, May 28th, 2010 ............... Page 210 Author index ............................... Page XII

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters

Engineering Education and Research Using MATLAB

MATLAB is a software package used primarily in the field of engineering for signal processing, numerical data analysis, modeling, programming, simulation, and computer graphic visualization. In the last few years, it has become widely accepted as an efficient tool, and, therefore, its use has significantly increased in scientific communities and academic institutions. This book consists of 20 chapters presenting research works using MATLAB tools. Chapters include techniques for programming and developing Graphical User Interfaces (GUIs), dynamic systems, electric machines, signal and image processing, power electronics, mixed signal circuits, genetic programming, digital watermarking, control systems, time-series regression modeling, and artificial neural networks

Conducted and Radiated EMI Measurements of Parallel Buck Converters Under Varying Spread Spectrum Parameters

The Conducted and Radiated EMI Measurements with Parallel Buck Converters Under Varying Spread Spectrum Parameters research senior project aims to explore the effects from Spread Spectrum Frequency Modulation (SSFM) on the input electromagnetic interference (EMI) or noise of a switching power supply, specifically with LM53601MAEVM hardware. The input EMI is important as the main input bus needs to be clean to provide a reliable source for other sensitive devices connected to it. SSFM can replace a conventional EMI filter and save weight, space, and cost. This project provides a basis in terms of the impacts of variable SSFM in simulation in order to provide an idea for its best application in future hardware implementations. The input voltage requirement for the buck converter is from 5V to 42V with output voltage of 3.6V and maximum output current of 1A. The buck converter should vary the percent modulation of the SSFM for up to +/-4%. Auxiliary circuits that will produce the necessary control signals for varying the percent modulation of SSFM were developed. Simulating LM53601MAEVM hardware with SSFM was not efficient as it required a significant amount of time and computational power. Overall, in terms of EMI, none of the simulations passed automotive CISPR standards, which is one of the potential LM53601 applications. The best results in simulation were at lower input voltages, mid-range loads, and low percentage of SSFM spread. Since EMI depends on layout, physical hardware measurements could provide further insight into the impact of variable SSFM

High Efficiency Power Supplies for Multi-mode RF Power Amplifiers in Cellular Handset Applications

Cellular handset evolution requires the front end transmitter to support multiple 3G/4G bands for global roaming, and also to be backward compatible with the existing 2G (quad-band GSM/EDGE) network. The cost and size would be prohibitive if one power amplifier (PA) only supports one band or if multiple supplies are required for multiple PAs. Solutions of interest are based on multi-standard multi-band PAs (e.g. 2 multi-mode PAs instead of 8+ mode-specific PAs), and an efficient power supply that supports these multi-mode PAs. The thesis starts with a study of PA supply architectures and DC-DC converters. A series architecture consisting of a boost converter followed by a buck converter has advantages of low-noise buck converter output, together with the ability to deliver full power at low battery voltages to extend the battery life. The buck converter presents a constant power load for the boost converter, which raises stability concerns. Small-signal control-to-output transfer functions are derived for peak or valley current mode controlled boost converter with a downstream regulated converter modeled as constant power load. It is shown how current mode control provides active damping to ensure stability and well-behaved dynamic response. Furthermore, it is shown how load current feedforward presents an effective way to improve power load transient response. Modeling and design approaches are validated by test circuit simulations, demonstrating stable operations using current mode control under constant power loads, and improved power step load transient response based on load current feedforward. A buck/boost and LDO series architecture is proposed as the solution to address efficiency, linearity, noise and time mask requirements for the supplies supporting multi-standard, multi-band PAs. A monolithic integrated circuit (IC) has been designed and implemented in a standard 0.5 5V CMOS process for supplying the multi-mode PAs. The buck/boost converter with wide output range delivers the peak efficiency of 92%. The power LDO has 1-4 MHz bandwidth, to support the GSM/EDGE/WCDMA time mask requirements and the polar EDGE operation. The test chip consumes the quiescent current 1.1 mA, and it delivers maximum 5 W output

