A Computational/Experimental Platform for Investigating Three- Dimensional Puzzle Solving of Comminuted Articular Fractures

Reconstructing highly comminuted articular fractures poses a difficult surgical challenge, akin to solving a complicated three-dimensional (3D) puzzle. Pre-operative planning using CT is critically important, given the desirability of less invasive surgical approaches. The goal of this work is to advance 3D puzzle solving methods toward use as a pre-operative tool for reconstructing these complex fractures. Methodology for generating typical fragmentation/dispersal patterns was developed. Five identical replicas of human distal tibia anatomy, were machined from blocks of high-density polyetherurethane foam (bone fragmentation surrogate), and were fractured using an instrumented drop tower. Pre- and post-fracture geometries were obtained using laser scans and CT. A semi-automatic virtual reconstruction computer program aligned fragment native (nonfracture) surfaces to a pre-fracture template. The tibias were precisely reconstructed with alignment accuracies ranging from 0.03-0.4mm. This novel technology has potential to significantly enhance surgical techniques for reconstructing comminuted intra-articular fractures, as illustrated for a representative clinical case

Advances in identifying osseous fractured areas and virtually reducing bone fractures

[ES]Esta tesis pretende el desarrollo de técnicas asistidas por ordenador para ayudar a los especialistas durante la planificación preoperatoria de una reducción de fractura ósea. Como resultado, puede reducirse el tiempo de intervención y pueden evitarse errores de interpretación, con los consecuentes beneficios en el tratamiento y en el tiempo de recuperación del paciente. La planificación asistida por ordenador de una reducción de fractura ósea puede dividirse en tres grandes etapas: identificación de fragmentos óseos a partir de imágenes médicas, cálculo de la reducción y posterior estabilización de la fractura, y evaluación de los resultados obtenidos. La etapa de identificación puede incluir también la generación de modelos 3D de fragmentos óseos. Esta tesis aborda la identificación de fragmentos óseos a partir de imágenes médicas generadas por TC, la generación de modelos 3D de fragmentos, y el cálculo de la reducción de fracturas, sin incluir el uso de elementos de fijación.[EN]The aim of this work is the development of computer-assisted techniques for helping specialists in the pre-operative planning of bone fracture reduction. As a result, intervention time may be reduced and potential misinterpretations circumvented, with the consequent benefits in the treatment and recovery time of the patient. The computer-assisted planning of a bone fracture reduction may be divided into three main stages: identification of bone fragments from medical images, computation of the reduction and subsequent stabilization of the fracture, and evaluation of the obtained results. The identification stage may include the generation of 3D models of bone fragments, with the purpose of obtaining useful models for the two subsequent stages. This thesis deals with the identification of bone fragments from CT scans, the generation of 3D models of bone fragments, and the computation of the fracture reduction excluding the use of fixation devices.Tesis Univ. Jaén. Departamento de Informática. Leída 19 de septiembre de 201

Book of Abstracts 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization

In this edition, the two events will run together as a single conference, highlighting the strong connection with the Taylor & Francis journals: Computer Methods in Biomechanics and Biomedical Engineering (John Middleton and Christopher Jacobs, Eds.) and Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization (JoãoManuel R.S. Tavares, Ed.). The conference has become a major international meeting on computational biomechanics, imaging andvisualization. In this edition, the main program includes 212 presentations. In addition, sixteen renowned researchers will give plenary keynotes, addressing current challenges in computational biomechanics and biomedical imaging. In Lisbon, for the first time, a session dedicated to award the winner of the Best Paper in CMBBE Journal will take place. We believe that CMBBE2018 will have a strong impact on the development of computational biomechanics and biomedical imaging and visualization, identifying emerging areas of research and promoting the collaboration and networking between participants. This impact is evidenced through the well-known research groups, commercial companies and scientific organizations, who continue to support and sponsor the CMBBE meeting series. In fact, the conference is enriched with five workshops on specific scientific topics and commercial software.info:eu-repo/semantics/draf

Automated Fragmentary Bone Matching

Identification, reconstruction and matching of fragmentary bones are basic tasks required to accomplish quantification and analysis of fragmentary human remains derived from forensic contexts. Appropriate techniques for three-dimensional surface matching have received great attention in computer vision literature, and various methods have been proposed for matching fragmentary meshes; however, many of these methods lack automation, speed and/or suffer from high sensitivity to noise. In addition, reconstruction of fragementary bones along with identification in the presence of reference model to compare with in an automatic scheme have not been addressed. In order to address these issues, we used a multi-stage technique for fragment identification, matching and registration. The study introduces an automated technique for matching of fragmentary human skeletal remains for improving forensic anthropology practice and policy. The proposed technique involves creation of surfaces models for the fragmentary elements which can be done using computerized tomographic scans followed by segmentation. Upon creation of the fragmentary elements models, the models go through feature extraction technique where the surface roughness map of each model is measured using local shape analysis measures. Adaptive thesholding is then used to extract model features. A multi-stage technique is then used to identify, match and register bone fragments to their corresponding template bone model. First, extracted features are used for matching with different template bone models using iterative closest point algorithm with different positions and orientations. The best match score, in terms of minimum root-mean-square error, is used along with the position and orientation and the resulting transformation to register the fragment bone model with the corresponding template bone model using iterative closest point algorithm

