Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data

We have studied the possibility of calibrating airborne laser scanning (ALS) intensity data, using land targets typically available in urban areas. For this purpose, a test area around Espoonlahti Harbor, Espoo, Finland, for which a long time series of ALS campaigns is available, was selected. Different target samples (beach sand, concrete, asphalt, different types of gravel) were collected and measured in the laboratory. Using tarps, which have certain backscattering properties, the natural samples were calibrated and studied, taking into account the atmospheric effect, incidence angle and flying height. Using data from different flights and altitudes, a time series for the natural samples was generated. Studying the stability of the samples, we could obtain information on the most ideal types of natural targets for ALS radiometric calibration. Using the selected natural samples as reference, the ALS points of typical land targets were calibrated again and examined. Results showed the need for more accurate ground reference data, before using natural samples in ALS intensity data calibration. Also, the NIR camera-based field system was used for collecting ground reference data. This system proved to be a good means for collecting in situ reference data, especially for targets with inhomogeneous surface reflection properties

Absolute Radiometric Calibration of ALS Intensity Data: Effects on Accuracy and Target Classification

Radiometric calibration of airborne laser scanning (ALS) intensity data aims at retrieving a value related to the target scattering properties, which is independent on the instrument or flight parameters. The aim of a calibration procedure is also to be able to compare results from different flights and instruments, but practical applications are sparsely available, and the performance of calibration methods for this purpose needs to be further assessed. We have studied the radiometric calibration with data from three separate flights and two different instruments using external calibration targets. We find that the intensity data from different flights and instruments can be compared to each other only after a radiometric calibration process using separate calibration targets carefully selected for each flight. The calibration is also necessary for target classification purposes, such as separating vegetation from sand using intensity data from different flights. The classification results are meaningful only for calibrated intensity data

Comparison of discrete return and waveform terrestrial laser scanning for dense vegetation filtering

Abstract. In this paper we present the results of the comparison between two terrestrial laser scanners (TLS), a discrete return system (Riegl LMS-Z620) and an echo-digitizing system (Riegl VZ-400), employed for the survey of a dense forested area, in the italian Alps. The site is actually undergoing a strong debate among the inhabitants and local government authorities about the exploitation of the area as a huge quarry to produce building material. The dispute originates from the uncertainty about the instability of the underlying mountain slope, which was interested in 1966 by a landslide. The whole area was surveyed with the two laser scanners on February 2011 during the vegetation dormant period. A slight different processing workflow was applied to the collected datasets: the VZ-400 scans were pre-filtered by exploiting the "calibrated relative reflectance" readings and the multi-target capability provided by this laser scanning system. Next, two different spatial filters were applied to both the resulting georeferenced 3D models, in order to eliminate as much vegetation as possible: iterative filter and a custom morphological filter, developed by the authors. Achieved results show that for both datasets, the iterative and the morphological filters perform quite well for eliminating the vegetation, though some manual editing is still required since vegetation does not feature a prevalent growing direction. Furthermore, the comparison between the number of points left in the final DTMs shows that the VZ-400 provided a one order of magnitude denser point cloud wrt. the LMS-Z620. This demonstrates that a TLS with multi-target capability can potentially provide a more detailed DTM even in presence of dense vegetation

Potential of ILRIS3D Intensity Data for Planar Surfaces Segmentation

Intensity value based point cloud segmentation has received less attention because the intensity value of the terrestrial laser scanner is usually altered by receiving optics/hardware or the internal propriety software, which is unavailable to the end user. We offer a solution by assuming the terrestrial laser scanners are stable and the behavior of the intensity value can be characterized. Then, it is possible to use the intensity value for segmentation by observing its behavior, i.e., intensity value variation, pattern and presence of location of intensity values, etc. In this study, experiment results for characterizing the intensity data of planar surfaces collected by ILRIS3D, a terrestrial laser scanner, are reported. Two intensity formats, grey and raw, are employed by ILRIS3D. It is found from the experiment results that the grey intensity has less variation; hence it is preferable for point cloud segmentation. A warm-up time of approximate 1.5 hours is suggested for more stable intensity data. A segmentation method based on the visual cues of the intensity images sequence, which contains consecutive intensity images, is proposed in order to segment the 3D laser points of ILRIS3D. This method is unique to ILRIS3D data and does not require radiometric calibration

A Review of LIDAR Radiometric Processing: From Ad Hoc Intensity Correction to Rigorous Radiometric Calibration