Synchronization and prediction of chaotic dynamics on networks of optoelectronic oscillators

The subject of this thesis is the exploration of chaotic synchronization for novel applications including time-series prediction and sensing. We begin by characterizing the nonlinear dynamics of an optoelectronic time-delayed feedback loop. We show that synchronization of an accurate numerical model to experimental measurements provides a way to assimilate data and forecast the future of deterministic chaotic behavior. Next, we implement an adaptive control method that maintains isochronal synchrony for a network of coupled feedback loops when the interaction strengths are unknown and time-varying. Control signals are used as real-time estimates of the variations present within the coupling paths. We analyze the stability of synchronous solutions for arbitrary coupling topologies via a modified master stability function that incorporates the adaptation response dynamics. Finally, we show that the master stability function, which is derived from a set of linearized equations, can also be experimentally measured using a two-node network, and it can be applied to predict the convergence behavior of large networks

Control of chaos in nonlinear circuits and systems

Nonlinear circuits and systems, such as electronic circuits (Chapter 5), power converters (Chapter 6), human brains (Chapter 7), phase lock loops (Chapter 8), sigma delta modulators (Chapter 9), etc, are found almost everywhere. Understanding nonlinear behaviours as well as control of these circuits and systems are important for real practical engineering applications. Control theories for linear circuits and systems are well developed and almost complete. However, different nonlinear circuits and systems could exhibit very different behaviours. Hence, it is difficult to unify a general control theory for general nonlinear circuits and systems. Up to now, control theories for nonlinear circuits and systems are still very limited. The objective of this book is to review the state of the art chaos control methods for some common nonlinear circuits and systems, such as those listed in the above, and stimulate further research and development in chaos control for nonlinear circuits and systems. This book consists of three parts. The first part of the book consists of reviews on general chaos control methods. In particular, a time-delayed approach written by H. Huang and G. Feng is reviewed in Chapter 1. A master slave synchronization problem for chaotic Lur’e systems is considered. A delay independent and delay dependent synchronization criteria are derived based on the H performance. The design of the time delayed feedback controller can be accomplished by means of the feasibility of linear matrix inequalities. In Chapter 2, a fuzzy model based approach written by H.K. Lam and F.H.F. Leung is reviewed. The synchronization of chaotic systems subject to parameter uncertainties is considered. A chaotic system is first represented by the fuzzy model. A switching controller is then employed to synchronize the systems. The stability conditions in terms of linear matrix inequalities are derived based on the Lyapunov stability theory. The tracking performance and parameter design of the controller are formulated as a generalized eigenvalue minimization problem which is solved numerically via some convex programming techniques. In Chapter 3, a sliding mode control approach written by Y. Feng and X. Yu is reviewed. Three kinds of sliding mode control methods, traditional sliding mode control, terminal sliding mode control and non-singular terminal sliding mode control, are employed for the control of a chaotic system to realize two different control objectives, namely to force the system states to converge to zero or to track desired trajectories. Observer based chaos synchronizations for chaotic systems with single nonlinearity and multi-nonlinearities are also presented. In Chapter 4, an optimal control approach written by C.Z. Wu, C.M. Liu, K.L. Teo and Q.X. Shao is reviewed. Systems with nonparametric regression with jump points are considered. The rough locations of all the possible jump points are identified using existing kernel methods. A smooth spline function is used to approximate each segment of the regression function. A time scaling transformation is derived so as to map the undecided jump points to fixed points. The approximation problem is formulated as an optimization problem and solved via existing optimization tools. The second part of the book consists of reviews on general chaos controls for continuous-time systems. In particular, chaos controls for Chua’s circuits written by L.A.B. Tôrres, L.A. Aguirre, R.M. Palhares and E.M.A.M. Mendes are discussed in Chapter 5. An inductorless Chua’s circuit realization is presented, as well as some practical issues, such as data analysis, mathematical modelling and dynamical characterization, are discussed. The tradeoff among the control objective, the control energy and the model complexity is derived. In Chapter 6, chaos controls for pulse width modulation current mode single phase H-bridge inverters written by B. Robert, M. Feki and H.H.C. Iu are discussed. A time delayed feedback controller is used in conjunction with the proportional controller in its simple form as well as in its extended form to stabilize the desired periodic orbit for larger values of the proportional controller gain. This method is very robust and easy to implement. In Chapter 7, chaos controls for epileptiform bursting in the brain written by M.W. Slutzky, P. Cvitanovic and D.J. Mogul are discussed. Chaos analysis and chaos control algorithms for manipulating the seizure like behaviour in a brain slice model are discussed. The techniques provide a nonlinear control pathway for terminating or potentially preventing epileptic seizures in the whole brain. The third part of the book consists of reviews on general chaos controls for discrete-time systems. In particular, chaos controls for phase lock loops written by A.M. Harb and B.A. Harb are discussed in Chapter 8. A nonlinear controller based on the theory of backstepping is designed so that the phase lock loops will not be out of lock. Also, the phase lock loops will not exhibit Hopf bifurcation and chaotic behaviours. In Chapter 9, chaos controls for sigma delta modulators written by B.W.K. Ling, C.Y.F. Ho and J.D. Reiss are discussed. A fuzzy impulsive control approach is employed for the control of the sigma delta modulators. The local stability criterion and the condition for the occurrence of limit cycle behaviours are derived. Based on the derived conditions, a fuzzy impulsive control law is formulated so that the occurrence of the limit cycle behaviours, the effect of the audio clicks and the distance between the state vectors and an invariant set are minimized supposing that the invariant set is nonempty. The state vectors can be bounded within any arbitrary nonempty region no matter what the input step size, the initial condition and the filter parameters are. The editors are much indebted to the editor of the World Scientific Series on Nonlinear Science, Prof. Leon Chua, and to Senior Editor Miss Lakshmi Narayan for their help and congenial processing of the edition

