An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control

This paper describes the preliminary research and implementation of an experimental test bench set up for an electric vehicle antilock braking system (ABS)/traction control system (TCS) representing the dry, wet and icy road surfaces. A fuzzy logic based controller to control the wheel slip for electric vehicle antilock braking system is presented. The test facility comprised of an induction machine load operating in the generating region. The test facility was used to simulate a variety of tire/road μ-σ driving conditions, eliminating the initial requirement for skid-pan trials when developing algorithms. Simulation studies and results are provided

Modelling of automatic car braking system using fuzzy logic controller

The increasing rate of road accident is alarming and any vehicle without an effective brake system is prone to accident with apparently disastrous effect following. This is due to human errors in driving which involves reaction time delays and distraction. Automatic braking system will be developed to keep the vehicle steerable and stable and also prevent wheel lock and collision with an obstacle. The objectives of this study are to: design an obstacle detection model using ultrasonic sensors, model an antilock braking system, develop fuzzy logic rules for both detection and antilock braking system, and simulate the developed model using Simulink in MATLAB software to achieve high braking torque, optimal slip ratio and shorter stopping distance and time. The results show 22% improvement in braking torque thereby giving a shorter stopping time and distance when compared to the normal PID control.Keywords: Slip ratio, Model, Ultrasonic Sensor, Antilock Braking System, Fuzzy logic, wheel loc

Antilock braking control using robust control approach

The aims of this study are to establish the mathematical model and the robust control technique for an Antilock Braking System (ABS). The ABS have been developed to reduce tendency of wheel lock up and to improve vehicle control during sudden braking. The ABS work by maintaining the wheel slip to a desired level so that maximum tractive force and maximum vehicle deceleration is obtained, thus reducing the vehicle stopping distance. A quarter vehicle model undergoing straightline braking maneuver, tire dynamics and hydraulic brake dynamics mathematical model are developed to represent the ABS model. The established mathematical model shows the ABS dynamics exhibits strong nonlinear characteristics. Thus, Sliding Mode Control which is a robust control technique is proposed in this study to regulate the wheel slip at the desired value depending on the road surface. The mathematical derivations proved the designed controller satisfy the stability requirement. Extensive simulation study is performed to verify the effectiveness of the designed controller and the result shows the designed controller able to maintain the wheel slip at the desired value and reducing the stopping distanc

Integration of torque blending and slip control using nonlinear model predictive control

Antilock Braking System (ABS) is an important active safety feature in preventing accidents during emergency braking. Electrified vehicles which include both hydraulic and regenerative braking systems provide the opportunity to implement brake torque blending during slip control operation. This study evaluates the design and implementation of a new torque allocation algorithm using a Nonlinear Model Predictive Control (NMPC) strategy that can run in real-time, with results showing that wheel-locking can be prevented while also permitting for energy recuperation

Identification of Intelligent Controls in Developing Antilock Braking System

This paper presents about the development of an Antilock Braking System (ABS) using quarter vehicle model and a control structure is developed to represents an ABS and conventional braking model. Different type of controllers is proposed to develop the ABS model. Antilock braking system (ABS) is an important part in vehicle system to produce additional safety for driver. This system is known as one of the automobile’s active safety. In general, Antilock braking systems have been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking especially on slippery road surfaces. In this paper, to deal with the strong nonlinearity in the design of ABS controller, an intelligent controller has been identified. The controllers such as PID and Fuzzy Logic are proposed to control the stopping distance and longitudinal slip of the wheel. Comparison results between these two controllers generated using Matlab SIMULINK

Application of Fuzzy control algorithms for electric vehicle antilock braking/traction control systems

Abstract—The application of fuzzy-based control strategies has recently gained enormous recognition as an approach for the rapid development of effective controllers for nonlinear time-variant systems. This paper describes the preliminary research and implementation of a fuzzy logic based controller to control the wheel slip for electric vehicle antilock braking systems (ABSs). As the dynamics of the braking systems are highly nonlinear and time variant, fuzzy control offers potential as an important tool for development of robust traction control. Simulation studies are employed to derive an initial rule base that is then tested on an experimental test facility representing the dynamics of a braking system. The test facility is composed of an induction machine load operating in the generating region. It is shown that the torque-slip characteristics of an induction motor provides a convenient platform for simulating a variety of tire/road - driving conditions, negating the initial requirement for skid-pan trials when developing algorithms. The fuzzy membership functions were subsequently refined by analysis of the data acquired from the test facility while simulating operation at a high coefficient of friction. The robustness of the fuzzy-logic slip regulator is further tested by applying the resulting controller over a wide range of operating conditions. The results indicate that ABS/traction control may substantially improve longitudinal performance and offer significant potential for optimal control of driven wheels, especially under icy conditions where classical ABS/traction control schemes are constrained to operate very conservatively

Dynamic Control Applied to a Laboratory Antilock Braking System

The control of an antilock braking system is a difficult problem due to the existence of nonlinear dynamics and uncertainties of its characteristics. To overcome these issues, in this work, a dynamic nonlinear controller is proposed, based on a nonlinear observer. To evaluate its performance, this controller has been implemented on an ABS Laboratory setup, representing a quarter car model. The nonlinear observer reconstructs some of the state variables of the setup, assumed not measurable, to establish a fair benchmark for an ABS system of a real automobile. The dynamic controller ensures exponential convergence of the state estimation, as well as robustness with respect to parameter variations

A Modified HOSM Controller Applied to an ABS Laboratory Setup with Adaptive Parameter

The antilock braking system (ABS) is an electromechanical device whose controller is challenging to design because of its nonlinear dynamics and parameter uncertainties. In this paper, an adaptive controller is considered under the assumption that the friction coefficient is unknown. A modified high-order sliding-mode controller is designed to enhance the controller performance. The controller ensures tracking of the desired reference and identifies the unknown parameter, despite parametric variations acting on the real system. The stability proof is done using the Lyapunov approach. Some numerical and experimental tests evaluate the controller on a mechatronic system that represents a quarter-car model