Robotic-assisted internal fixation of hip fractures: a fluoroscopy-based intraoperative registration technique

The internal fixation of proximal femoral (hip) fractures is the most frequently performed orthopaedic surgery procedure. When using a sliding compression hip screw, a commonly used fixation device, accurate positioning of the device within the femoral neck-head is achieved by initially drilling a pilot hole. A cannulated component of the hip screw is then inserted over the guide wire (surgical drill bit), which is used to drill the pilot hole. However, in practice, this fluoroscopically controlled drilling process is severely complicated by a depth perception problem and, as such, a surgeon can require several attempts to achieve a satisfactory guide wire placement. A prototype robotic-assisted orthopaedic surgery system has therefore been developed, with a view to achieving accurate right-first-time guide wire insertions. This paper describes the non-invasive digital X-ray photogrammetry-based registration technique which supports the proposed robotic-assisted drilling scenario. Results from preliminary laboratory (in vitro) trials employing this registration technique indicate that the cumulative error associated with the entire X-ray guided robotic system is within acceptable limits for the guide wire insertion process

In silico methods to evaluate Fracture Risk and Bone Mineral Density changes in patients undergoing Total Hip Replacement

La sostituzione totale d’anca è uno degli interventi chirurgici con le più alte percentuali di successo. Esistono due varianti di protesi d’anca che differiscono in base al metodo di ancoraggio all’osso: cementate (fissaggio tramite cemento osseo) e non cementate (fissaggio tramite forzamento). Ad oggi, i chirurghi non hanno indicazioni quantitative di supporto per la scelta fra le due tipologie di impianto, decidendo solo in base alla loro esperienza. Due delle problematiche che interessano le protesi non cementate sono la possibilità di frattura intra-operatoria durante l’inserimento forzato e il riassorbimento osseo nel periodo di tempo successivo all’intervento. A partire da rilevazioni densitometriche effettuate su immagini da TC di pazienti sottoposti a protesi d’anca non cementata, sono stati sviluppati due metodi: 1) per la valutazione del rischio di frattura intra-operatorio tramite analisi agli elementi finiti; 2) per la valutazione della variazione di densità minerale ossea (tridimensionalmente attorno alla protesi) dopo un anno dall’operazione. Un campione di 5 pazienti è stato selezionato per testare le procedure. Ciascuno dei pazienti è stato scansionato tramite TC in tre momenti differenti: una acquisita prima dell’operazione (pre-op), le altre due acquisite 24 ore (post 24h) e 1 anno dopo l’operazione (post 1y). I risultati ottenuti hanno confermato la fattibilità di entrambi i metodi, riuscendo inoltre a distinguere e a quantificare delle differenze fra i vari pazienti. La fattibilità di entrambe le metodologie suggerisce la loro possibilità di impiego in ambito clinico: 1) conoscere la stima del rischio di frattura intra-operatorio può servire come strumento di guida per il chirurgo nella scelta dell’impianto protesico ottimale; 2) conoscere la variazione di densità minerale ossea dopo un anno dall’operazione può essere utilizzato come strumento di monitoraggio post-operatorio del paziente

Segmentation and Fracture Detection in CT Images for Traumatic Pelvic Injuries

In recent decades, more types and quantities of medical data have been collected due to advanced technology. A large number of significant and critical information is contained in these medical data. High efficient and automated computational methods are urgently needed to process and analyze all available medical data in order to provide the physicians with recommendations and predictions on diagnostic decisions and treatment planning. Traumatic pelvic injury is a severe yet common injury in the United States, often caused by motor vehicle accidents or fall. Information contained in the pelvic Computed Tomography (CT) images is very important for assessing the severity and prognosis of traumatic pelvic injuries. Each pelvic CT scan includes a large number of slices. Meanwhile, each slice contains a large quantity of data that may not be thoroughly and accurately analyzed via simple visual inspection with the desired accuracy and speed. Hence, a computer-assisted pelvic trauma decision-making system is needed to assist physicians in making accurate diagnostic decisions and determining treatment planning in a short period of time. Pelvic bone segmentation is a vital step in analyzing pelvic CT images and assisting physicians with diagnostic decisions in traumatic pelvic injuries. In this study, a new hierarchical segmentation algorithm is proposed to automatically extract multiplelevel bone structures using a combination of anatomical knowledge and computational techniques. First, morphological operations, image enhancement, and edge detection are performed for preliminary bone segmentation. The proposed algorithm then uses a template-based best shape matching method that provides an entirely automated segmentation process. This is followed by the proposed Registered Active Shape Model (RASM) algorithm that extracts pelvic bone tissues using more robust training models than the Standard ASM algorithm. In addition, a novel hierarchical initialization process for RASM is proposed in order to address the shortcoming of the Standard ASM, i.e. high sensitivity to initialization. Two suitable measures are defined to evaluate the segmentation results: Mean Distance and Mis-segmented Area to quantify the segmentation accuracy. Successful segmentation results indicate effectiveness and robustness of the proposed algorithm. Comparison of segmentation performance is also conducted using both the proposed method and the Snake method. A cross-validation process is designed to demonstrate the effectiveness of the training models. 3D pelvic bone models are built after pelvic bone structures are segmented from consecutive 2D CT slices. Automatic and accurate detection of the fractures from segmented bones in traumatic pelvic injuries can help physicians detect the severity of injuries in patients. The extraction of fracture features (such as presence and location of fractures) as well as fracture displacement measurement, are vital for assisting physicians in making faster and more accurate decisions. In this project, after bone segmentation, fracture detection is performed using a hierarchical algorithm based on wavelet transformation, adaptive windowing, boundary tracing and masking. Also, a quantitative measure of fracture severity based on pelvic CT scans is defined and explored. The results are promising, demonstrating that the proposed method not only capable of automatically detecting both major and minor fractures, but also has potentials to be used for clinical applications

