Modelling and analysis of crosstalk in scaled CMOS interconnects

The development of a general coupled RLC interconnect model for simulating scaled bus structures m VLSI is presented. Several different methods for extracting submicron resistance, inductance and capacitance parameters are documented. Realistic scaling dimensions for deep submicron design rules are derived and used within the model. Deep submicron HSPICE device models are derived through the use of constant-voltage scaling theory on existing 0.75µm and 1.0µm models to create accurate interconnect bus drivers. This complete model is then used to analyse crosstalk noise and delay effects on multiple scaling levels to determine the dependence of crosstalk on scaling level. Using this data, layout techniques and processing methods are suggested to reduce crosstalk in system

Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects

Siirretty Doriast

A study of microwave downcoverters operating in the K sub u band

A computer program for parametric amplifier design is developed with special emphasis on practical design considerations for microwave integrated circuit degenerate amplifiers. Precision measurement techniques are developed to obtain a more realistic varactor equivalent circuit. The existing theory of a parametric amplifier is modified to include the equivalent circuit, and microwave properties, such as loss characteristics and circuit discontinuities are investigated

Laminated ferrite memory system

Feasibility study of random access laminated ferrite memory system for spacecraft us

Microelectronic device data handbook. Volume 1 - Text

Microelectronic device data handbook /text

NASA Space Engineering Research Center Symposium on VLSI Design

The NASA Space Engineering Research Center (SERC) is proud to offer, at its second symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories and the electronics industry. These featured speakers share insights into next generation advances that will serve as a basis for future VLSI design. Questions of reliability in the space environment along with new directions in CAD and design are addressed by the featured speakers

Nd:YAG development for spaceborne laser ranging system

The results of the development of a unique modelocked laser device to be utilized in future NASA space-based, ultraprecision laser ranger systems are summarized. The engineering breadboard constructed proved the feasibility of the pump-pulsed, actively modelocked, PTM Q-switched Nd:YAG laser concept for the generation of subnanosecond pulses suitable for ultra-precision ranging. The laser breadboard also included a double-pass Nd:YAG amplifier and provision for a Type II KD*P frequency doubler. The specific technical accomplishment was the generation of single 150 psec, 20-mJ pulses at 10 pps at a wavelength of 1.064 micrometers with 25 dB suppression of pre-and post-pulses

Analyse et caractérisation des couplages substrat et de la connectique dans les circuits 3D : Vers des modèles compacts

The 3D integration is the most promising technological solution to track the level of integration dictated by Moore's Law (see more than Moore, Moore versus more). It leads to important research for a dozen years. It can superimpose different circuits and components in one box. Its main advantage is to allow a combination of heterogeneous and highly specialized technologies for the establishment of a complete system, while maintaining a high level of performance with very short connections between the different circuits. The objective of this work is to provide consistent modeling via crossing, and / or contacts in the substrate, with various degrees of finesse / precision to allow the high-level designer to manage and especially to optimize the partitioning between the different strata. This modelization involves the development of multiple views at different levels of abstraction: the physical model to "high level" model. This would allow to address various issues faced in the design process: - The physical model using an electromagnetic simulation based on 2D or 3D ( finite element solver ) is used to optimize the via (materials, dimensions etc..) It determines the electrical performance of the via, including high frequency. Electromagnetic simulations also quantify the coupling between adjacent via. - The analytical compact of via their coupling model, based on a description of transmission line or Green cores is used for the simulations at the block level and Spice type simulations. Analytical models are often validated against measurements and / or physical models.L’intégration 3D est la solution technologique la plus prometteuse pour suivre le niveau d’intégration dictée par la loi de Moore (cf. more than Moore, versus more Moore). Elle entraine des travaux de recherche importants depuis une douzaine d’années. Elle permet de superposer différents circuits et composants dans un seul boitier. Son principal avantage est de permettre une association de technologies hétérogènes et très spécialisées pour la constitution d’un système complet, tout en préservant un très haut niveau de performance grâce à des connexions très courtes entre ces différents circuits. L’objectif de ce travail est de fournir des modélisations cohérentes de via traversant, ou/et de contacts dans le substrat, avec plusieurs degrés de finesse/précision, pour permettre au concepteur de haut niveau de gérer et surtout d’optimiser le partitionnement entre les différentes strates. Cette modélisation passe par le développement de plusieurs vues à différents niveaux d’abstraction: du modèle physique au modèle « haut niveau ». Elle devait permettre de répondre à différentes questions rencontrées dans le processus de conception :- le modèle physique de via basé sur une simulation électromagnétique 2D ou 3D (solveur « éléments finis ») est utilisé pour optimiser l’architecture du via (matériaux, dimensions etc.) Il permet de déterminer les performances électriques des via, notamment en haute fréquence. Les simulations électromagnétiques permettent également de quantifier le couplage entre via adjacents. - le modèle compact analytique de via et de leur couplage, basé sur une description de type ligne de transmission ou noyaux de Green, est utilisé pour les simulations au niveau bloc, ainsi que des simulations de type Spice. Les modèles analytiques sont souvent validés par rapport à des mesures et/ou des modèles physiques

