Prediction of stable walking for a toy that cannot stand

Previous experiments [M. J. Coleman and A. Ruina, Phys. Rev. Lett. 80, 3658 (1998)] showed that a gravity-powered toy with no control and which has no statically stable near-standing configurations can walk stably. We show here that a simple rigid-body statically-unstable mathematical model based loosely on the physical toy can predict stable limit-cycle walking motions. These calculations add to the repertoire of rigid-body mechanism behaviors as well as further implicating passive-dynamics as a possible contributor to stability of animal motions.Comment: Note: only corrections so far have been fixing typo's in these comments. 3 pages, 2 eps figures, uses epsf.tex, revtex.sty, amsfonts.sty, aps.sty, aps10.sty, prabib.sty; Accepted for publication in Phys. Rev. E. 4/9/2001 ; information about Andy Ruina's lab (including Coleman's, Garcia's and Ruina's other publications and associated video clips) can be found at: http://www.tam.cornell.edu/~ruina/hplab/index.html and more about Georg Bock's Simulation Group with whom Katja Mombaur is affiliated can be found at http://www.iwr.uni-heidelberg.de/~agboc

Imprecise dynamic walking with time-projection control

We present a new walking foot-placement controller based on 3LP, a 3D model of bipedal walking that is composed of three pendulums to simulate falling, swing and torso dynamics. Taking advantage of linear equations and closed-form solutions of the 3LP model, our proposed controller projects intermediate states of the biped back to the beginning of the phase for which a discrete LQR controller is designed. After the projection, a proper control policy is generated by this LQR controller and used at the intermediate time. This control paradigm reacts to disturbances immediately and includes rules to account for swing dynamics and leg-retraction. We apply it to a simulated Atlas robot in position-control, always commanded to perform in-place walking. The stance hip joint in our robot keeps the torso upright to let the robot naturally fall, and the swing hip joint tracks the desired footstep location. Combined with simple Center of Pressure (CoP) damping rules in the low-level controller, our foot-placement enables the robot to recover from strong pushes and produce periodic walking gaits when subject to persistent sources of disturbance, externally or internally. These gaits are imprecise, i.e., emergent from asymmetry sources rather than precisely imposing a desired velocity to the robot. Also in extreme conditions, restricting linearity assumptions of the 3LP model are often violated, but the system remains robust in our simulations. An extensive analysis of closed-loop eigenvalues, viable regions and sensitivity to push timings further demonstrate the strengths of our simple controller

Development of Biomimetic-Based Controller Design Methods for Advanced Energy Systems

A biologically inspired optimal control strategy, denoted as BIO-CS, is proposed for advanced energy systems applications. This strategy combines the ant\u27s rule of pursuit idea with multi-agent and optimal control concepts. The BIO-CS algorithm employs gradient-based optimal control solvers for the intermediate problems associated with the leader-follower agents\u27 local interactions. The developed BIO-CS is integrated with an Artificial Neural Network (ANN)-based adaptive component for further improvement of the overall framework. In particular, the ANN component captures the mismatch between the controller and the plant models by using a single-hidden-layer technique with online learning capabilities to augment the baseline BIO-CS control laws. The resulting approach is a unique combination of biomimetic control and data-driven methods that provides optimal solutions for dynamic systems.;The applicability of the proposed framework is illustrated via an Integrated Gasification Combined Cycle (IGCC) process with carbon capture as an advanced energy system example. Specifically, a multivariable control structure associated with a subsystem of the IGCC plant simulation in DYNSIMRTM software platform is addressed. The proposed control laws are derived in MATLAB RTM environment, while the plant models are built in DYNSIM RTM, and a previously developed MATLABRTM-DYNSIM RTM link is employed for implementation purposes. The proposed integrated approach improves the overall performance of the process up to 85% in terms of reducing the output tracking error when compared to stand-alone BIO-CS and Proportional-Integral (PI) controller implementations, resulting in faster setpoint tracking.;Other applications of BIO-CS addressed include: i) a nonlinear fermentation process to produce ethanol; and ii) a transfer function model derived from the cyber-physical fuel cell-gas turbine hybrid power system that is part of the Hybrid Performance (HYPER) project at the National Energy Technology Laboratory (NETL). Other theoretical developments in this work correspond to the integration of the BIO-CS approach with Multi-Agent Optimization (MAO) techniques and casting BIO-CS as a Model Predictive Controller (MPC). These developments are demonstrated by revisiting the fermentation process example. The proposed biologically-inspired approaches provide a promising alternative for advanced control of energy systems of the future

