Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas

The main interest of this thesis consists of the study and implementation of postprocessors to adapt the toolpath generated by a Computer Aided Manufacturing (CAM) system to a complex robotic workcell of eight joints, devoted to the rapid prototyping of 3D CAD-defined products. It consists of a 6R industrial manipulator mounted on a linear track and synchronized with a rotary table. To accomplish this main objective, previous work is required. Each task carried out entails a methodology, objective and partial results that complement each other, namely: - It is described the architecture of the workcell in depth, at both displacement and joint-rate levels, for both direct and inverse resolutions. The conditioning of the Jacobian matrix is described as kinetostatic performance index to evaluate the vicinity to singular postures. These ones are analysed from a geometric point of view. - Prior to any machining, the additional external joints require a calibration done in situ, usually in an industrial environment. A novel Non-contact Planar Constraint Calibration method is developed to estimate the external joints configuration parameters by means of a laser displacement sensor. - A first control is originally done by means of a fuzzy inference engine at the displacement level, which is integrated within the postprocessor of the CAM software. - Several Redundancy Resolution Schemes (RRS) at the joint-rate level are compared for the configuration of the postprocessor, dealing not only with the additional joints (intrinsic redundancy) but also with the redundancy due to the symmetry on the milling tool (functional redundancy). - The use of these schemes is optimized by adjusting two performance criterion vectors related to both singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done during the path tracking. Two innovative fuzzy inference engines actively adjust the weight of each joint in these tasks.Andrés De La Esperanza, FJ. (2011). Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/10627Palanci

Approximation of the inverse kinematics of a robotic manipulator using a neural network

A fundamental property of a robotic manipulator system is that it is capable of accurately following complex position trajectories in three-dimensional space. An essential component of the robotic control system is the solution of the inverse kinematics problem which allows determination of the joint angle trajectories from the desired trajectory in the Cartesian space. There are several traditional methods based on the known geometry of robotic manipulators to solve the inverse kinematics problem. These methods can become impractical in a robot-vision control system where the environmental parameters can alter. Artificial neural networks with their inherent learning ability can approximate the inverse kinematics function and do not require any knowledge of the manipulator geometry. This thesis concentrates on developing a practical solution using a radial basis function network to approximate the inverse kinematics of a robot manipulator. This approach is distinct from existing approaches as the centres of the hidden-layer units are regularly distributed in the workspace, constrained training data is used and the training phase is performed using either the strict interpolation or the least mean square algorithms. An online retraining approach is also proposed to modify the network function approximation to cope with the situation where the initial training and application environments are different. Simulation results for two and three-link manipulators verify the approach. A novel real-time visual measurement system, based on a video camera and image processing software, has been developed to measure the position of the robotic manipulator in the three-dimensional workspace. Practical experiments have been performed with a Mitsubishi PA10-6CE manipulator and this visual measurement system. The performance of the radial basis function network is analysed for the manipulator operating in two and three-dimensional space and the practical results are compared to the simulation results. Advantages and disadvantages of the proposed approach are discussed

MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics

El libro de actas recoge las aportaciones de los autores a través de los correspondientes artículos a la Dinámica de Sistemas Multicuerpo y la Mecatrónica (Musme). Estas disciplinas se han convertido en una importante herramienta para diseñar máquinas, analizar prototipos virtuales y realizar análisis CAD sobre complejos sistemas mecánicos articulados multicuerpo. La dinámica de sistemas multicuerpo comprende un gran número de aspectos que incluyen la mecánica, dinámica estructural, matemáticas aplicadas, métodos de control, ciencia de los ordenadores y mecatrónica. Los artículos recogidos en el libro de actas están relacionados con alguno de los siguientes tópicos del congreso: Análisis y síntesis de mecanismos ; Diseño de algoritmos para sistemas mecatrónicos ; Procedimientos de simulación y resultados ; Prototipos y rendimiento ; Robots y micromáquinas ; Validaciones experimentales ; Teoría de simulación mecatrónica ; Sistemas mecatrónicos ; Control de sistemas mecatrónicosUniversitat Politècnica de València (2011). MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/13224Archivo delegad

