557 research outputs found
Off-road mobile robot control: An adaptive approach for accuracy and integrity
International audienceThis paper proposes an algorithm dedicated to the control of off-road mobile robots at high speed. Based on adaptive and predictive principles, it first proposes a control law to preserve a high level of accuracy in the path tracking problem. Next, the dynamic model used for grip condition estimation is considered to address also robot integrity preservation thanks to the velocity limitation
Feasible, Robust and Reliable Automation and Control for Autonomous Systems
The Special Issue book focuses on highlighting current research and developments in the automation and control field for autonomous systems as well as showcasing state-of-the-art control strategy approaches for autonomous platforms. The book is co-edited by distinguished international control system experts currently based in Sweden, the United States of America, and the United Kingdom, with contributions from reputable researchers from China, Austria, France, the United States of America, Poland, and Hungary, among many others. The editors believe the ten articles published within this Special Issue will be highly appealing to control-systems-related researchers in applications typified in the fields of ground, aerial, maritime vehicles, and robotics as well as industrial audiences
Integrating Vehicle Slip and Yaw in Overarching Multi-Tiered Automated Vehicle Steering Control to Balance Path Following Accuracy, Gracefulness, and Safety
Balancing path following accuracy and error convergence with graceful motion
in steering control is challenging due to the competing nature of these
requirements, especially across a range of operating speeds and conditions.
This paper demonstrates that an integrated multi-tiered steering controller
considering the impact of slip on kinematic control, dynamic control, and
steering actuator rate commands achieves accurate and graceful path following.
This work is founded on multi-tiered sideslip and yaw-based models, which allow
derivation of controllers considering error due to sideslip and the mapping
between steering commands and graceful lateral motion. Observer based sideslip
estimates are combined with heading error in the kinematic controller to
provide feedforward slip compensation. Path following error is compensated by a
continuous Variable Structure Controller (VSC) using speed-based path manifolds
to balance graceful motion and error convergence. Resulting yaw rate commands
are used by a backstepping dynamic controller to generate steering rate
commands. A High Gain Observer (HGO) estimates sideslip and yaw rate for output
feedback control. Stability analysis of the output feedback controller is
provided, and peaking is resolved. The work focuses on lateral control alone so
that the steering controller can be combined with other speed controllers.
Field results provide comparisons to related approaches demonstrating
gracefulness and accuracy in different complex scenarios with varied weather
conditions and perturbations
Spatial and Temporal Considerations in Vehicle Path Tracking With an Emphasis on Spatial Robustness
This dissertation researches the task and path management of an autonomous vehicle with Ackerman-type steering.
The task management problem was approached as a path training operation in which a human operator drives the desired path through an environment. A training trajectory is converted into a series of path segments that are driveable by the autonomous vehicle by first fitting a general path to the dataset. Next, transition segments are added to the general path to match the vehicle velocity and steering angle rate limit.
The path management problem has been approached by first deriving a kine- matic model of the vehicle. The time domain model is expressed in the frequency domain and then converted into a spatial frequency domain. Next, a stability crite- rion is derived and used in the synthesis of a spatially-robust path controller
Advanced Mobile Robotics: Volume 3
Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective
Design and validation of decision and control systems in automated driving
xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehÃculos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logÃstica de mercancÃas y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologÃas de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehÃculo y la estimación de parámetros. Además, las tecnologÃas en el vehÃculo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologÃas de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehÃculos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo
Integrated Stability and Tracking Control System for Autonomous Vehicle-Trailer Systems
The addition of a trailer to a vehicle significantly changes the dynamics of a single-vehicle and generates new instability modes including jackknifing and snaking. Understanding of the dynamics of these modes leads to the development of more effective control strategies for improved stability and handling. In addition, vehicle-trailer systems suffer from the off-tracking problem meaning that the path of the trailer rear end differs from that of the vehicle front end. Off-tracking makes these vehicles less maneuverable and increases swept path of the vehicle, especially in urban areas and tight spaces.
Vehicle active safety systems have been extensively developed over the past decades to improve vehicle handling and assist the driver to keep the vehicle under control in unfavorable driving situations. Such active safety systems, however, are not well developed for vehicle-trailer systems specialty to control the above-mentioned instability modes. In addition to the above active safety systems, off-tracking of vehicle-trailers is another aspect that is essential in path planning and path tracking of autonomous vehicle-trailers.
In this thesis, first, phase portraits are used to study the non-linear dynamics of the system through state trajectories and equilibrium point locations of a vehicle-trailer system, with respect to the inputs and also the loading conditions of the trailer. By the study of the phase portraits, the foundation of the vehicle-trailer yaw instability is recognized and a two-dimensional stable region as the stability envelope is defined. This stability envelope is utilized to prevent unnecessary control interventions while the vehicle is operating in the safe stability region whereas the controller is allowed to effectively interfere when the vehicle crosses the stability envelope.
To handle multiple control actions in the vehicle and trailer units, a control structure with two hierarchical layers is proposed. In the upper layer, a model predictive controller is formulated as a quadratic optimization problem with a virtual control action for each degree of freedom of the vehicle dynamic model. In this formulation, the developed stability envelope is constructed as state constraints along with control action constraints. In the lower layer, a control allocation approach optimally transforms the virtual control actions provided by the upper layer into steering and/or braking commands for each wheel. In this approach, actuator failure in addition to actuator and tire capacity constraints is taken into account in real-time.
A hybrid A*-based motion planning is developed to generate a trajectory while considering the trailer effect in terms of stability in high speed and off-tracking in high curvature paths. The proposed motion planning utilizes a hybrid A* algorithm combined with potential fields to find a feasible and collision-free trajectory for the vehicle-trailer system.