On low frequency conducted EMI: interference mitigation with focus on the DC switching harmonic in the time and frequency domains

The recent increase of interconnected electrical systems such as power supplies and communication links are creating problems associated with electromagnetic fields generated at different voltage levels and frequencies. Semiconductor switches used in for example Switched Mode Power Supplies are constantly increasing in power rating and frequency limits. In addition, wired communication links are also increasing the working bandwidth and channel capability to transfer more information in less time. Smart grids are receiving much attention from companies and researchers all over the world. Two concerns that drive the research carried out on smart grids are Power Quality and Signal Integrity. This work presents an analysis of conducted emissions with two aims. Firstly, an analysis is made of the simulated and measured data when a DC system generates electromagnetic interference and how to improve or mitigate it with certain frequency modulation techniques by spreading the spectrum of the switching frequency in agreement to an established standard. Secondly, a demonstration of the coupling effects as one of the major concerns when dealing with Electromagnetic Interference sources is presented experimentally. Statistical analyses for these tests are performed to understand the main causes and possible actions to suppress interference and to address Electromagnetic Compatibility between devices. The work presents the following findings. An understanding of the important parameters for frequency modulation techniques called as Spread Spectrum. These parameters are the rate of change for the modulating signal and the modulation index that controls the switching frequency of a modulated DC-DC converter to mitigate the interference measured. The importance of an auxiliary time domain (Bit Error Rate) analysis to measure the interference of a DC-DC converter modulated by Spread Spectrum to understand the main drawback in the emissions measured from a different point of view by means of a Crosstalk environment. The conclusion that Bit Error Rate measurement of a communication signal cannot be decreased using Spread Spectrum Modulation for the power converter as the EMI source. The results obtained use data measured using an EMI receiver and where possible a simulation describing the most important parameters. This work provides interesting and useful points to analyse the Spread Spectrum technique applied to DC power converters and the main advantages and disadvantages