Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

Parallel H.264/AVC Fast Rate-Distortion Optimized Motion Estimation using Graphics Processing Unit and Dedicated Hardware

Heterogeneous systems on a single chip composed of CPU, Graphical Processing Unit (GPU), and Field Programmable Gate Array (FPGA) are expected to emerge in near future. In this context, the System on Chip (SoC) can be dynamically adapted to employ different architectures for execution of data-intensive applications. Motion estimation is one such task that can be accelerated using FPGA and GPU for high performance H.264/AVC encoder implementation. In most of works on parallel implementation of motion estimation, the bit rate cost of motion vectors is generally ignored. On the contrary, this paper presents a fast rate-distortion optimized parallel motion estimation algorithm implemented on GPU using OpenCL and FPGA/ASIC using VHDL. The predicted motion vectors are estimated from temporally preceding motion vectors and used for evaluating the bit rate cost of the motion vectors simultaneously. The experimental results show that the proposed scheme achieves significant speedup on GPU and FPGA, and has comparable ratedistortion performance with respect to sequential fast motion estimation algorithm

Parallelism and the software-hardware interface in embedded systems

This thesis by publications addresses issues in the architecture and microarchitecture of next generation, high performance streaming Systems-on-Chip through quantifying the most important forms of parallelism in current and emerging embedded system workloads. The work consists of three major research tracks, relating to data level parallelism, thread level parallelism and the software-hardware interface which together reflect the research interests of the author as they have been formed in the last nine years. Published works confirm that parallelism at the data level is widely accepted as the most important performance leverage for the efficient execution of embedded media and telecom applications and has been exploited via a number of approaches the most efficient being vectorlSIMD architectures. A further, complementary and substantial form of parallelism exists at the thread level but this has not been researched to the same extent in the context of embedded workloads. For the efficient execution of such applications, exploitation of both forms of parallelism is of paramount importance. This calls for a new architectural approach in the software-hardware interface as its rigidity, manifested in all desktop-based and the majority of embedded CPU's, directly affects the performance ofvectorized, threaded codes. The author advocates a holistic, mature approach where parallelism is extracted via automatic means while at the same time, the traditionally rigid hardware-software interface is optimized to match the temporal and spatial behaviour of the embedded workload. This ultimate goal calls for the precise study of these forms of parallelism for a number of applications executing on theoretical models such as instruction set simulators and parallel RAM machines as well as the development of highly parametric microarchitectural frameworks to encapSUlate that functionality.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Architectures for Adaptive Low-Power Embedded Multimedia Systems

This Ph.D. thesis describes novel hardware/software architectures for adaptive low-power embedded multimedia systems. Novel techniques for run-time adaptive energy management are proposed, such that both HW & SW adapt together to react to the unpredictable scenarios. A complete power-aware H.264 video encoder was developed. Comparison with state-of-the-art demonstrates significant energy savings while meeting the performance constraint and keeping the video quality degradation unnoticeable

Multimedia delivery in the future internet

The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio and video are produced, distributed, shared, managed and consumed on-line through various networks, like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked challenges of the Networked Media in the transition to the Future of the Internet. Internet has evolved and changed the way we work and live. End users of the Internet have been confronted with a bewildering range of media, services and applications and of technological innovations concerning media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged that in a near- to mid-term future, the Internet will provide the means to share and distribute (new) multimedia content and services with superior quality and striking flexibility, in a trusted and personalized way, improving citizens’ quality of life, working conditions, edutainment and safety. In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and innovative applications “on the move”, like virtual collaboration environments, personalised services/ media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to contribute towards such a vision. Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6) and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way ahead in the area of Content Aware media delivery platforms

A reduced reference video quality assessment method for provision as a service over SDN/NFV-enabled networks

139 p.The proliferation of multimedia applications and services has generarted a noteworthy upsurge in network traffic regarding video content and has created the need for trustworthy service quality assessment methods. Currently, predominent position among the technological trends in telecommunication networkds are Network Function Virtualization (NFV), Software Defined Networking (SDN) and 5G mobile networks equipped with small cells. Additionally Video Quality Assessment (VQA) methods are a very useful tool for both content providers and network operators, to understand of how users perceive quality and this study the feasibility of potential services and adapt the network available resources to satisfy the user requirements

A reduced reference video quality assessment method for provision as a service over SDN/NFV-enabled networks

139 p.The proliferation of multimedia applications and services has generarted a noteworthy upsurge in network traffic regarding video content and has created the need for trustworthy service quality assessment methods. Currently, predominent position among the technological trends in telecommunication networkds are Network Function Virtualization (NFV), Software Defined Networking (SDN) and 5G mobile networks equipped with small cells. Additionally Video Quality Assessment (VQA) methods are a very useful tool for both content providers and network operators, to understand of how users perceive quality and this study the feasibility of potential services and adapt the network available resources to satisfy the user requirements