To assess the performance of the proposed control structure in instability prevention both in snaking and jackknifing, different simulations are conducted using different control actions. Additionally, the fault tolerance and robustness of the proposed controller are investigated. To validate the real-time performance of the proposed control strategy, experimental tests are performed on a vehicle-trailer system with differential braking capability. The results show that the proposed control strategy is able to effectively prevent both instability modes as well as unnecessary engagement of the control action to reduce control intervention. The performance of the developed motion planning module is also evaluated for normal driving, obstacle avoidance, off-tracking compensation, and crash mitigation using high-fidility Carsim model. It is observed that proposed motion planning is able to effectively satisfy all the expected requirements
Recommended from our members
Model Identification and Control of Autonomous Ground Vehicles
Autonomous Ground Vehicles (AGV) are mobile robotic platforms used in variety of applications to execute tasks which could be dangerous for humans to operate. Recently, autonomous cars are discussed in carrying passengers from point to point without human interaction. Sophisticated controllers are required to operate autonomous vehicles while responding to both normal and hazardous driving conditions. Dangerous conditions which might be easily perceivable by sensors in the system require controllers that can readily benefit from the new sensory information. In this thesis, we address this problem by asserting that the design of controllers and corresponding calibration and local planning methods are required to quickly adapt to changes in both the dynamic model of vehicle as well as changes in environment. A full pipeline of calibration, local planner and model predictive controller has been developed and tested in simulation and on physical platform. Properties of a high fidelity model and a simpler model has been studied and their pros and cons has been discussed. Also, a calibration algorithm has been developed to calibrate parameters of dynamic models based on informativeness of robot's motion. Next, A local planning algorithms has been developed to plan vehicle's reference path between consecutive waypoints and finally a model predictive controller has been designed to stabilizes the vehicle to the reference path. A theoretical proof for stability of proposed controller is given. One of the goals behind this work has been design of an adaptive method in a sense that system can quickly adapt to changes in robot's model or environment
Optimal planning and control for hazard avoidance of front-wheel steered ground vehicles
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 124-128).Hazard avoidance is an important capability for safe operation of robotic vehicles at high speed. It is also an important consideration for passenger vehicle safety, as thousands are killed each year in passenger vehicle accidents caused by driver error. Even when hazard locations are known, high-speed hazard avoidance presents challenges in real-time motion planning and control of nonlinear and potentially unstable vehicle dynamics. This thesis presents methods for planning and control of optimal hazard avoidance maneuvers for a bicycle model with front-wheel steering and wheel slip. The planning problem is posed as an optimization problem in which constrained dynamic quantities, such as friction circle utilization, are minimized, while ensuring a minimum clearance from hazards. These optimal trajectories can be computed numerically, though real-time computation requires simple models and constraints. To simplify the computation of optimal avoidance trajectories, analytical solutions to the optimal planning problem are presented for a point mass subject to an acceleration magnitude constraint, which is analogous to a tire friction circle constraint. The optimal point mass solutions are extended to a nonlinear bicycle model by defining a flatness-based trajectory tracking controller using tire force control. This controller decouples the bicycle dynamics into a point mass at the front center of oscillation with an additional degree of freedom related to the vehicle yaw dynamics. Structure is identified in the yaw dynamics and is exploited to characterize stability limits. Simulation results verify the stability properties of the yaw dynamics. These results were applied to a semi-autonomous driver assistance system and demonstrated experimentally on a full-sized passenger vehicle. Efficient computation of point mass avoidance maneuvers was used as a cost-to-go for real-time numerical optimization of trajectories for a bicycle model. The experimental system switches control authority between the driver and an automatic avoidance controller so that the driver retains control authority in benign situations, and the automatic controller avoids hazards automatically in hazardous situations.by Steven C. Peters.Ph.D
Design and Development of an Automatic Steering System for Agricultural Towed Implements
While an auto steered tractor can improve the overall accuracy and efficiency of an operation, for operations that involve towing an implement, a significant portion of the efficiency reduction comes from uncontrolled motions of the towed implement. Therefore, there is a crucial need to study auto steering system for towed implement as well. In this study different requirements of an auto steering system for a towed implement were developed and studied. In this study the guiding performance of two local positioning sensors (Tactile and Ultrasonic sensors) under similar conditions were studied for reading different trajectories at different traveling speed. Furthermore, a fuzzy logic control algorithm was developed to continually generate correction steering signals and keep the tractor and towed implement within a certain boundary of the reference trajectory. Finally, the designed controller was implemented in a hardware-in-loop (HIL) system to analyze the performance of the controller in real world conditions.
The result of this study showed that although the local guidance sensors could locate the tractor or towed implement positions with respect to plant rows accurately, limitations to the performance of sensors were also observed in certain conditions. Sensors were prone to various noises and digital filters were required to apply to collected data. Data analysis showed that at lower speeds (less than 1.79 m/s) the accuracy of sensors was ?2 cm or better. The fuzzy logic controller improved the trajectory tracking accuracy at slow speeds (1-5 m/s) for following non-complex trajectories while no major improvements were achieved for complex trajectories at these speeds. Therefore, the controller had an acceptable accuracy following straight trajectory with negligible deviations at slow speeds. Moreover, experimental results showed that the hydraulic cylinder followed the controller signals with sufficient accuracy. During the experiment the angular displacements remained in the range of ?10? and never hit the constraint of maximum achievable angle, which was ?30?. The satisfactory results showed that the designed automatic steering control system has a good tracking performance with a fast response, thus meeting the navigation control requirement of agricultural equipment to a certain extent
- …