Probabilistic and geometric shape based segmentation methods.

Image segmentation is one of the most important problems in image processing, object recognition, computer vision, medical imaging, etc. In general, the objective of the segmentation is to partition the image into the meaningful areas using the existing (low level) information in the image and prior (high level) information which can be obtained using a number of features of an object. As stated in [1,2], the human vision system aims to extract and use as much information as possible in the image including but not limited to the intensity, possible motion of the object (in sequential images), spatial relations (interaction) as the existing information, and the shape of the object which is learnt from the experience as the prior information. The main objective of this dissertation is to couple the prior information with the existing information since the machine vision system cannot predict the prior information unless it is given. To label the image into meaningful areas, the chosen information is modelled to fit progressively in each of the regions by an optimization process. The intensity and spatial interaction (as the existing information) and shape (as the prior information) are modeled to obtain the optimum segmentation in this study. The intensity information is modelled using the Gaussian distribution. Spatial interaction that describes the relation between neighboring pixels/voxels is modelled by assuming that the pixel intensity depends on the intensities of the neighboring pixels. The shape model is obtained using occurrences of histogram of training shape pixels or voxels. The main objective is to capture the shape variation of the object of interest. Each pixel in the image will have three probabilities to be an object and a background class based on the intensity, spatial interaction, and shape models. These probabilistic values will guide the energy (cost) functionals in the optimization process. This dissertation proposes segmentation frameworks which has the following properties: i) original to solve some of the existing problems, ii) robust under various segmentation challenges, and iii) fast enough to be used in the real applications. In this dissertation, the models are integrated into different methods to obtain the optimum segmentation: 1) variational (can be considered as the spatially continuous), and 2) statistical (can be considered as the spatially discrete) methods. The proposed segmentation frameworks start with obtaining the initial segmentation using the intensity / spatial interaction models. The shape model, which is obtained using the training shapes, is registered to the image domain. Finally, the optimal segmentation is obtained using the optimization of the energy functionals. Experiments show that the use of the shape prior improves considerably the accuracy of the alternative methods which use only existing or both information in the image. The proposed methods are tested on the synthetic and clinical images/shapes and they are shown to be robust under various noise levels, occlusions, and missing object information. Vertebral bodies (VBs) in clinical computed tomography (CT) are segmented using the proposed methods to help the bone mineral density measurements and fracture analysis in bones. Experimental results show that the proposed solutions eliminate some of the existing problems in the VB segmentation. One of the most important contributions of this study is to offer a segmentation framework which can be suitable to the clinical works

Medical Robotics

The first generation of surgical robots are already being installed in a number of operating rooms around the world. Robotics is being introduced to medicine because it allows for unprecedented control and precision of surgical instruments in minimally invasive procedures. So far, robots have been used to position an endoscope, perform gallbladder surgery and correct gastroesophogeal reflux and heartburn. The ultimate goal of the robotic surgery field is to design a robot that can be used to perform closed-chest, beating-heart surgery. The use of robotics in surgery will expand over the next decades without any doubt. Minimally Invasive Surgery (MIS) is a revolutionary approach in surgery. In MIS, the operation is performed with instruments and viewing equipment inserted into the body through small incisions created by the surgeon, in contrast to open surgery with large incisions. This minimizes surgical trauma and damage to healthy tissue, resulting in shorter patient recovery time. The aim of this book is to provide an overview of the state-of-art, to present new ideas, original results and practical experiences in this expanding area. Nevertheless, many chapters in the book concern advanced research on this growing area. The book provides critical analysis of clinical trials, assessment of the benefits and risks of the application of these technologies. This book is certainly a small sample of the research activity on Medical Robotics going on around the globe as you read it, but it surely covers a good deal of what has been done in the field recently, and as such it works as a valuable source for researchers interested in the involved subjects, whether they are currently “medical roboticists” or not