Energy Efficiency and Differentiated QoS in Next Generation PONs

Energy conservation in next generation Passive Optical Network system (NG-PON) has gained more and more attention. NG-PON system can not only deliver best-effort data traffic, but also real-time data traffic, e.g. voice and video, that have strict bandwidth, delay, and jitter requirements. To meet the energy and service requirements, a NG-PON system must have energy efficiency and differentiated QoS mechanism built in. Few research efforts have been reported on maximizing energy efficiency while maintaining QoS in the fairly new PON system design. We have extended the Upstream Centric Scheme (UCS-based) scheduling scheme idea into a novel QoS-differentiated energy-efficient PON system consisting of two main modules: firstly, the proposed differentiated QoS analytical model is described in detail to reduce the packet delay in the upstream traffic scheduling. The simulations further demonstrate the QoS metrics of the system: packet delay, bandwidth utilization, dropped packet rate, and queue length. Secondly, a novel analysis is proposed for downstream traffic scheduling with limited service discipline at Optical Line Terminal (OLT) side under the UCS-based Green Bandwidth Allocation (GBA) framework. We, first, derive the mean packet delay expression of this model. Then, the sleep time for each Optical Network Unit (ONU) is derived by setting identical upstream/downstream transmission cycle time. Based on the analytical model, an approach is developed to save the maximum energy in a dynamic PON system while without violating the delay requirement. Moreover, simulation is conducted to verify the developed analytical model and the proposed approach. In the end, considering the differentiated QoS and downstream traffic scheduling, an algorithm of the energy efficient scheduling scheme is proposed as well under the UCS-based GBA

Energy Conservation in Passive Optical Networks: A Tutorial and Survey

The Passive Optical Network (PON) has been evolving continuously in terms of architecture and capacity to keep up with the demand for high-speed Internet access in the access network segment. Recently, integration of Software-Defined Networking (SDN), which provides programmable and (logically) centralized network control, with PON has attracted intensive research interest to further enhance PON performance and reduce operational and capital expenditure. Although PON is regarded as an energy-efficient a ccess n etwork s olution, it is a major contributor for increasing energy consumption in the access network segment because of its higher penetration rate than other access network technologies. Over the past several years, the major standardization bodies like IEEE and research communities have engaged in introducing energy-efficient PON solutions. This article familiarizes readers with PON evolution in terms of capacity, architecture, and its integration with virtualization and SDN based control. We present a comprehensive survey of the energy conservation research efforts in PON starting from conventional PON to SDN based PON leveraging virtual and physical network functions. This article also presents contemporary energy-efficient standardization activities in IEEE and ITU. To the best of our knowledge, to date, this article is the first most comprehensive survey on energy saving research and standardization on PON. We summarize the lessons learned from the recent advancements, identify important challenges ahead and outline several future research directions that can contribute to further advancement of energy-efficient PON

Design and Analysis of Green Mission-Critical Fiber-Wireless Broadband Access Networks

In recent years, the ever-increasing environmental friendliness concern has made energy efficiency in telecom networks as an important theme in their operations. Meanwhile, mission-critical (MC) services and systems (such as healthcare, police, and firefighting) have been acquiring special attention from telecom designers and operators. The currently deployed MC network technologies are indigent in terms of bandwidth capacity, and thus they are not able to support the emerging MC multimedia applications. Therefore in this thesis, we first explore the possibility of provisioning the MC services over the integration of fiber-wireless (FiWi) technologies, which has been considered as a promising candidate for the deployment of high-speed and mobile broadband access networks. We then investigate the energy efficiency problem in the FiWi integration, which consists of WiMAX in the wireless plane, and of Ethernet Passive Optical Network (EPON) - the most popular variant of the next-generation PON (NG-PON) technology, in the optical plane. In WiMAX, the energy saving protocol has been extensively investigated and standardized. Conversely, it has been recently studied in NG-PON, which currently consumes the least power among all the high-speed access networks. However, NG-PON has notably matured in the past few years and is envisioned to massively evolve in the near future. This trend will increase the power requirements of NG-PON and make it no longer coveted. Therefore we address the energy efficiency problem in NG-PON. For each of our contributions, we conduct extensive simulations to demonstrate the effectiveness and advantages of the proposed solutions

A low-energy rate-adaptive bit-interleaved passive optical network

Energy consumption of customer premises equipment (CPE) has become a serious issue in the new generations of time-division multiplexing passive optical networks, which operate at 10 Gb/s or higher. It is becoming a major factor in global network energy consumption, and it poses problems during emergencies when CPE is battery-operated. In this paper, a low-energy passive optical network (PON) that uses a novel bit-interleaving downstream protocol is proposed. The details about the network architecture, protocol, and the key enabling implementation aspects, including dynamic traffic interleaving, rate-adaptive descrambling of decimated traffic, and the design and implementation of a downsampling clock and data recovery circuit, are described. The proposed concept is shown to reduce the energy consumption for protocol processing by a factor of 30. A detailed analysis of the energy consumption in the CPE shows that the interleaving protocol reduces the total energy consumption of the CPE significantly in comparison to the standard 10 Gb/s PON CPE. Experimental results obtained from measurements on the implemented CPE prototype confirm that the CPE consumes significantly less energy than the standard 10 Gb/s PON CPE

Allocation des ressources et des solutions pour économiser de l'énergie dans les réseaux optiques d'accès

