42 research outputs found
Advanced optimization algorithms for sensor arrays and multi-antenna communications
Optimization problems arise frequently in sensor array and multi-channel signal processing applications. Often, optimization needs to be performed subject to a matrix constraint. In particular, unitary matrices play a crucial role in communications and sensor array signal processing. They are involved in almost all modern multi-antenna transceiver techniques, as well as sensor array applications in biomedicine, machine learning and vision, astronomy and radars.
In this thesis, algorithms for optimization under unitary matrix constraint stemming from Riemannian geometry are developed. Steepest descent (SD) and conjugate gradient (CG) algorithms operating on the Lie group of unitary matrices are derived. They have the ability to find the optimal solution in a numerically efficient manner and satisfy the constraint accurately. Novel line search methods specially tailored for this type of optimization are also introduced. The proposed approaches exploit the geometrical properties of the constraint space in order to reduce the computational complexity.
Array and multi-channel signal processing techniques are key technologies in wireless communication systems. High capacity and link reliability may be achieved by using multiple transmit and receive antennas. Combining multi-antenna techniques with multicarrier transmission leads to high the spectral efficiency and helps to cope with severe multipath propagation.
The problem of channel equalization in MIMO-OFDM systems is also addressed in this thesis. A blind algorithm that optimizes of a combined criterion in order to be cancel both inter-symbol and co-channel interference is proposed. The algorithm local converge properties are established as well
Time Domain Signal Detection for MIMO OFDM
The MIMO techniques with OFDM is regarded as a promising solution for increasing data rates, for wireless access qualities of future wireless local area networks, fourth generation wireless communication systems, and for high capacity, as well as better performance. Hence as part of continued research, in this paper an attempt is made to carry out modelling, analysis, channel matrix estimation, synchronization and simulation of MIMO-OFDM system. A time domain signal detection algorithm can be based on Second Order Statistics (SOS) proposed for MIMO-OFDM system over frequency selective fading channels. In this algorithm, an equalizer is first inserted to reduce the MIMO channels to ones with channel length shorter than or equal to the Cyclic Prefix (CP) length. A system model in which the ith received OFDM block left shifted by j samples introduced. MIMO OFDM system model which uses the equalizer can be designed using SOS of the received signal vector to cancel the most of the Inter Symbol Interference (ISI). The transmitted signals are then detected from the equalizer output. In the proposed algorithm, only 2P (P transmitted antennas / users in the MIMO-OFDM system) columns of the channel matrix need to be estimated and channel length estimation is unnecessary, which is an advantage over an existing algorithms. In addition, the proposed algorithm is applicable for irrespective of whether the channel length is shorter than, equal to or longer than the CP length. Simulation results verify the effectiveness of the proposed algorithm and shows that it out performs the existing one in all cases
Hybrid solutions to instantaneous MIMO blind separation and decoding: narrowband, QAM and square cases
Future wireless communication systems are desired to support high data rates and high quality transmission when considering the growing multimedia applications. Increasing the channel throughput leads to the multiple input and multiple output and blind equalization techniques in recent years. Thereby blind MIMO equalization has attracted a great interest.Both system performance and computational complexities play important roles in real time communications. Reducing the computational load and providing accurate performances are the main challenges in present systems. In this thesis, a hybrid method which can provide an affordable complexity with good performance for Blind Equalization in large constellation MIMO systems is proposed first. Saving computational cost happens both in the signal sep- aration part and in signal detection part. First, based on Quadrature amplitude modulation signal characteristics, an efficient and simple nonlinear function for the Independent Compo- nent Analysis is introduced. Second, using the idea of the sphere decoding, we choose the soft information of channels in a sphere, and overcome the so- called curse of dimensionality of the Expectation Maximization (EM) algorithm and enhance the final results simultaneously. Mathematically, we demonstrate in the digital communication cases, the EM algorithm shows Newton -like convergence.Despite the widespread use of forward -error coding (FEC), most multiple input multiple output (MIMO) blind channel estimation techniques ignore its presence, and instead make the sim- plifying assumption that the transmitted symbols are uncoded. However, FEC induces code structure in the transmitted sequence that can be exploited to improve blind MIMO channel estimates. In final part of this work, we exploit the iterative channel estimation and decoding performance for blind MIMO equalization. Experiments show the improvements achievable by exploiting the existence of coding structures and that it can access the performance of a BCJR equalizer with perfect channel information in a reasonable SNR range. All results are confirmed experimentally for the example of blind equalization in block fading MIMO systems
Multiuser MIMO-OFDM for Next-Generation Wireless Systems
This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station’s or radio port’s coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems
Widely Linear vs. Conventional Subspace-Based Estimation of SIMO Flat-Fading Channels: Mean-Squared Error Analysis
We analyze the mean-squared error (MSE) performance of widely linear (WL) and
conventional subspace-based channel estimation for single-input multiple-output
(SIMO) flat-fading channels employing binary phase-shift-keying (BPSK)
modulation when the covariance matrix is estimated using a finite number of
samples. The conventional estimator suffers from a phase ambiguity that reduces
to a sign ambiguity for the WL estimator. We derive closed-form expressions for
the MSE of the two estimators under four different ambiguity resolution
scenarios. The first scenario is optimal resolution, which minimizes the
Euclidean distance between the channel estimate and the actual channel. The
second scenario assumes that a randomly chosen coefficient of the actual
channel is known and the third assumes that the one with the largest magnitude
is known. The fourth scenario is the more realistic case where pilot symbols
are used to resolve the ambiguities. Our work demonstrates that there is a
strong relationship between the accuracy of ambiguity resolution and the
relative performance of WL and conventional subspace-based estimators, and
shows that the less information available about the actual channel for
ambiguity resolution, or the lower the accuracy of this information, the higher
the performance gap in favor of the WL estimator.Comment: 20 pages, 7 figure
Advanced receiver structures for mobile MIMO multicarrier communication systems
Beyond third generation (3G) and fourth generation (4G) wireless communication systems are targeting far higher data rates, spectral efficiency and mobility requirements than existing 3G networks. By using multiple antennas at the transmitter and the receiver, multiple-input multiple-output (MIMO) technology allows improving both the spectral efficiency (bits/s/Hz), the coverage, and link reliability of the system. Multicarrier modulation such as orthogonal frequency division multiplexing (OFDM) is a powerful technique to handle impairments specific to the wireless radio channel. The combination of multicarrier modulation together with MIMO signaling provides a feasible physical layer technology for future beyond 3G and fourth generation communication systems.
