Motorway Vehicular Networks with Renewable Energy Powered Access Points

The goal of this work is to consider the potential of using renewable energy only to power roadside units (RSUs), which not only reduces CO2 footprint but also reduces the infrastructure needed in motorway vehicular communication. The thesis begins with collation and analysis of wind and motorway traffic data for the purpose of determining the energy demand of vehicular networks as well as the energy supply obtainable from wind. This is followed by the study of a standalone RSU powered by wind energy. Small size standalone wind energy systems which have benefits of low cost, easy and large scale deployments are implemented for the low power RSUs. The concept of wind energy based rate adaptation is introduced and implemented in the RSU through which RSU can vary transmission power according to the availability of wind energy. This reduces the outage and improves the overall service quality. Traditionally rate adaptation was employed to cater for wireless channel unavailability. A queuing model for the RSU is developed and verified through simulation to evaluate the performance in terms of delay, packet loss and utilisation. Channel fading is considered and the performance of the RSU is re-evaluated in terms of the same quality of service parameters, viz. delay, packet loss and utilisation to investigate the impact of fading in the network. Next, the reliability of the RSU is redefined in the context of unavailability of sufficient wind power. The transient nature of wind energy causes the RSUs to either transmit at full data rate or not transmit at all depending on the availability of sufficient energy. Thus, a failure occurs when the wind power is less than the load. Therefore, a framework has been developed for redefining a number of reliability parameters in the context of wind powered RSUs. A detailed wind data analysis was carried out based upon the hourly wind speed obtained from the UK air information resource (AIR) database for a period of five years, to determine the energy model of the deployed micro-turbine. An energy storage device (a small battery) is connected to the micro-wind turbine for improved service quality

Inter-vehicular communication using wireless ad-hoc networks.

This thesis proposes a new routing algorithm to allow communication in highly mobile, wireless ad-hoc networks, which in nature are wireless and infrastructureless. In motorway environments, the topology of the network changes frequently and unpredictable due to the mobility of the nodes. We investigate a new reactive routing algorithm based in location information in the context of inter-vehicular communication. In such a scenario, the originator of the communication does not know the position of its communication partner in advance. Rapid topology changes and scarce bandwidth prevent the nodes from exchanging positions regularly throughout the network. Therefore, we focus on reactive algorithms and explore several mechanisms limiting the flooding of discoveries location packets. The originator of a message uses scoped and controlled flooding to reach the destination. The receivers of the flooded message use their knowledge of the local environment to decide whether they can reach the intended destination of the message or retransmit the message to their neighbours. To evaluate our communication algorithm, we first validate it in a small scale network with the results o f a test bed. Then for large scale networks, our protocol is compared with the models of two prominent reactive routing algorithms: Ad-Hoc On-Demand Distance Vector (AODV) and Dynamic Source Routing (DSR) on a multi-lane rectangular and circular dual carriageway representative of city and motorway driving. Finally, our algorithm is analysed on a multi-lane circular carriageway representative of a six lane motorway driving with one location-based routing algorithm: Greedy Perimeter Stateless Routing (GPSR). The mobility of the vehicles on a Motorway using a Microscopic traffic model developed in OPNET has been used to evaluate the performance of each protocol in terms of: Route Discovery Time (RDT), End to End Delay (EED), Routing Overhead (RO), Overhead (O), Routing Load (RL) and Delivery Ratio (DR)

Sleep-Enabled Roadside Units for Motorway Vehicular Networks

In this paper, we introduce a number of generic sleep mechanisms for energy saving at the vehicular roadside units (RSUs). Since random sleep cycles (sleep cycles type-I) were already introduced before, we term the introduced mechanisms sleep cycles (type-II, III, IV, V, VI). Each sleep cycles type arranges the service and sleep sequences distinctively to yield various levels of energy savings and average packet delay. A generic analytic model for the roadside unit (RSU) with such sleep cycles is proposed using G/G/1/K G-vacation queuing, where real vehicular traffic profiles and packet size measurements are utilised. The performance evaluation reveals that with one of the proposed sleep cycles (type-IV), the RSU achieves 68% energy savings and 7.3 ms average packet delay over the day, resulting in respective improvements of 10% and 28% compared to the existing random sleep cycles. These improvements have been achieved under a very conservative operating delay bound for audio conferencing applications. However, modern compression and codecs, due to their leniency on Quality of Service (QoS), would potentially enable higher energy savings through the proposed sleep cycles

Performance analysis of vehicular networks for motorway scenario.