In addition to precise 3D coordinates, most light detection and ranging (LIDAR) systems also record “intensity”, loosely defined as the strength of the backscattered echo for each measured point. To date, LIDAR intensity data have proven beneficial in a wide range of applications because they are related to surface parameters, such as reflectance. While numerous procedures have been introduced in the scientific literature, and even commercial software, to enhance the utility of intensity data through a variety of “normalization”, “correction”, or “calibration” techniques, the current situation is complicated by a lack of standardization, as well as confusing, inconsistent use of terminology. In this paper, we first provide an overview of basic principles of LIDAR intensity measurements and applications utilizing intensity information from terrestrial, airborne topographic, and airborne bathymetric LIDAR. Next, we review effective parameters on intensity measurements, basic theory, and current intensity processing methods. We define terminology adopted from the most commonly-used conventions based on a review of current literature. Finally, we identify topics in need of further research. Ultimately, the presented information helps lay the foundation for future standards and specifications for LIDAR radiometric calibration.Keywords: calibration, normalization, radiometric, correction, intensity, LIDAR, laser scanningThis is the publisher’s final pdf. The published article is copyrighted by the author(s) and published by MDPI. The published article can be found at: http://www.mdpi.com/journal/sensor

Mobile Laser Scanning – System development, performance and applications

Osajulkaisut: Publication 1: Antero Kukko, Sanna Kaasalainen, and Paula Litkey. 2008. Effect of incidence angle on laser scanner intensity and surface data. Applied Optics, volume 47, number 7, pages 986-992. doi:10.1364/AO.47.000986 Publication 2: Antero Kukko and Juha Hyyppä. 2009. Small-footprint laser scanning simulator for system validation, error assessment, and algorithm development. Photogrammetric Engineering and Remote Sensing, volume 75, number 9, pages 1177-1189. Publication 3: Antero Kukko, Constantin-Octavian Andrei, Veli-Matti Salminen, Harri Kaartinen, Yuwei Chen, Petri Rönnholm, Hannu Hyyppä, Juha Hyyppä, Ruizhi Chen, Henrik Haggrén, Iisakki Kosonen, and Karel Čapek. 2007. Road environment mapping system of the Finnish Geodetic Institute - FGI ROAMER -. In: Petri Rönnholm, Hannu Hyyppä, and Juha Hyyppä (editors). Proceedings of the ISPRS Workshop on Laser Scanning 2007 and SilviLaser 2007. Espoo, Finland. 12-14 September 2007. International Society for Photogrammetry and Remote Sensing. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, volume 36, part 3 / W52, pages 241-247. ISSN 1682-1777. Publication 4: Antero Kukko, Harri Kaartinen, Juha Hyyppä, and Yuwei Chen. 2012. Multiplatform mobile laser scanning: Usability and performance. Sensors, volume 12, number 9, pages 11712-11733. doi:10.3390/s120911712 Publication 5: Harri Kaartinen, Juha Hyyppä, Antero Kukko, Anttoni Jaakkola, and Hannu Hyyppä. 2012. Benchmarking the performance of mobile laser scanning systems using a permanent test field. Sensors, volume 12, number 9, pages 12814-12835. doi:10.3390/s120912814 Publication 6: P. Alho, A. Kukko, H. Hyyppä, H. Kaartinen, J. Hyyppä, and A. Jaakkola. 2009. Application of boat-based laser scanning for river survey. Earth Surface Processes and Landforms, volume 34, number 13, pages 1831-1838. doi:10.1002/esp.1879 Publication 7: Matti Vaaja, Juha Hyyppä, Antero Kukko, Harri Kaartinen, Hannu Hyyppä, and Petteri Alho. 2011. Mapping topography changes and elevation accuracies using a mobile laser scanner. Remote Sensing, volume 3, number 3, pages 587-600. doi:10.3390/rs3030587Laser scanning is a surveying technique used for mapping topography, vegetation, urban areas and infrastructure, ice, and other targets of interest. Its application on a terrestrial mobile platform is a promising method for effectively collecting three-dimensional data for complex environments and for producing model information for location-based services necessitating rapidly collected and up-to-date data. Development of mobile laser scanning (MLS) systems for such purposes is presented in this study. Different aspects of this technology were analyzed in laboratory experiments, simulations and field tests, in order to understand their effects on the ranging, intensity and point cloud data, especially in terms of point distribution and accuracy. In order to validate the performance of the developed ROAMER and AKHKA MLS systems, various three-dimensional mapping tasks were performed during an international benchmarking test, as well as in the field in numerous projects. The results showed that the proposed systems can reliably provide accurate data. It has also been shown that the various modalities of the systems allow data acquisition in numerous application scenarios and environments not previously possible. MLS improves the data output compared to terrestrial laser scanning (TLS) and outperforms airborne laser scanning (ALS) in ranging precision and point density. As a result, MLS is well suited to fill the gap between these two previously dominant 3D data acquisition techniques.Laserkeilaus on mittaustekniikka, jota käytetään maaston topografian kasvillisuuden, rakennettujen alueiden, infrastruktuurin, jään ja muiden kohteiden kartoitukseen. Tekniikan soveltaminen liikkuvalle alustalle on lupaava menetelmä monimuotoisten ympäristöjen tehokkaaseen kolmiulotteiseen mittaamiseen ja mallinnustiedon tuottamiseen paikkatietopalveluihin, jotka edellyttävät tiedon nopeaa hankintaa ja ajantasaisuutta. Tässä tutkimuksessa kehitettiin liikkuvia laserkeilausjärjestelmiä (MLS). Eri tekijöiden vaikutuksia etäisyys- ja intensiteettihavaintoihin, pistejakaumaan ja tarkkuuteen selvitettiin laboratoriokokein, simuloimalla ja koetöin. Tutkimuksessa kehitettyjen ROAMER ja AKHKA MLS-järjestelmien suorituskykyä kolmiulotteisen mittaustiedon tuottamiseen erilaisissa kartoitustehtävissä tutkittiin kansainvälisessä vertailututkimuksessa kaupunkitestikentän avulla, mutta lisäksi käytännön sovelluksissa useassa eri projektissa. Tutkimuksen tulokset osoittavat, että kehitetyt MLS järjestelmät tuottavat tarkkaa tietoa luotettavasti. Järjestelmien monikäyttöisyys mahdollistaa aineistonhankinnan eri sovellustapauksissa ja ympäristöissä tavalla, joka ei ole aikaisemmin ollut mahdollista. Liikkuva laserkeilaus parantaa merkittävästi mittauksen tehokkuutta maalaserkeilaukseen verrattuna, ja ylittää lentolaserkeilauksen suorituskyvyn etäisyysmittauksen tarkkuudessa ja pistetiheydessä. Liikkuva laserkeilaus tarjoaakin näitä kahta aikaisemmin vallitsevaa 3D-mittausteknologiaa hyvin täydentävän kartoitusmenetelmän

