An AER handshake-less modular infrastructure PCB with x8 2.5Gbps LVDS serial links

Nowadays spike-based brain processing emulation is taking off. Several EU and others worldwide projects are demonstrating this, like SpiNNaker, BrainScaleS, FACETS, or NeuroGrid. The larger the brain process emulation on silicon is, the higher the communication performance of the hosting platforms has to be. Many times the bottleneck of these system implementations is not on the performance inside a chip or a board, but in the communication between boards. This paper describes a novel modular Address-Event-Representation (AER) FPGA-based (Spartan6) infrastructure PCB (the AER-Node board) with 2.5Gbps LVDS high speed serial links over SATA cables that offers a peak performance of 32-bit 62.5Meps (Mega events per second) on board-to-board communications. The board allows back compatibility with parallel AER devices supporting up to x2 28-bit parallel data with asynchronous handshake. These boards also allow modular expansion functionality through several daughter boards. The paper is focused on describing in detail the LVDS serial interface and presenting its performance.Ministerio de Ciencia e Innovación TEC2009-10639-C04-02/01Ministerio de Economía y Competitividad TEC2012-37868-C04-02/01Junta de Andalucía TIC-6091Ministerio de Economía y Competitividad PRI-PIMCHI-2011-076

AER-based robotic closed-loop control system

Address-Event-Representation (AER) is an asynchronous protocol for transferring the information of spiking neuro-inspired systems. Actually AER systems are able to see, to ear, to process information, and to learn. Regarding to the actuation step, the AER has been used for implementing Central Pattern Generator algorithms, but not for controlling the actuators in a closed-loop spike-based way. In this paper we analyze an AER based model for a real-time neuro-inspired closed-loop control system. We demonstrate it into a differential control system for a two-wheel vehicle using feedback AER information. PFM modulation has been used to power the DC motors of the vehicle and translation into AER of encoder information is also presented for the close-loop. A codesign platform (called AER-Robot), based into a Xilinx Spartan 3 FPGA and an 8051 USB microcontroller, with power stages for four DC motors has been used for the demonstrator.Junta de Andalucía P06-TIC-01417Ministerio de Educación y Ciencia TEC2006-11730-C03-0

An AER-Based Actuator Interface for Controlling an Anthropomorphic Robotic Hand

Bio-Inspired and Neuro-Inspired systems or circuits are a relatively novel approaches to solve real problems by mimicking the biology in its efficient solutions. Robotic also tries to mimic the biology and more particularly the human body structure and efficiency of the muscles, bones, articulations, etc. Address-Event-Representation (AER) is a communication protocol for transferring asynchronous events between VLSI chips, originally developed for neuro-inspired processing systems (for example, image processing). Such systems may consist of a complicated hierarchical structure with many chips that transmit data among them in real time, while performing some processing (for example, convolutions). The information transmitted is a sequence of spikes coded using high speed digital buses. These multi-layer and multi-chip AER systems perform actually not only image processing, but also audio processing, filtering, learning, locomotion, etc. This paper present an AER interface for controlling an anthropomorphic robotic hand with a neuro-inspired system.Unión Europea IST-2001-34124 (CAVIAR)Ministerio de Ciencia y Tecnología TIC-2003-08164-C03-0

Impulse-based asynchronous serial communication protocol on optical fiber link for AER systems

We developed an Impulse-Based Asynchronous Serial Address-Event Representation (IB-AS-AER) protocol. It allows for full-duplex communication and explicit flow control, does not require any clock data recovery or accurate clock relationship between the transmitter and receiver. Moreover, the optical fiber communication link, that galvanically isolates the communicating devices, highly improves the robustness to electromagnetic disturbances, reduces the power consumption and allows for high data rate transmissions. In addition, the proposed implementation does not require any specific hardware and can be developed on low-cost FPGAs as well as on full-custom ASICs. Preliminary tests performed at 100 Mbps raw bit transfer rate confirm a 32 bit maximum event rate of 2.9 Meps