In this thesis, general overview about PON systems is presented and existing PON mechanisms and classification are investigated. After, a novel dynamic bandwidth allocation algorithm for EPON is introduced. This proposed algorithm is named as “Half Cycling Dynamic Bandwidth Allocation-hcDBA” by the inspiration of its half cycling processing mode. Later, an improvement of hcDBA algorithm with early prediction mechanism is presented. As a result statement of the study, hcDBA algorithm performs better than existing mechanism in terms of packet loss ratio and access delays. Beside, simulation traffic behavior of EPON’s upstream channel has been investigated in order to support the decision of selecting suitable traffic generator in further studies. Energy conversation is one of the hot topics in telecommunication networks. Access networks constitute remarkable portion of the total energy consumption in telecommunication networks. ITU-T and IEEE organizations published recommendation for energy conversation in PONs. While, total energy consumption of ONUs is more than other equipment in fix access network the standards and most of the researches focused on saving energy at ONU side. In this thesis I focused on an energy efficiency method based on energy conversation on OLT side. The proposed method save energy by dynamically moving OLT cards to deep sleep mode according to the incoming and outgoing traffic loadsDans ce travail de thèse, un aperçu général sur les systèmes PON est présenté et sont étudiés les mécanismes et classification PON existants. Après, nous introduisons notre première contribution qui est un algorithme d'allocation dynamique de bande passante pour EPON. Cet algorithme proposé est désigné comme «hcDBA». Par la suite, une amélioration de l'algorithme de hcDBA avec mécanisme de prédiction précoce est présentée. Notre simulation montre bien que notre algorithme hcDBA est performant comparé aux mécanismes existants en termes de taux de perte de paquets et de délai d’accès. Dans notre seconde contribution, nous sommes intéressés au problème de consommation d’énergie qui est un sujet d’actualité dans les réseaux de télécommunication. Les études montrent aujourd’hui que les réseaux d'accès constituent une partie remarquable de la consommation totale d'énergie dans les réseaux de télécommunication. Les organisations ITU-T et IEEE ont publié la recommandation pour la conversation de l'énergie pour les réseaux PONs. Bien que, la consommation totale d'énergie des nœuds ONU est plus importantes que d'autres équipements dans le réseau d'accès fixe, les normes et la plupart des travaux de recherches ont porté sur les économies d'énergie du côté de ONU. Dans cette thèse, nous sommes concentrés sur une méthode d'efficacité énergétique basée sur la conservation de l'énergie du côté de l’OLT. La méthode proposée permet d’économiser de l'énergie en déplaçant dynamiquement des cartes d’OLT en mode de sommeil profond en fonction des charges de trafic entrant et sortan

Green radio communication networks applying radio-over-fibre technology for wireless access

Wireless communication increasingly is becoming the first choice link to enter into the global information society. It is an essential part of broadband communication networks, due to its capacity to cover the end-user domain, outdoors or indoors. The use of mobile phones and broadband has already exceeded the one of the fixed telephones and has caused tremendous changes in peoples life, as not only to be recognised in the current political overthrows. The all-around presence of wireless communication links combined with functions that support mobility will make a roaming person-bound communication network possible in the near future. This idea of a personal network, in which a user has his own communication environment available everywhere, necessitates immense numbers of radio access points to maintain the wireless links and support mobility. The progress towards “all-around wireless” needs budget and easily maintainable radio access points, with simplified signal processing and consolidation of the radio network functions in a central station. The RF energy consumption in mobile base stations is one of the main problems in the wireless communication system, which has led to the worldwide research in so called green communication, which offers an environmentally friendly and cost-effective solution. In order to extend networks and mobility support, the simplification of antenna stations and broadband communication capacity becomes an increasingly urgent demand, also the extension of the wireless signal transmission distance to consolidate the signal processing in a centralised site. Radio-over-Fibre technology (RoF) was considered and found to be the most promising solution to achieve effective delivery of wireless and baseband signals, also to reduce RF energy consumption. The overall aim of this research project was to simulate the transmission of wireless and baseband RF signals via fibre for a long distance in high quality, consuming a low-power budget. Therefore, this thesis demonstrated a green radio communication network and the advantage of transmitting signals via fibre rather than via air. The contributions of this research work were described in the follows: Firstly, a comparison of the power consumption in WiMAX via air and fibre is presented. As shown in the simulation results, the power budget for the transmission of 64 QAM WiMAX IEEE 802.16-2005 via air for a distance of 5km lies at -189.67 dB, whereas for the transmission via RoF for a distance of 140km, the power consumption ranges at 65dB. Through the deployment of a triple symmetrical compensator technique, consisting of SMF, DCF and FBG, the transmission distance of the 54 Mbps WiMAX signal can be increased to 410km without increasing the power budget of 65dB. An amendment of the triple compensator technique to SMF, DCF and CFBG allows a 120Mbps WiMAX signal transmission with a clear RF spectrum of 3.5 GHz and constellation diagram over a fibre length of 792km using a power budget of 192dB. Secondly, the thesis demonstrates a simulation setup for the deployment of more than one wireless system, namely 64 QAM WiMAX IEEE 802.16-2005 and LTE, for a data bit rate of 1Gbps via Wavelength Division Multiplexing (WDM) RoF over a transmission distance of 1800km. The RoF system includes two triple symmetrical compensator techniques - DCF, SMF, and CFBG - to obtain a large bandwidth, power budget of 393.6dB and a high signal quality for the long transmission distance. Finally, the thesis proposed a high data bit rate and energy efficient simulation architecture, applying a passive optical component for a transmission span up to 600km. A Gigabit Optical Passive Network (GPON) based on RoF downlink 2.5 Gbps and uplink 1.25Gbps is employed to carry LTE and WiMAX, also 18 digital channels by utilising Coarse Wavelength Division Multiplexing (CWDM). The setup achieved high data speed, a low-power budget of 151.2dB, and an increased service length of up to 600km