Abstract Not Provided

An efficient cluster-based service model for vehicular ad-hoc networks on motorways

Vehicular Ad-Hoc Networks (VANET) can, but not limited to provide users with useful traffic and environmental information services to improve travelling efficiency and road safety. The communications systems used in VANET include vehicle-to-vehicle communications (V2V) and vehicle-to-infrastructure communications (V2I). The transmission delay and the energy consumption cost for maintaining good-quality communications vary depending on the transmission distance and transmission power, especially on motorways where vehicles are moving at higher speeds. In addition, in modern transportation systems, electric vehicles are becoming more and more popular, which require a more efficient battery management, this also call for an efficient way of vehicular transmission. In this project, a cluster-based two-way data service model to provide real-time data services for vehicles on motorways is designed. The design promotes efficient cooperation between V2V and V2I, or namely V2X, with the objective of improving both service and energy performance for vehicular networks with traffic in the same direction. Clustering is an effective way of applying V2X in VANET systems, where the cluster head will take the main responsibility of exchanging data with Road Side Units (RSU) and other cluster members. The model includes local service data collection, data aggregation, and service data downloading. We use SUMO and OMNET++ to simulate the traffic scenarios and the network communications. Two different models (V2X and V2I) are compared to evaluate the performance of the proposed model under different flow speeds. From the results, we conclude that the cluster-based service model outperforms the non-clustered model in terms of service successful ratio, network throughput and energy consumption

Energy Efficient Nano Servers Provisioning for Information Piece Delivery in a Vehicular Environment

In this paper, we propose energy efficient Information Piece Delivery (IPD) through Nano Servers (NSs) in a vehicular network. Information pieces may contain any data that needs to be communicated to a vehicle. The available power (renewable or non-renewable) for a NS is variable. As a result, the service rate of a NS varies linearly with the available energy within a given range. Our proposed system therefore exhibits energy aware rate adaptation (RA), which uses variable transmission energy. We have also developed another transmission energy saving method for comparison, where sleep cycles (SC) are employed. Both methods are compared against an acceptable download time. To reduce the operational energy, we first optimise the locations of the NSs by developing a mixed integer linear programming (MILP) model, which takes into account the hourly variation of the traffic. The model is validated through a Genetic Algorithm (GA1). Furthermore, to reduce the gross delay over the entire vehicular network, the available renewable energy (wind farm) is optimally allocated to each NS according to piece demand. This, in turn, also reduces the network carbon footprint. A Genetic Algorithm (GA2) is also developed to validate the MILP results associated with this system. Through transmission energy savings, RA and SC further reduce the NSs energy consumption by 19% and 18% respectively, however at the expense of higher download time. MILP model 4 (with RA) and model 5 (with SC) reduced the delay by 81% and 83% respectively, while minimising the carbon footprint by 96% and 98% respectively, compared to the initial MILP model

Load Adaptive Caching Points for a Content Distribution Network

The unprecedented growth in content demand on smartphones has significantly increased the energy consumption of current cellular and backbone networks. Apart from achieving stringent carbon footprint targets, provisioning high data rates to city vehicular users while maintaining quality of service (QoS) remains a serious challenge. In previous work, to support content delivery at high data rates, the number and locations of caching points (CPs) within a content distribution network (CDN) were optimized while reducing the operational energy consumption compared to typical cellular networks. Further reduction in energy consumption may be possible through sleep cycles, which reduces transmission energy consumption. However, sleep cycles degrade the quality of service. Therefore, in this paper, we propose a novel load adaptation technique for a CP which not only enhances content download rate but also reduces transmission energy consumption through random sleep cycles. Unlike a non-load adaptive (deterministic) CP, the performance results reveal that the load adaptive CP achieves considerably lower average piece delay (approximately 60% on average during the day), leveraging the introduction of random sleep cycles to save transmission energy. The proposed CP saves up to 84% transmission energy during off-peak hours and 33% during the whole day while fulfilling content demand in a city vehicular environment

Information collection algorithm for vehicular ad-hoc networks (application domain: Urban Traffic Wireless Vehicular Ad-Hoc Networks (VANETs))

Vehicle to vehicle communication (V2VC) is one of the modern approaches for exchanging and generating traffic information with (yet to be realized) potential to improve road safety, driving comfort and traffic control. In this research, we present a novel algorithm which is based on V2V communication, uses in-vehicle sensor information and in collaboration with the other vehicles' sensor information can detect road conditions and determine the geographical area where this road condition exists – e.g. geographical area where there is traffic density, unusual traffic behaviour, a range of weather conditions (raining), etc. The algorithms' built-in automatic geographical restriction of the data collection, aggregation and dissemination mechanisms allows warning messages to be received by any car, not necessarily sharing the identified road condition, which may then be used to identify the optimum route taken by the vehicle e.g. avoid bottlenecks or dangerous areas including accidents or congestions on their current routes. This research covers the middle ground between MANET [1] and collaborative data generation based on knowledge granularity (aggregation). It investigates the possibility of designing, implementing and modelling of the functionality of an algorithm (as part of the design of an intelligent node in an Intelligent Transportation System - ITS) that ensures active participation in the formation, routing and general network support of MANETs and also helps in-car traffic information and real-time control generation and distribution. The work is natural extension of the efforts of several large EU projects like DRIVE [2], GST [3] and SAFESPOT [4]