AER Neuro-Inspired interface to Anthropomorphic Robotic Hand

Address-Event-Representation (AER) is a communication protocol for transferring asynchronous events between VLSI chips, originally developed for neuro-inspired processing systems (for example, image processing). Such systems may consist of a complicated hierarchical structure with many chips that transmit data among them in real time, while performing some processing (for example, convolutions). The information transmitted is a sequence of spikes coded using high speed digital buses. These multi-layer and multi-chip AER systems perform actually not only image processing, but also audio processing, filtering, learning, locomotion, etc. This paper present an AER interface for controlling an anthropomorphic robotic hand with a neuro-inspired system.Unión Europea IST-2001-34124 (CAVIAR)Ministerio de Ciencia y Tecnología TIC-2003-08164-C03-02Ministerio de Ciencia y Tecnología TIC2000-0406-P4- 0

Low-power CMOS digital-pixel Imagers for high-speed uncooled PbSe IR applications

This PhD dissertation describes the research and development of a new low-cost medium wavelength infrared MWIR monolithic imager technology for high-speed uncooled industrial applications. It takes the baton on the latest technological advances in the field of vapour phase deposition (VPD) PbSe-based medium wavelength IR (MWIR) detection accomplished by the industrial partner NIT S.L., adding fundamental knowledge on the investigation of novel VLSI analog and mixed-signal design techniques at circuit and system levels for the development of the readout integrated device attached to the detector. The work supports on the hypothesis that, by the use of the preceding design techniques, current standard inexpensive CMOS technologies fulfill all operational requirements of the VPD PbSe detector in terms of connectivity, reliability, functionality and scalability to integrate the device. The resulting monolithic PbSe-CMOS camera must consume very low power, operate at kHz frequencies, exhibit good uniformity and fit the CMOS read-out active pixels in the compact pitch of the focal plane, all while addressing the particular characteristics of the MWIR detector: high dark-to-signal ratios, large input parasitic capacitance values and remarkable mismatching in PbSe integration. In order to achieve these demands, this thesis proposes null inter-pixel crosstalk vision sensor architectures based on a digital-only focal plane array (FPA) of configurable pixel sensors. Each digital pixel sensor (DPS) cell is equipped with fast communication modules, self-biasing, offset cancellation, analog-to-digital converter (ADC) and fixed pattern noise (FPN) correction. In-pixel power consumption is minimized by the use of comprehensive MOSFET subthreshold operation. The main aim is to potentiate the integration of PbSe-based infra-red (IR)-image sensing technologies so as to widen its use, not only in distinct scenarios, but also at different stages of PbSe-CMOS integration maturity. For this purpose, we posit to investigate a comprehensive set of functional blocks distributed in two parallel approaches: • Frame-based “Smart” MWIR imaging based on new DPS circuit topologies with gain and offset FPN correction capabilities. This research line exploits the detector pitch to offer fully-digital programmability at pixel level and complete functionality with input parasitic capacitance compensation and internal frame memory. • Frame-free “Compact”-pitch MWIR vision based on a novel DPS lossless analog integrator and configurable temporal difference, combined with asynchronous communication protocols inside the focal plane. This strategy is conceived to allow extensive pitch compaction and readout speed increase by the suppression of in-pixel digital filtering, and the use of dynamic bandwidth allocation in each pixel of the FPA. In order make the electrical validation of first prototypes independent of the expensive PbSe deposition processes at wafer level, investigation is extended as well to the development of affordable sensor emulation strategies and integrated test platforms specifically oriented to image read-out integrated circuits. DPS cells, imagers and test chips have been fabricated and characterized in standard 0.15μm 1P6M, 0.35μm 2P4M and 2.5μm 2P1M CMOS technologies, all as part of research projects with industrial partnership. The research has led to the first high-speed uncooled frame-based IR quantum imager monolithically fabricated