Terrestrial laser scanning for plot-scale forest measurement

Plot-scale measurements have been the foundation for forest surveys and reporting for over 200 years. Through recent integration with airborne and satellite remote sensing, manual measurements of vegetation structure at the plot scale are now the basis for landscape, continental and international mapping of our forest resources. The use of terrestrial laser scanning (TLS) for plot-scale measurement was first demonstrated over a decade ago, with the intimation that these instruments could replace manual measurement methods. This has not yet been the case, despite the unparalleled structural information that TLS can capture. For TLS to reach its full potential, these instruments cannot be viewed as a logical progression of existing plot-based measurement. TLS must be viewed as a disruptive technology that requires a rethink of vegetation surveys and their application across a wide range of disciplines. We review the development of TLS as a plotscale measurement tool, including the evolution of both instrument hardware and key data processing methodologies. We highlight two broad data modelling approaches of gap probability and geometrical modelling and the basic theory that underpins these. Finally, we discuss the future prospects for increasing the utilisation of TLS for plot-scale forest assessment and forest monitoring

Aspects of Accuracy, Scanning Angle Optimization, and Intensity Calibration Related to Nationwide Laser Scanning

Osajulkaisut: Publication 1: Ahokas, E., Kaartinen, H., Hyyppä, J. 2004. A quality assessment of repeated airborne laser scanner observations. The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, Istanbul, Turkey, Vol. XXXV, part B3, pp. 237-242. ISSN 1682-1750. Publication 2: Ahokas, E., Hyyppä, J., Kaartinen, H., Kukko, A., Kaasalainen, S., Krooks, A. 2010. The effect of biomass and scanning angle on laser beam transmittance. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, Vienna, Austria, Vol. XXXVIII(7A), pp. 1-6. ISSN 1682-1777. http://www.isprs.org/proceedings/XXXVIII/part7/a/pdf/1_XXXVIII-part7A.pdf Publication 3: Ahokas, E., Hyyppä, J., Yu, X., Holopainen, M. 2011. Transmittance of Airborne Laser Scanning Pulses for Boreal Forest Elevation Modeling. Remote Sensing. 3, 1365-1379. ISSN 2072-4292. http://www.mdpi.com/2072-4292/3/7/1365/ Publication 4: Kaasalainen, S., Ahokas, E., Hyyppä, J., Suomalainen, J. 2005. Study of surface brightness from backscattered laser intensity: Calibration of laser data. IEEE Geoscience and remote sensing letters, Vol. 2, No. 3, pp. 255-259, ISSN 1545-598X. Publication 5: Ahokas, E., Kaasalainen, S., Hyyppä, J., Suomalainen, J. 2006. Calibration of the Optech ALTM 3100 laser scanner intensity data using brightness targets. ISPRS Commission I Symposium, Paris Marne-la-Vallee, 4-6 July 2006, ISPRS Volume XXXVI Part 1/A. pp. 14-20. CD-ROM publication. Also in Revue Française de Photogrammétrie et de Télédétection, No. 182, (2006-2), pp. 10-16. Publication 6: Honkavaara, E., Peltoniemi J., Ahokas, E., Kuittinen R., Hyyppä, J., Jaakkola, J., Kaartinen, H., Markelin, L., Nurminen, K., Suomalainen, J. 2008. A Permanent Test Field for Digital Photogrammetric Systems. Photogrammetric Engineering and Remote Sensing. Vol. 74, No. 1, pp. 95-106.Airborne laser scanning is a technique that produces three-dimensional coordinates of the Earth’s surface as well as generating intensity values. Nationwide airborne laser scanning was launched in Finland in 2008 and some 180 000 km2 had been scanned by the end of 2012. While the main goal in this endeavour is to produce an accurate digital elevation/terrain model (2 x 2 m2 grid size) of the whole of the country, other applications, e.g. forestry, will benefit from the data as well. This study deals with the accuracy of airborne