MODELING AND SIMULATION OF INDUSTRIAL ROBOT ARMS USING SIMSCAPE MULTIBODY

The dynamic simulation modeling problem of industrial robot arm is solved, and the trajectory planning dynamic simulation is performed in this paper. In response to the lack of trajectory planning and motion controller interfaces in the robotic modelling study, including the lack of dynamic simulation visualization, a Simscape Multibody-based method for building a dynamic model of industrial robot arm is proposed and the effectiveness of the model is verified through dynamic simulation. The simulation model integrates the robotic arm trajectory planning, motion controller and data acquisition module. It has a clear structure and the parameters are easy to modify. It can reasonably simulate the structure and parameters of the research object and facilitate the subsequent research of related algorithms. It provides an innovative and open-source research and development platform for the dynamic simulation study of the robot arm

A comparison of force control algorithms for robots in contact with flexible environments

In order to perform useful tasks, the robot end-effector must come into contact with its environment. For such tasks, force feedback is frequently used to control the interaction forces. Control of these forces is complicated by the fact that the flexibility of the environment affects the stability of the force control algorithm. Because of the wide variety of different materials present in everyday environments, it is necessary to gain an understanding of how environmental flexibility affects the stability of force control algorithms. This report presents the theory and experimental results of two force control algorithms: Position Accommodation Control and Direct Force Servoing. The implementation of each of these algorithms on a two-arm robotic test bed located in the Center for Intelligent Robotic Systems for Space Exploration (CIRSSE) is discussed in detail. The behavior of each algorithm when contacting materials of different flexibility is experimentally determined. In addition, several robustness improvements to the Direct Force Servoing algorithm are suggested and experimentally verified. Finally, a qualitative comparison of the force control algorithms is provided, along with a description of a general tuning process for each control method

Optimal redundancy control for robot manipulators

Optimal control for kinematically redundant robots is addressed for two different optimization problems. In the first optimization problem, we consider the minimization of the transfer time along a given Cartesian path for a redundant robot. This problem can be solved in two steps, by separating the generation of a joint path associated to the Cartesian path from the exact minimization of motion time under kinematic/dynamic bounds along the obtained parametrized joint path. In this thesis, multiple sub-optimal solutions can be found, depending on how redundancy is locally resolved in the joint space within the first step. A solution method that works at the acceleration level is proposed, by using weighted pseudoinversion, optimizing an inertia-related criterion, and including null-space damping. The obtained results demonstrate consistently good behaviors and definitely faster motion times in comparison with related methods proposed in the literature. The motion time obtained with the proposed method is close to the global time-optimal solution along the same Cartesian path. Furthermore, a reasonable tracking control performance is obtained on the experimental executed motions. In the second optimization problem, we consider the known phenomenon of torque oscillations and motion instabilities that occur in redundant robots during the execution of sufficiently long Cartesian trajectories when the joint torque is instantaneously minimized. In the framework of on-line local redundancy resolution methods, we propose basic variations of the minimum torque scheme to address this issue. Either the joint torque norm is minimized over two successive discrete-time samples using a short preview window, or we minimize the norm of the difference with respect to a desired momentum-damping joint torque, or the two schemes are combined together. The resulting local control methods are all formulated as well-posed linear-quadratic problems, and their closed-form solutions generate also low joint velocities while addressing the primary torque optimization objectives. Stable and consistent behaviors are obtained along short or long Cartesian position trajectories. For the two addressed optimization problems in this thesis, the results are obtained using three different robot systems, namely a 3R planar arm, a 6R Universal Robots UR10, and a 7R KUKA LWR robot

