Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

Engine performance characteristics and evaluation of variation in the length of intake plenum

In the engine with multipoint fuel injection system using electronically controlled fuel injectors has an intake manifold in which only the air flows and, the fuel is injected into the intake valve. Since the intake manifolds transport mainly air, the supercharging effects of the variable length intake plenum will be different from carbureted engine. Engine tests have been carried out with the aim of constituting a base study to design a new variable length intake manifold plenum. The objective in this research is to study the engine performance characteristics and to evaluate the effects of the variation in the length of intake plenum. The engine test bed used for experimental work consists of a control panel, a hydraulic dynamometer and measurement instruments to measure the parameters of engine performance characteristics. The control panel is being used to perform administrative and management operating system. Besides that, the hydraulic dynamometer was used to measure the power of an engine by using a cell filled with liquid to increase its load. Thus, measurement instrument is provided in this test to measure the as brake torque, brake power, thermal efficiency and specific fuel consumption. The results showed that the variation in the plenum length causes an improvement on the engine performance characteristics especially on the fuel consumption at high load and low engine speeds which are put forward the system using for urban roads. From this experiment, it will show the behavior of engine performance

Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications

Indoor radio channel of bluetooth technology

This thesis discusses the findings of the final year project involving the characterisation of indoor radio channel specified by Bluetooth technology through theoretical analysis, simulations and actual measurements through field experiments. The concepts of indoor radio propagation effects and its statistical models arc explored. In addition, Bluetooth specifications are also studied and presented in Section 1. These provided a clear understanding of the radio propagation behaviour inside a building and the radio performance of Bluetooth specifications. Profound understanding of the propagation characteristics of the indoor radio channel is a major requirement for successful design of any indoor wireless communication systems. The knowledge is used here to investigate Bluetooth radio performance. Detailed characterisation of indoor radio channel is studied and presented in section 2. Path loss model and amplitude fading model are used in the theoretical analysis, simulations and field experiments have been done to characterise the indoor channel. Field experiments and its measurements were performed and recorded to verify against the simulated results. Attenuation factor of various materials were measured since it is a critical component effecting the path loss calculation. These are presented in section 3

Tracking Infected Covid-19 Persons and their Proximity Users Using D2D in 5G Networks

The world witnessed a pandemic that needs to be limited. COVID-19 is a disease that spreads among people when an infected person is in close contact with another. To decrease the virus spreading, World Health Organization (WHO) imposed precautionary measures and suggested some rules to be followed such as social distancing and quarantining the infected people. We propose a model, using D2D and IoT technology, for tracking infected persons with COVID-19 and its proximity. If a person (mobile device) gets close to an infected person, he will also get infected, so by continuous moving, the infection will be transmitted. Thus, identifying the infected persons and their contacts will limit the spread of the disease. In each scenario, it is possible to distinguish the number of infected people and know from whom they are infected, and the location of the infection. The simulation shows the tracking of a mobile device when proximate infected person at a distance of 3 meters. As a result, our proposed D2D model is effective, especially in the scenario which found the infected person with COVID-19, tracks them, determines minimum distances, and recognizes the source of the infection. Thus, the model can limit the rapid spread of COVID-19 as it determines the 3meters distance from infected person and send precaution messages to the network

RFID Localisation For Internet Of Things Smart Homes: A Survey

The Internet of Things (IoT) enables numerous business opportunities in fields as diverse as e-health, smart cities, smart homes, among many others. The IoT incorporates multiple long-range, short-range, and personal area wireless networks and technologies into the designs of IoT applications. Localisation in indoor positioning systems plays an important role in the IoT. Location Based IoT applications range from tracking objects and people in real-time, assets management, agriculture, assisted monitoring technologies for healthcare, and smart homes, to name a few. Radio Frequency based systems for indoor positioning such as Radio Frequency Identification (RFID) is a key enabler technology for the IoT due to its costeffective, high readability rates, automatic identification and, importantly, its energy efficiency characteristic. This paper reviews the state-of-the-art RFID technologies in IoT Smart Homes applications. It presents several comparable studies of RFID based projects in smart homes and discusses the applications, techniques, algorithms, and challenges of adopting RFID technologies in IoT smart home systems.Comment: 18 pages, 2 figures, 3 table

Quality assessment technique for ubiquitous software and middleware

The new paradigm of computing or information systems is ubiquitous computing systems. The technology-oriented issues of ubiquitous computing systems have made researchers pay much attention to the feasibility study of the technologies rather than building quality assurance indices or guidelines. In this context, measuring quality is the key to developing high-quality ubiquitous computing products. For this reason, various quality models have been defined, adopted and enhanced over the years, for example, the need for one recognised standard quality model (ISO/IEC 9126) is the result of a consensus for a software quality model on three levels: characteristics, sub-characteristics, and metrics. However, it is very much unlikely that this scheme will be directly applicable to ubiquitous computing environments which are considerably different to conventional software, trailing a big concern which is being given to reformulate existing methods, and especially to elaborate new assessment techniques for ubiquitous computing environments. This paper selects appropriate quality characteristics for the ubiquitous computing environment, which can be used as the quality target for both ubiquitous computing product evaluation processes ad development processes. Further, each of the quality characteristics has been expanded with evaluation questions and metrics, in some cases with measures. In addition, this quality model has been applied to the industrial setting of the ubiquitous computing environment. These have revealed that while the approach was sound, there are some parts to be more developed in the future