laser scanning, the optimization of the scanning angle, and the calibration of intensity. Accuracy assessments of airborne laser scanning have shown that the geometric accuracy of the method can fulfill the accuracy requirements for producing a nationwide digital elevation model with a grid of 2 x 2 m2. When studying the effect of scanning angle and biomass on elevation modeling capability, it was found that it would be possible to increase the scanning angle applied in Finland’s nationwide laser scanning. Even though the accuracy of the elevation model in the conditions prevailing in Finland allows increasing of the scanning angle, other applications would most probably not benefit from this. For example, these same data are sometimes used in nationwide forest inventory in Finland. A method for relative and absolute calibration of airborne laser scanning intensity was developed. The portable reference targets have proved their usefulness for calibration purposes. An intensity correction method should be used in pre-processing the airborne laser data. As a result of this, the usability of the intensity values may increase in practical applications, such as in classification. The studies constituting this dissertation have already impacted on the practical aspects of the nationwide airborne laser scanning dealing with accuracy assessment, the work done in the field of intensity calibration, and scanning angle analysis may have a further impact on nationwide laser scanning in the coming years. The optimization of airborne laser scanning flight parameters for multi-use nationwide laser scanning is a topic deserving further research.Ilmasta tehtävä laserkeilaus tuottaa 3D-koordinaatteja maan pinnalta sekä intensiteettiarvoja. Suomen valtakunnallinen laserkeilaus aloitettiin vuonna 2008 ja noin 180000 km2 oli keilattu vuoden 2012 loppuun mennessä. Vaikka päätarkoituksena on tuottaa tarkka digitaalinen korkeus/maastomalli (2 x 2 m2 ruutukoko) koko maasta, muutkin sovellukset, kuten metsätalous, hyötyvät tästä aineistosta. Tämä tutkimus käsittelee ilmasta tehtävän laserkeilauksen tarkkuutta, keilauskulman optimointia sekä intensiteetin kalibrointia. Laserkeilauksen tarkkuusarviointi on osoittanut, että menetelmän geometrinen tarkkuus täyttää valtakunnallisen digitaalisen korkeusmallin tuottamisen tarkkuusvaatimukset. Kun tutkittiin keilauskulman ja biomassan vaikutusta korkeusmallin tuottamiseen, huomattiin että olisi mahdollista kasvattaa valtakunnallisen laserkeilauksen havaintokulmaa. Vaikka korkeusmallin tarkkuus mahdollistaisi Suomen oloissa keilauskulman kasvattamisen, muut sovellukset eivät luultavasti hyötyisi tästä. Esimerkiksi tätä samaa aineistoa käytetään Suomen valtakunnallisessa metsien inventoinnissa. Laserkeilauksen intensiteetin suhteellista ja absoluuttista kalibrointia varten kehitettiin menetelmä. Siirrettävät referenssikohteet osoittivat käyttökelpoisuutensa intensiteetin kalibroinnissa. Intensiteetin kalibrointimenetelmää tulisi käyttää laserkeilausaineiston esikäsittelyssä. Tämän tuloksena intensiteettiarvojen käyttökelpoisuus kasvaisi käytännön sovelluksissa, kuten luokittelussa. Tämän väitöskirjan muodostaneet tutkimukset ovat jo käytännössä vaikuttaneet valtakunnallisen laserkeilauksen tarkkuusarvioinnissa. Intensiteetin kalibrointityö ja keilauskulman analysointi vaikuttanevat valtakunnalliseen laserkeilaukseen tulevina vuosina. Lisätutkimusta tarvitaan ilmasta tehtävän laserkeilauksen lentoparametrien optimoimiseksi monikäyttöistä valtakunnallista laserkeilausta varten

Earth Resources: A continuing bibliography with indexes, issue 40

This bibliography lists 423 reports, articles, and other documents introduced into the NASA scientific and technical information system between October 1 and December 31, 1983. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economical analysis