Industrial robot trajectory optimization- a review

This paper is the result of the literature review on the trajectory optimization of the serial industrial robots, a study developed in a wider research in the field of the trajectory generation mechanisms of the serial industrial robots. After a short presentation of the importance of the industrial robots in the current context and future challenges, are presented the main optimal trajectory planning criteria approached in several specialized scientific papers, especially in the last few years

Robot Visual Servoing Using Discontinuous Control

This work presents different proposals to deal with common problems in robot visual servoing based on the application of discontinuous control methods. The feasibility and effectiveness of the proposed approaches are substantiated by simulation results and real experiments using a 6R industrial manipulator. The main contributions are: - Geometric invariance using sliding mode control (Chapter 3): the defined higher-order invariance is used by the proposed approaches to tackle problems in visual servoing. Proofs of invariance condition are presented. - Fulfillment of constraints in visual servoing (Chapter 4): the proposal uses sliding mode methods to satisfy mechanical and visual constraints in visual servoing, while a secondary task is considered to properly track the target object. The main advantages of the proposed approach are: low computational cost, robustness and fully utilization of the allowed space for the constraints. - Robust auto tool change for industrial robots using visual servoing (Chapter 4): visual servoing and the proposed method for constraints fulfillment are applied to an automated solution for tool changing in industrial robots. The robustness of the proposed method is due to the control law of the visual servoing, which uses the information acquired by the vision system to close a feedback control loop. Furthermore, sliding mode control is simultaneously used in a prioritized level to satisfy the aforementioned constraints. Thus, the global control accurately places the tool in the warehouse, but satisfying the robot constraints. - Sliding mode controller for reference tracking (Chapter 5): an approach based on sliding mode control is proposed for reference tracking in robot visual servoing using industrial robot manipulators. The novelty of the proposal is the introduction of a sliding mode controller that uses a high-order discontinuous control signal, i.e., joint accelerations or joint jerks, in order to obtain a smoother behavior and ensure the robot system stability, which is demonstrated with a theoretical proof. - PWM and PFM for visual servoing in fully decoupled approaches (Chapter 6): discontinuous control based on pulse width and pulse frequency modulation is proposed for fully decoupled position based visual servoing approaches, in order to get the same convergence time for camera translation and rotation. Moreover, other results obtained in visual servoing applications are also described.Este trabajo presenta diferentes propuestas para tratar problemas habituales en el control de robots por realimentación visual, basadas en la aplicación de métodos de control discontinuos. La viabilidad y eficacia de las propuestas se fundamenta con resultados en simulación y con experimentos reales utilizando un robot manipulador industrial 6R. Las principales contribuciones son: - Invariancia geométrica utilizando control en modo deslizante (Capítulo 3): la invariancia de alto orden definida aquí es utilizada después por los métodos propuestos, para tratar problemas en control por realimentación visual. Se apuertan pruebas teóricas de la condición de invariancia. - Cumplimiento de restricciones en control por realimentación visual (Capítulo 4): esta propuesta utiliza métodos de control en modo deslizante para satisfacer restricciones mecánicas y visuales en control por realimentación visual, mientras una tarea secundaria se encarga del seguimiento del objeto. Las principales ventajas de la propuesta son: bajo coste computacional, robustez y plena utilización del espacio disponible para las restricciones. - Cambio de herramienta robusto para un robot industrial mediante control por realimentación visual (Capítulo 4): el control por realimentación visual y el método propuesto para el cumplimiento de las restricciones se aplican a una solución automatizada para el cambio de herramienta en robots industriales. La robustez de la propuesta radica en el uso del