High-speed low-power modulator driver arrays for medium-reach optical networks

The internet is becoming the ubiquitous tool that is changing the lives of so many citizens across the world. Commerce, government, industry, healthcare and social interactions are all increasingly using internet applications to improve and facilitate communications. This is especially true for videoenabled applications, which currently demand much higher data rates and quality from data networks. High definition TV streaming services are emerging and these again will significantly push the demand for widely deployed, high-bandwidth services. The current access passive optical networks (PONs) use a single wavelength for downstream transmission and a separate one for upstream transmission. Incorporating wavelength-division multiplexing (WDM) in a PON allows for much higher bandwidths in both directions. While WDM technologies have been successfully deployed for many years in metro and core networks, in access networks they are not commonly used yet. This is mainly due to the high costs associated with deploying entire WDM access networks. However, the present optical networks cannot be simply and cost-effectively scaled to provide the capacity for tomorrow’s users. As an effect there is a strong need for new WDM access components which are compact, cost-competitive and mass-manufacturable. Increasing the number of wavelengths for WDM-PON automatically leads to an increase in the number of single pluggable transceivers, which brings substantial design challenges and additional costs. The multitude of TXs and RXs for different wavelength channels increases the total footprint considerably. Photonic integration of transceivers into arrays will significantly reduce the footprint and cost. However, the total power consumption of an array device is an issue. To avoid the use of a thermoelectric cooler, the integration density of components is severely limited by the heat dissipating capabilities offered by their package. As a result the WDM-PON philosophy necessitates the reduction of the transceiver’s power dissipation. From this plea it is apparent that the main technology challenges for realizing future-proof optical (access) networks are reducing active component power consumption, shrinking form factors and lowering assembly costs. In this perspective an over 100 Gb/s throughput component, composed of 10 channels at 11.3 Gb/s per wavelength channel would be a great contribution to the expansion of customer bandwidth. It can provide increased line rates to the end users at speeds of 10 Gb/s per wavelength. As RXs typically consume much less power than externally modulated TXs, they can relatively easily be integrated into an array. Mainly high speed optical transmitters have significant power consumptions and the heat generation caused by power dissipation forms a critical obstacle in the development of a 10-channel transmitter, which again underlines the importance of power reduction. Alongside the introduction of WDM in access networks, also inter-office point-to-point connections in data center environments could benefit from the WDM philosophy. As data center operators often suffer from fiber scarcity or do not own their fiber infrastructure, WDM technologies are essential to deliver reach and capacity extension for these scenarios. Interdata center communication also benefits from cost-, footprint- and energyefficient components operating at high speed to maximize the throughput. As an effect integrated over 100 Gb/s transceivers, such as 4 channels at 28 Gb/s, are highly desirable. The research described in this dissertation was partly funded by the European FP7 ICT project C3PO (Colourless and Coolerless Components for low Power Optical Networks) and the UGent special research fund. The C3PO project aimed to develop a new generation of green Si-photonic compatible components with record low power consumption, that can enable bandwidth growth and constrain the total cost. C3PO envisioned building high-capacity access networks employing reflective photonic components. To achieve this, cost-competitive reflective transmitters based on electroabsorption modulators (EAM) needed to be closely integrated into arrays. A multi-wavelength optical source provides the required wavelength channels for both downstream and upstream signals in the WDM-PON. Chapter 1 gives a short overview of a PON and describes the main implementations of a WDM-PON access network. It introduces integrated low power transmitter arrays for a cost-effective architecture of WDM-PONs and inter-data center communication. Chapter 2 compares different optical transmitters and gives a short overview of their most important characteristics. External modulation through both Mach-Zehnder modulators (MZMs) and EAMs is described. It shows that EAMs are the best choice for low power transmitter array integration, thanks to their lower drive voltage and smaller form factor, compared to MZMs. To achieve a reduced consumption, the electronic modulator driver topology is studied in chapter 3. The challenge in designing modulator drivers is the need to deliver very large currents in combination with high voltage swings. Four distinct output configurations are compared and techniques to reduce the power consumption of the drivers are described. Chapter 5 presents duobinary (DB), a modulation scheme that is gaining interest in today’s optical transmission. As the required bandwidth is about half that of NRZ, it softens the constraints on the transmitter bandwidth. Thanks to its narrow optical spectrum, it has an improved tolerance to dispersion in long haul single mode links and it can improve the spectral efficiency in WDM architectures. For optical DB a precoder is necessary to assure the received signal is equal to the original binary signal. The conducted research that resulted in this dissertation produced 2 low power EAM driver arrays: A 10-channel 113 Gb/s modulator driver array with state-of-the art ultra-low power consumption. A 2-channel 56 Gb/s duobinary driver array with a differential output with low power consumption. Both designs are elaborately analyzed in chapter 4 and 6 respectively. To the best of our knowledge the 10-channel EAM driver array is the first in its kind, while achieving the lowest power consumption for an EAM driver so far reported, 50% below the state of the art in power consumption. The 2-channel EAM driver array is the fastest modulator driver including on-chip duobinary encoding and precoding reported so far. The final chapter provides an overview of the foremost conclusions from the presented research. It is concluded with suggestions for further research