in a standard VLSI CMOS technology, and has given rise to the Tachyon series [1], a new line of commercial IR cameras used in real-time industrial, environmental and transportation control systems. The frame-free architectures investigated in this work represent a firm step forward to push further pixel pitch and system bandwidth up to the limits imposed by the evolving PbSe detector in future generations of the device.La present tesi doctoral descriu la recerca i el desenvolupament d'una nova tecnologia monolítica d'imatgeria infraroja de longitud d'ona mitja (MWIR), no refrigerada i de baix cost, per a usos industrials d'alta velocitat. El treball pren el relleu dels últims avenços assolits pel soci industrial NIT S.L. en el camp dels detectors MWIR de PbSe depositats en fase vapor (VPD), afegint-hi coneixement fonamental en la investigació de noves tècniques de disseny de circuits VLSI analògics i mixtes pel desenvolupament del dispositiu integrat de lectura unit al detector pixelat. Es parteix de la hipòtesi que, mitjançant l'ús de les esmentades tècniques de disseny, les tecnologies CMOS estàndard satisfan tots els requeriments operacionals del detector VPD PbSe respecte a connectivitat, fiabilitat, funcionalitat i escalabilitat per integrar de forma econòmica el dispositiu. La càmera PbSe-CMOS resultant ha de consumir molt baixa potència, operar a freqüències de kHz, exhibir bona uniformitat, i encabir els píxels actius CMOS de lectura en el pitch compacte del pla focal de la imatge, tot atenent a les particulars característiques del detector: altes relacions de corrent d'obscuritat a senyal, elevats valors de capacitat paràsita a l'entrada i dispersions importants en el procés de fabricació. Amb la finalitat de complir amb els requisits previs, es proposen arquitectures de sensors de visió de molt baix acoblament interpíxel basades en l'ús d'una matriu de pla focal (FPA) de píxels actius exclusivament digitals. Cada píxel sensor digital (DPS) està equipat amb mòduls de comunicació d'alta velocitat, autopolarització, cancel·lació de l'offset, conversió analògica-digital (ADC) i correcció del soroll de patró fixe (FPN). El consum en cada cel·la es minimitza fent un ús exhaustiu del MOSFET operant en subllindar. L'objectiu últim és potenciar la integració de les tecnologies de sensat d'imatge infraroja (IR) basades en PbSe per expandir-ne el seu ús, no només a diferents escenaris, sinó també en diferents estadis de maduresa de la integració PbSe-CMOS. En aquest sentit, es proposa investigar un conjunt complet de blocs funcionals distribuïts en dos enfocs paral·lels: - Dispositius d'imatgeria MWIR "Smart" basats en frames utilitzant noves topologies de circuit DPS amb correcció de l'FPN en guany i offset. Aquesta línia de recerca exprimeix el pitch del detector per oferir una programabilitat completament digital a nivell de píxel i plena funcionalitat amb compensació de la capacitat paràsita d'entrada i memòria interna de fotograma. - Dispositius de visió MWIR "Compact"-pitch "frame-free" en base a un novedós esquema d'integració analògica en el DPS i diferenciació temporal configurable, combinats amb protocols de comunicació asíncrons dins del pla focal. Aquesta estratègia es concep per permetre una alta compactació del pitch i un increment de la velocitat de lectura, mitjançant la supressió del filtrat digital intern i l'assignació dinàmica de l'ample de banda a cada píxel de l'FPA. Per tal d'independitzar la validació elèctrica dels primers prototips respecte a costosos processos de deposició del PbSe sensor a nivell d'oblia, la recerca s'amplia també al desenvolupament de noves estratègies d'emulació del detector d'IR i plataformes de test integrades especialment orientades a circuits integrats de lectura d'imatge. Cel·les DPS, dispositius d'imatge i xips de test s'han fabricat i caracteritzat, respectivament, en tecnologies CMOS estàndard 0.15 micres 1P6M, 0.35 micres 2P4M i 2.5 micres 2P1M, tots dins el marc de projectes de recerca amb socis industrials. Aquest treball ha conduït a la fabricació del primer dispositiu quàntic d'imatgeria IR d'alta velocitat, no refrigerat, basat en frames, i monolíticament fabricat en tecnologia VLSI CMOS estàndard, i ha donat lloc a Tachyon, una nova línia de càmeres IR comercials emprades en sistemes de control industrial, mediambiental i de transport en temps real.Postprint (published version

Low Latency Event-Based Filtering and Feature Extraction for Dynamic Vision Sensors in Real-Time FPGA Applications