control por realimentación visual, que utiliza información del sistema de visión para cerrar el lazo de control. Además, el control en modo deslizante se utiliza simultáneamente en un nivel de prioridad superior para satisfacer las restricciones. Así pues, el control es capaz de dejar la herramienta en el intercambiador de herramientas de forma precisa, a la par que satisface las restricciones del robot. - Controlador en modo deslizante para seguimiento de referencia (Capítulo 5): se propone un enfoque basado en el control en modo deslizante para seguimiento de referencia en robots manipuladores industriales controlados por realimentación visual. La novedad de la propuesta radica en la introducción de un controlador en modo deslizante que utiliza la señal de control discontinua de alto orden, i.e. aceleraciones o jerks de las articulaciones, para obtener un comportamiento más suave y asegurar la estabilidad del sistema robótico, lo que se demuestra con una prueba teórica. - Control por realimentación visual mediante PWM y PFM en métodos completamente desacoplados (Capítulo 6): se propone un control discontinuo basado en modulación del ancho y frecuencia del pulso para métodos completamente desacoplados de control por realimentación visual basados en posición, con el objetivo de conseguir el mismo tiempo de convergencia para los movimientos de rotación y traslación de la cámara . Además, se presentan también otros resultados obtenidos en aplicaciones de control por realimentación visual.Aquest treball presenta diferents propostes per a tractar problemes habituals en el control de robots per realimentació visual, basades en l'aplicació de mètodes de control discontinus. La viabilitat i eficàcia de les propostes es fonamenta amb resultats en simulació i amb experiments reals utilitzant un robot manipulador industrial 6R. Les principals contribucions són: - Invariància geomètrica utilitzant control en mode lliscant (Capítol 3): la invariància d'alt ordre definida ací és utilitzada després pels mètodes proposats, per a tractar problemes en control per realimentació visual. S'aporten proves teòriques de la condició d'invariància. - Compliment de restriccions en control per realimentació visual (Capítol 4): aquesta proposta utilitza mètodes de control en mode lliscant per a satisfer restriccions mecàniques i visuals en control per realimentació visual, mentre una tasca secundària s'encarrega del seguiment de l'objecte. Els principals avantatges de la proposta són: baix cost computacional, robustesa i plena utilització de l'espai disponible per a les restriccions. - Canvi de ferramenta robust per a un robot industrial mitjançant control per realimentació visual (Capítol 4): el control per realimentació visual i el mètode proposat per al compliment de les restriccions s'apliquen a una solució automatitzada per al canvi de ferramenta en robots industrials. La robustesa de la proposta radica en l'ús del control per realimentació visual, que utilitza informació del sistema de visió per a tancar el llaç de control. A més, el control en mode lliscant s'utilitza simultàniament en un nivell de prioritat superior per a satisfer les restriccions. Així doncs, el control és capaç de deixar la ferramenta en l'intercanviador de ferramentes de forma precisa, a la vegada que satisfà les restriccions del robot. - Controlador en mode lliscant per a seguiment de referència (Capítol 5): es proposa un enfocament basat en el control en mode lliscant per a seguiment de referència en robots manipuladors industrials controlats per realimentació visual. La novetat de la proposta radica en la introducció d'un controlador en mode lliscant que utilitza senyal de control discontínua d'alt ordre, i.e. acceleracions o jerks de les articulacions, per a obtindre un comportament més suau i assegurar l'estabilitat del sistema robòtic, la qual cosa es demostra amb una prova teòrica. - Control per realimentació visual mitjançant PWM i PFM en mètodes completament desacoblats (Capítol 6): es proposa un control discontinu basat en modulació de l'ample i la freqüència del pols per a mètodes completament desacoblats de control per realimentació visual basats en posició, amb l'objectiu d'aconseguir el mateix temps de convergència per als moviments de rotació i translació de la càmera. A més, es presenten també altres resultats obtinguts en aplicacions de control per realimentació visual.Muñoz Benavent, P. (2017). Robot Visual Servoing Using Discontinuous Control [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90430TESI

