PID control system analysis, design, and technology

Designing and tuning a proportional-integral-derivative (PID) controller appears to be conceptually intuitive, but can be hard in practice, if multiple (and often conflicting) objectives such as short transient and high stability are to be achieved. Usually, initial designs obtained by all means need to be adjusted repeatedly through computer simulations until the closed-loop system performs or compromises as desired. This stimulates the development of "intelligent" tools that can assist engineers to achieve the best overall PID control for the entire operating envelope. This development has further led to the incorporation of some advanced tuning algorithms into PID hardware modules. Corresponding to these developments, this paper presents a modern overview of functionalities and tuning methods in patents, software packages and commercial hardware modules. It is seen that many PID variants have been developed in order to improve transient performance, but standardising and modularising PID control are desired, although challenging. The inclusion of system identification and "intelligent" techniques in software based PID systems helps automate the entire design and tuning process to a useful degree. This should also assist future development of "plug-and-play" PID controllers that are widely applicable and can be set up easily and operate optimally for enhanced productivity, improved quality and reduced maintenance requirements

Optimisation of Mobile Communication Networks - OMCO NET

The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University. The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing

A Particle Swarm Optimization Technique used for the Improvement of Analogue Circuit Performances

International audienceno abstrac

Optimised configuration of sensing elements for control and fault tolerance applied to an electro-magnetic suspension system

New technological advances and the requirements to increasingly abide by new safety laws in engineering design projects highly affects industrial products in areas such as automotive, aerospace and railway industries. The necessity arises to design reduced-cost hi-tech products with minimal complexity, optimal performance, effective parameter robustness properties, and high reliability with fault tolerance. In this context the control system design plays an important role and the impact is crucial relative to the level of cost efficiency of a product. Measurement of required information for the operation of the design control system in any product is a vital issue, and in such cases a number of sensors can be available to select from in order to achieve the desired system properties. However, for a complex engineering system a manual procedure to select the best sensor set subject to the desired system properties can be very complicated, time consuming or even impossible to achieve. This is more evident in the case of large number of sensors and the requirement to comply with optimum performance. The thesis describes a comprehensive study of sensor selection for control and fault tolerance with the particular application of an ElectroMagnetic Levitation system (being an unstable, nonlinear, safety-critical system with non-trivial control performance requirements). The particular aim of the presented work is to identify effective sensor selection frameworks subject to given system properties for controlling (with a level of fault tolerance) the MagLev suspension system. A particular objective of the work is to identify the minimum possible sensors that can be used to cover multiple sensor faults, while maintaining optimum performance with the remaining sensors. The tools employed combine modern control strategies and multiobjective constraint optimisation (for tuning purposes) methods. An important part of the work is the design and construction of a 25kg MagLev suspension to be used for experimental verification of the proposed sensor selection frameworks

Automatic design of analogue circuits

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Evolvable Hardware (EHW) is a promising area in electronics today. Evolutionary Algorithms (EA), together with a circuit simulation tool or real hardware, automatically designs a circuit for a given problem. The circuits evolved may have unconventional designs and be less dependent on the personal knowledge of a designer. Nowadays, EA are represented by Genetic Algorithms (GA), Genetic Programming (GP) and Evolutionary Strategy (ES). While GA is definitely the most popular tool, GP has rapidly developed in recent years and is notable by its outstanding results. However, to date the use of ES for analogue circuit synthesis has been limited to a few applications. This work is devoted to exploring the potential of ES to create novel analogue designs. The narrative of the thesis starts with a framework of an ES-based system generating simple circuits, such as low pass filters. Then it continues with a step-by-step progression to increasingly sophisticated designs that require additional strength from the system. Finally, it describes the modernization of the system using novel techniques that enable the synthesis of complex multi-pin circuits that are newly evolved. It has been discovered that ES has strong power to synthesize analogue circuits. The circuits evolved in the first part of the thesis exceed similar results made previously using other techniques in a component economy, in the better functioning of the evolved circuits and in the computing power spent to reach the results. The target circuits for evolution in the second half are chosen by the author to challenge the capability of the developed system. By functioning, they do not belong to the conventional analogue domain but to applications that are usually adopted by digital circuits. To solve the design tasks, the system has been gradually developed to support the ability of evolving increasingly complex circuits. As a final result, a state-of-the-art ES-based system has been developed that possesses a novel mutation paradigm, with an ability to create, store and reuse substructures, to adapt the mutation, selection parameters and population size, utilize automatic incremental evolution and use the power of parallel computing. It has been discovered that with the ability to synthesis the most up-to-date multi-pin complex analogue circuits that have ever been automatically synthesized before, the system is capable of synthesizing circuits that are problematic for conventional design with application domains that lay beyond the conventional application domain for analogue circuits

A Novel Fractional Order Fuzzy PID Controller and Its Optimal Time Domain Tuning Based on Integral Performance Indices

A novel fractional order (FO) fuzzy Proportional-Integral-Derivative (PID) controller has been proposed in this paper which works on the closed loop error and its fractional derivative as the input and has a fractional integrator in its output. The fractional order differ-integrations in the proposed fuzzy logic controller (FLC) are kept as design variables along with the input-output scaling factors (SF) and are optimized with Genetic Algorithm (GA) while minimizing several integral error indices along with the control signal as the objective function. Simulations studies are carried out to control a delayed nonlinear process and an open loop unstable process with time delay. The closed loop performances and controller efforts in each case are compared with conventional PID, fuzzy PID and PI{\lambda}D{\mu} controller subjected to different integral performance indices. Simulation results show that the proposed fractional order fuzzy PID controller outperforms the others in most cases.Comment: 30 pages, 20 figure