The theoretical benefits of MIMO and multicarrier modulation may not be fully achieved because the wireless transmission channels are time and frequency selective. Also, high data rates call for a large bandwidth and high carrier frequencies. As a result, an important Doppler spread is likely to be experienced, leading to variations of the channel over very short period of time. At the same time, transceiver front-end imperfections, mobility and rich scattering environments cause frequency synchronization errors. Unlike their single-carrier counterparts, multi-carrier transmissions are extremely sensitive to carrier frequency offsets (CFO). Therefore, reliable channel estimation and frequency synchronization are necessary to obtain the benefits of MIMO OFDM in mobile systems. These two topics are the main research problems in this thesis.
An algorithm for the joint estimation and tracking of channel and CFO parameters in MIMO OFDM is developed in this thesis. A specific state-space model is introduced for MIMO OFDM systems impaired by multiple carrier frequency offsets under time-frequency selective fading. In MIMO systems, multiple frequency offsets are justified by mobility, rich scattering environment and large angle spread, as well as potentially separate radio frequency - intermediate frequency chains. An extended Kalman filter stage tracks channel and CFO parameters. Tracking takes place in time domain, which ensures reduced computational complexity, robustness to estimation errors as well as low estimation variance in comparison to frequency domain processing.
The thesis also addresses the problem of blind carrier frequency synchronization in OFDM. Blind techniques exploit statistical or structural properties of the OFDM modulation. Two novel approaches are proposed for blind fine CFO estimation. The first one aims at restoring the orthogonality of the OFDM transmission by exploiting the properties of the received signal covariance matrix. The second approach is a subspace algorithm exploiting the correlation of the channel frequency response among the subcarriers. Both methods achieve reliable estimation of the CFO regardless of multipath fading. The subspace algorithm needs extremely small sample support, which is a key feature in the face of time-selective channels. Finally, the Cramér-Rao (CRB) bound is established for the problem in order to assess the large sample performance of the proposed algorithms.reviewe
FGPA Implementation of Low-Complexity ICA Based Blind Multiple-Input-Multiple-Output OFDM Receivers
In this thesis Independent Component Analysis (ICA) based methods are used for blind detection in MIMO systems. ICA relies on higher order statistics (HOS) to recover the transmitted streams from the received mixture. Blind separation of the mixture is achieved based on the assumption of mutual statistical independence of the source streams. The use of HOS makes ICA methods less sensitive to Gaussian noise. ICA increase the spectral efficiency compared to conventional systems, without any training/pilot data required. ICA is usually used for blind source separation (BSS) from their mixtures by measuring non-Gaussianity using Kurtosis. Many scientific problems require FP arithmetic with high precision in their calculations. Moreover a large dynamic range of numbers is necessary for signal processing. FP arithmetic has the ability to automatically scale numbers and allows numbers to be represented in a wider range than fixed-point arithmetic. Nevertheless, FP algorithm is difficult to implement on the FPGA, because the algorithm is so complex that the area (logic elements) of FPGA leads to excessive consumption when implemented. A simplified 32-bit FP implementation includes adder, Subtractor, multiplier, divider, and square rooter The FPGA design is based on a hierarchical concept, and the experimental results of the design are presented
Linear Transmit-Receive Strategies for Multi-user MIMO Wireless Communications
Die Notwendigkeit zur Unterdrueckung von Interferenzen auf der einen Seite
und zur Ausnutzung der durch Mehrfachzugriffsverfahren erzielbaren Gewinne
auf der anderen Seite rueckte die raeumlichen Mehrfachzugriffsverfahren
(Space Division Multiple Access, SDMA) in den Fokus der Forschung. Ein
Vertreter der raeumlichen Mehrfachzugriffsverfahren, die lineare
Vorkodierung, fand aufgrund steigender Anzahl an Nutzern und Antennen in
heutigen und zukuenftigen Mobilkommunikationssystemen besondere Beachtung,
da diese Verfahren das Design von Algorithmen zur Vorcodierung
vereinfachen. Aus diesem Grund leistet diese Dissertation einen Beitrag zur
Entwicklung linearer Sende- und Empfangstechniken fuer MIMO-Technologie mit