Automated NDT inspection for large and complex geometries of composite materials

Large components with complex geometries, made of composite materials, have become very common in modern structures. To cope with future demand projections, it is necessary to overcome the current non-destructive testing (NDT) bottlenecks encountered during the inspection phase of manufacture. This thesis investigates several aspects of the introduction of automation within the inspection process of complex parts. The use of six-axis robots for product inspection and non-destructive testing systems is the central investigation of this thesis. The challenges embraced by the research include the development of a novel controlling approach for robotic manipulators and of novel path-planning strategies. The integration of robot manipulators and NDT data acquisition instruments is optimized. An effective and reliable way to encode the NDT data through the interpolated robot feedback positions is implemented. The viability of the new external control method is evaluated experimentally. The observed maximum position and orientation errors are respectively within 2mm and within 1 degree, over an operating envelope of 3m³. A new software toolbox (RoboNDT), aimed at NDT technicians, has been developed during this work. RoboNDT is intended to transform the robot path-planning problem into an easy step of the inspection process. The software incorporates the novel path-planning algorithms developed during this research and is shaped to overcome practical limitations of current OLP software. The software has been experimentally validated using scans on real high value aerospace components. RoboNDT delivers tool-path errors that are lower than the errors given by commercial off-line path-planning software. For example the variability of the standoff is within 10 mm for the tool-paths created with the commercial software and within 4.5 mm for the RoboNDT tool-paths, over a scanned area of 1.6m². The output of this research was used to support a 3-year industrial project, called IntACom and led by TWI on behalf of major aerospace sponsors. The result is a demonstrator system, currently in use at TWI Technology Centre, which is capable of inspecting complex geometries with high throughput. The IntACom system can scan real components 2.8 times faster than traditional 3-DoF scanners deploying phased-array inspection and 6.7 times faster than commercial gantry systems deploying traditional single-element inspection.Large components with complex geometries, made of composite materials, have become very common in modern structures. To cope with future demand projections, it is necessary to overcome the current non-destructive testing (NDT) bottlenecks encountered during the inspection phase of manufacture. This thesis investigates several aspects of the introduction of automation within the inspection process of complex parts. The use of six-axis robots for product inspection and non-destructive testing systems is the central investigation of this thesis. The challenges embraced by the research include the development of a novel controlling approach for robotic manipulators and of novel path-planning strategies. The integration of robot manipulators and NDT data acquisition instruments is optimized. An effective and reliable way to encode the NDT data through the interpolated robot feedback positions is implemented. The viability of the new external control method is evaluated experimentally. The observed maximum position and orientation errors are respectively within 2mm and within 1 degree, over an operating envelope of 3m³. A new software toolbox (RoboNDT), aimed at NDT technicians, has been developed during this work. RoboNDT is intended to transform the robot path-planning problem into an easy step of the inspection process. The software incorporates the novel path-planning algorithms developed during this research and is shaped to overcome practical limitations of current OLP software. The software has been experimentally validated using scans on real high value aerospace components. RoboNDT delivers tool-path errors that are lower than the errors given by commercial off-line path-planning software. For example the variability of the standoff is within 10 mm for the tool-paths created with the commercial software and within 4.5 mm for the RoboNDT tool-paths, over a scanned area of 1.6m². The output of this research was used to support a 3-year industrial project, called IntACom and led by TWI on behalf of major aerospace sponsors. The result is a demonstrator system, currently in use at TWI Technology Centre, which is capable of inspecting complex geometries with high throughput. The IntACom system can scan real components 2.8 times faster than traditional 3-DoF scanners deploying phased-array inspection and 6.7 times faster than commercial gantry systems deploying traditional single-element inspection