In silico case studies of compliant robots: AMARSI deliverable 3.3

In the deliverable 3.2 we presented how the morphological computing ap- proach can significantly facilitate the control strategy in several scenarios, e.g. quadruped locomotion, bipedal locomotion and reaching. In particular, the Kitty experimental platform is an example of the use of morphological computation to allow quadruped locomotion. In this deliverable we continue with the simulation studies on the application of the different morphological computation strategies to control a robotic system

To Wave Or Not To Wave? Order Release Policies for Warehouses with an Automated Sorter

Wave-based release policies are prevalent in warehouses with an automated sorter, and take different forms depending on how much waves overlap and whether the sorter is split for operating purposes. Waveless release is emerging as an alternative policy adopted by an increasing number of firms. While that new policy presents several advantages relative to waves, it also involves the possibility of gridlock at the sorter. In collaboration with a large US online retailer and using an extensive dataset of detailed flow information, we first develop a model with validated predictive accuracy for its warehouses operating under a waveless release policy. We then use that model to compute operational guidelines for dynamically controlling the main parameter of its waveless policy, with the goal of maximizing throughput while keeping the risk of gridlock under a specified threshold. Secondly, we leverage that model and dataset to perform through simulation a performance comparison of wave-based and waveless policies in this context. Our waveless policy yields larger or equal throughput than the best performing wave-based policy with a lower gridlock probability in all scenarios considered. Waveless release policies thus appear to merit very serious consideration by practitioners. Facilities using a non-overlapping wave policy should also consider overlapping waves or a split sorter policy

MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics

El libro de actas recoge las aportaciones de los autores a través de los correspondientes artículos a la Dinámica de Sistemas Multicuerpo y la Mecatrónica (Musme). Estas disciplinas se han convertido en una importante herramienta para diseñar máquinas, analizar prototipos virtuales y realizar análisis CAD sobre complejos sistemas mecánicos articulados multicuerpo. La dinámica de sistemas multicuerpo comprende un gran número de aspectos que incluyen la mecánica, dinámica estructural, matemáticas aplicadas, métodos de control, ciencia de los ordenadores y mecatrónica. Los artículos recogidos en el libro de actas están relacionados con alguno de los siguientes tópicos del congreso: Análisis y síntesis de mecanismos ; Diseño de algoritmos para sistemas mecatrónicos ; Procedimientos de simulación y resultados ; Prototipos y rendimiento ; Robots y micromáquinas ; Validaciones experimentales ; Teoría de simulación mecatrónica ; Sistemas mecatrónicos ; Control de sistemas mecatrónicosUniversitat Politècnica de València (2011). MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/13224Archivo delegad

Aeroelastic Phenomena and Pedestrian-Structure Dynamic Interaction on Non-Conventional Bridges and Footbridges

Fluid-structure and pedestrian-structure interaction phenomena are extremely important for non-conventional bridges. The results presented in this volume concern: simplified formulas for flutter assessment; innovative structural solutions to increase the aeroelastic stability of long-span bridges; numerical simulations of the flow around a benchmark rectangular cylinder; examples of designs of large structures assisted by wind-tunnel tests; analytical, computational and experimental investigation of the synchronisation mechanisms between pedestrians and footbridge structures. The present book is addressed to a wide audience including professionals, doctoral students and researchers, aiming to increase their know-how in the field of wind engineering, bluff-body aerodynamics and bridge dynamics

Discrete Time Analysis of Consolidated Transport Processes

Diese Arbeit beschäftigt sich mit der Entwicklung zeitdiskreter Modelle zur Analyse von Transportbündelungen. Mit den entwickelten Modellen für Bestands- und Fahrzeugbündelungen, insbesondere Milkrun-Systeme, kann eine detaillierte Leistungsbewertung in kurzer Zeit durchgeführt werden. Darüber hinaus erlauben die Modelle die Analyse der Umschlagslagerbündelungen, beispielweise Hub-und-Spoke-Netzwerke, indem sie im Rahmen einer Netzwerkanalyse mit einander verknüpft werden