Dynamic Vision Sensor (DVS) pixels produce an asynchronous variable-rate address-event output that represents brightness changes at the pixel. Since these sensors produce frame-free output, they are ideal for real-time dynamic vision applications with real-time latency and power system constraints. Event-based ltering algorithms have been proposed to post-process the asynchronous event output to reduce sensor noise, extract low level features, and track objects, among others. These postprocessing algorithms help to increase the performance and accuracy of further processing for tasks such as classi cation using spike-based learning (ie. ConvNets), stereo vision, and visually-servoed robots, etc. This paper presents an FPGA-based library of these postprocessing event-based algorithms with implementation details; speci cally background activity (noise) ltering, pixel masking, object motion detection and object tracking. The latencies of these lters on the Field Programmable Gate Array (FPGA) platform are below 300ns with an average latency reduction of 188% (maximum of 570%) over the software versions running on a desktop PC CPU. This open-source event-based lter IP library for FPGA has been tested on two different platforms and scenarios using different synthesis and implementation tools for Lattice and Xilinx vendors

An AER to CAN Bridge for Spike-Based Robot Control

Address-Event-Representation (AER) is a bio-inspired communication protocol between chips. A set of AER sensors (retina and cochleas), processors (convolvers, WTA, mappers, …) and actuators can be found in the literature that have been specifically designed for mimicking the communication principle in the brain: spikes. The problem when developing complex robots based on AER (or spikes) is to command actuators (motors) directly with spikes. Commercial robots are usually based on commercial standards (CAN) that do not allow powering actuators directly with spikes. This paper presents a co-design FPGA and embedded computer system that implements a bridge between these two protocols: CAN and AER. The bridge has been analyzed under the Spanish project VULCANO1 with an arm robot and a Shadow anthropomorphic hand.Ministerio de Ciencia e Innovación TEC2009-10639-C04-0

Scalable High-Speed Communications for Neuromorphic Systems

Field-programmable gate arrays (FPGA), application-specific integrated circuits (ASIC), and other chip/multi-chip level implementations can be used to implement Dynamic Adaptive Neural Network Arrays (DANNA). In some applications, DANNA interfaces with a traditional computing system to provide neural network configuration information, provide network input, process network outputs, and monitor the state of the network. The present host-to-DANNA network communication setup uses a Cypress USB 3.0 peripheral controller (FX3) to enable host-to-array communication over USB 3.0. This communications setup has to run commands in batches and does not have enough bandwidth to meet the maximum throughput requirements of the DANNA device, resulting in output packet loss. Also, the FX3 is unable to scale to support larger single-chip or multi-chip configurations. To alleviate communication limitations and to expand scalability, a new communications solution is presented which takes advantage of the GTX/GTH high-speed serial transceivers found on Xilinx FPGAs. A Xilinx VC707 evaluation kit is used to prototype the new communications board. The high-speed transceivers are used to communicate to the host computer via PCIe and to communicate to the DANNA arrays with the link layer protocol Aurora. The new communications board is able to outperform the FX3, reducing the latency in the communication and increasing the throughput of data. This new communications setup will be used to further DANNA research by allowing the DANNA arrays to scale to larger sizes and for multiple DANNA arrays to be connected to a single communication board

Digital desing for neuroporphic bio-inspired vision processing.

Artificial Intelligence (AI) is an exciting technology that flourished in this century. One of the goals for this technology is to give learning ability to computers. Currently, machine intelligence surpasses human intelligence in specific domains. Besides some conventional machine learning algorithms, Artificial Neural Networks (ANNs) is arguably the most exciting technology that is used to bring this intelligence to the computer world. Due to ANN’s advanced performance, increasing number of applications that need kind of intelligence are using ANN. Neuromorphic engineers are trying to introduce bio-inspired hardware for efficient implementation of neural networks. This hardware should be able to simulate a vast number of neurons in real-time with complex synaptic connectivity while consuming little power. The work that has been done in this thesis is hardware oriented, so it is necessary for the reader to have a good understanding of the hardware that is used for developments in this thesis. In this chapter, we provide a brief overview of the hardware platforms that are used in this thesis. Afterward, we explain briefly the contributions of this thesis to the bio-inspired processing research line