mehreren Nutzern. Zunaechst stellen wir ein Framework zur Approximation des
Datendurchsatzes in Broadcast-MIMO-Kanaelen mit mehreren Nutzern vor. In
diesem Framework nehmen wir das lineare Vorkodierverfahren regularisierte
Blockdiagonalisierung (RBD) an. Durch den Vergleich von Dirty Paper Coding
(DPC) und linearen Vorkodieralgorithmen (z.B. Zero Forcing (ZF) und
Blockdiagonalisierung (BD)) ist es uns moeglich, untere und obere Schranken
fuer den Unterschied bezueglich Datenraten und bezueglich Leistung zwischen
beiden anzugeben. Im Weiteren entwickeln wir einen Algorithmus fuer
koordiniertes Beamforming (Coordinated Beamforming, CBF), dessen Loesung
sich in geschlossener Form angeben laesst. Dieser CBF-Algorithmus basiert
auf der SeDJoCo-Transformation und loest bisher vorhandene Probleme im
Bereich CBF. Im Anschluss schlagen wir einen iterativen CBF-Algorithmus
namens FlexCoBF (flexible coordinated beamforming) fuer
MIMO-Broadcast-Kanaele mit mehreren Nutzern vor. Im Vergleich mit bis dato
existierenden iterativen CBF-Algorithmen kann als vielversprechendster
Vorteil die freie Wahl der linearen Sende- und Empfangsstrategie
herausgestellt werden. Das heisst, jede existierende Methode der linearen
Vorkodierung kann als Sendestrategie genutzt werden, waehrend die Strategie
zum Empfangsbeamforming frei aus MRC oder MMSE gewaehlt werden darf. Im
Hinblick auf Szenarien, in denen Mobilfunkzellen in Clustern
zusammengefasst sind, erweitern wir FlexCoBF noch weiter. Hier wurde das
Konzept der koordinierten Mehrpunktverbindung (Coordinated Multipoint
(CoMP) transmission) integriert. Zuletzt stellen wir drei Moeglichkeiten
vor, Kanalzustandsinformationen (Channel State Information, CSI) unter
verschiedenen Kanalumstaenden zu erlangen. Die Qualitaet der
Kanalzustandsinformationen hat einen starken Einfluss auf die Guete des
Uebertragungssystems. Die durch unsere neuen Algorithmen erzielten
Verbesserungen haben wir mittels numerischer Simulationen von Summenraten
und Bitfehlerraten belegt.In order to combat interference and exploit large multiplexing gains of the
multi-antenna systems, a particular interest in spatial division multiple
access (SDMA) techniques has emerged. Linear precoding techniques, as one
of the SDMA strategies, have obtained more attention due to the fact that
an increasing number of users and antennas involved into the existing and
future mobile communication systems requires a simplification of the
precoding design. Therefore, this thesis contributes to the design of
linear transmit and receive strategies for multi-user MIMO broadcast
channels in a single cell and clustered multiple cells. First, we present a
throughput approximation framework for multi-user MIMO broadcast channels
employing regularized block diagonalization (RBD) linear precoding.
Comparing dirty paper coding (DPC) and linear precoding algorithms (e.g.,
zero forcing (ZF) and block diagonalization (BD)), we further quantify
lower and upper bounds of the rate and power offset between them as a
function of the system parameters such as the number of users and antennas.
Next, we develop a novel closed-form coordinated beamforming (CBF)
algorithm (i.e., SeDJoCo based closed-form CBF) to solve the existing open
problem of CBF. Our new algorithm can support a MIMO system with an
arbitrary number of users and transmit antennas. Moreover, the application
of our new algorithm is not only for CBF, but also for blind source
separation (BSS), since the same mathematical model has been used in BSS
application.Then, we further propose a new iterative CBF algorithm (i.e.,
flexible coordinated beamforming (FlexCoBF)) for multi-user MIMO broadcast
channels. Compared to the existing iterative CBF algorithms, the most
promising advantage of our new algorithm is that it provides freedom in the
choice of the linear transmit and receive beamforming strategies, i.e., any
existing linear precoding method can be chosen as the transmit strategy and
the receive beamforming strategy can be flexibly chosen from MRC or MMSE
receivers. Considering clustered multiple cell scenarios, we extend the
FlexCoBF algorithm further and introduce the concept of the coordinated
multipoint (CoMP) transmission. Finally, we present three strategies for
channel state information (CSI) acquisition regarding various channel
conditions and channel estimation strategies. The CSI knowledge is required
at the base station in order to implement SDMA techniques. The quality of
the obtained CSI heavily affects the system performance. The performance
enhancement achieved by our new strategies has been demonstrated by
numerical simulation results in terms of the system sum rate and the bit
error rate