Inverse Kinematic Analysis of Robot Manipulators

An important part of industrial robot manipulators is to achieve desired position and orientation of end effector or tool so as to complete the pre-specified task. To achieve the above stated goal one should have the sound knowledge of inverse kinematic problem. The problem of getting inverse kinematic solution has been on the outline of various researchers and is deliberated as thorough researched and mature problem. There are many fields of applications of robot manipulators to execute the given tasks such as material handling, pick-n-place, planetary and undersea explorations, space manipulation, and hazardous field etc. Moreover, medical field robotics catches applications in rehabilitation and surgery that involve kinematic, dynamic and control operations. Therefore, industrial robot manipulators are required to have proper knowledge of its joint variables as well as understanding of kinematic parameters. The motion of the end effector or manipulator is controlled by their joint actuator and this produces the required motion in each joints. Therefore, the controller should always supply an accurate value of joint variables analogous to the end effector position. Even though industrial robots are in the advanced stage, some of the basic problems in kinematics are still unsolved and constitute an active focus for research. Among these unsolved problems, the direct kinematics problem for parallel mechanism and inverse kinematics for serial chains constitute a decent share of research domain. The forward kinematics of robot manipulator is simpler problem and it has unique or closed form solution. The forward kinematics can be given by the conversion of joint space to Cartesian space of the manipulator. On the other hand inverse kinematics can be determined by the conversion of Cartesian space to joint space. The inverse kinematic of the robot manipulator does not provide the closed form solution. Hence, industrial manipulator can achieve a desired task or end effector position in more than one configuration. Therefore, to achieve exact solution of the joint variables has been the main concern to the researchers. A brief introduction of industrial robot manipulators, evolution and classification is presented. The basic configurations of robot manipulator are demonstrated and their benefits and drawbacks are deliberated along with the applications. The difficulties to solve forward and inverse kinematics of robot manipulator are discussed and solution of inverse kinematic is introduced through conventional methods. In order to accomplish the desired objective of the work and attain the solution of inverse kinematic problem an efficient study of the existing tools and techniques has been done. A review of literature survey and various tools used to solve inverse kinematic problem on different aspects is discussed. The various approaches of inverse kinematic solution is categorized in four sections namely structural analysis of mechanism, conventional approaches, intelligence or soft computing approaches and optimization based approaches. A portion of important and more significant literatures are thoroughly discussed and brief investigation is made on conclusions and gaps with respect to the inverse kinematic solution of industrial robot manipulators. Based on the survey of tools and techniques used for the kinematic analysis the broad objective of the present research work is presented as; to carry out the kinematic analyses of different configurations of industrial robot manipulators. The mathematical modelling of selected robot manipulator using existing tools and techniques has to be made for the comparative study of proposed method. On the other hand, development of new algorithm and their mathematical modelling for the solution of inverse kinematic problem has to be made for the analysis of quality and efficiency of the obtained solutions. Therefore, the study of appropriate tools and techniques used for the solution of inverse kinematic problems and comparison with proposed method is considered. Moreover, recommendation of the appropriate method for the solution of inverse kinematic problem is presented in the work. Apart from the forward kinematic analysis, the inverse kinematic analysis is quite complex, due to its non-linear formulations and having multiple solutions. There is no unique solution for the inverse kinematics thus necessitating application of appropriate predictive models from the soft computing domain. Artificial neural network (ANN) can be gainfully used to yield the desired results. Therefore, in the present work several models of artificial neural network (ANN) are used for the solution of the inverse kinematic problem. This model of ANN does not rely on higher mathematical formulations and are adept to solve NP-hard, non-linear and higher degree of polynomial equations. Although intelligent approaches are not new in this field but some selected models of ANN and their hybridization has been presented for the comparative evaluation of inverse kinematic. The hybridization scheme of ANN and an investigation has been made on accuracies of adopted algorithms. On the other hand, any Optimization algorithms which are capable of solving various multimodal functions can be implemented to solve the inverse kinematic problem. To overcome the problem of conventional tool and intelligent based method the optimization based approach can be implemented. In general, the optimization based approaches are more stable and often converge to the global solution. The major problem of ANN based approaches are its slow convergence and often stuck in local optimum point. Therefore, in present work different optimization based approaches are considered. The formulation of the objective function and associated constrained are discussed thoroughly. The comparison of all adopted algorithms on the basis of number of solutions, mathematical operations and computational time has been presented. The thesis concludes the summary with contributions and scope of the future research work