388 research outputs found

    Precise energy efficient scheduling of mixed-criticality tasks & sustainable mixed-criticality scheduling

    Get PDF
    In this thesis, the imprecise mixed-criticality model (IMC) is extended to precise scheduling of tasks, and integrated with the dynamic voltage and frequency scaling (DVFS) technique to enable energy minimization. The challenge in precise scheduling of MC systems is to simultaneously guarantee the timing correctness for all tasks, hi and lo, under both pessimistic and optimistic (less pessimistic) assumptions. To the best of knowledge this is the first work to address the integration of DVFS energy conserving techniques with precise scheduling of lo-tasks of the MC model. In this thesis, the utilization based schedulability tests and sufficient conditions for such systems under Earliest Deadline First EDF-VD scheduling policy are presented. Quantitative study in the forms of speedup bound and approximation ratio are also proved for the unified model. Extensive experimental studies are conducted to verify the theoretical results as well as the effectiveness of the proposed algorithm. In safety- critical systems, it is essential to perform schedulability analysis prior to run-time. Parameters characterizing the run-time workload are generated by pessimistic techniques; hence, adopting conservative estimates may result in systems performing much better than anticipated during run-time. This thesis also addresses the following questions associated to the better performance of the task system: (i) How does parameter change affect the schedulability of a task set (system)? (ii) In the event that a mixed-criticality system design is deemed schedulable and specific part/parts of the system are reassigned to be of low-criticality, is the system still safe to run? (iii) If a system is presumed to be non-schedulable, does it invariably benefit to reduce the criticality of some task? To answer these questions, in this thesis, we not only study the property of sustainability with regards to criticality levels, but also revisit sustainability of several uniprocessor and multiprocessor scheduling policies with respect to other parameters --Abstract, page iii

    MCFlow: Middleware for Mixed-Criticality Distributed Real-Time Systems

    Get PDF
    Traditional fixed-priority scheduling analysis for periodic/sporadic task sets is based on the assumption that all tasks are equally critical to the correct operation of the system. Therefore, every task has to be schedulable under the scheduling policy, and estimates of tasks\u27 worst case execution times must be conservative in case a task runs longer than is usual. To address the significant under-utilization of a system\u27s resources under normal operating conditions that can arise from these assumptions, several \emph{mixed-criticality scheduling} approaches have been proposed. However, to date there has been no quantitative comparison of system schedulability or run-time overhead for the different approaches. In this dissertation, we present what is to our knowledge the first side-by-side implementation and evaluation of those approaches, for periodic and sporadic mixed-criticality tasks on uniprocessor or distributed systems, under a mixed-criticality scheduling model that is common to all these approaches. To make a fair evaluation of mixed-criticality scheduling, we also address some previously open issues and propose modifications to improve schedulability and correctness of particular approaches. To facilitate the development and evaluation of mixed-criticality applications, we have designed and developed a distributed real-time middleware, called MCFlow, for mixed-criticality end-to-end tasks running on multi-core platforms. The research presented in this dissertation provides the following contributions to the state of the art in real-time middleware: (1) an efficient component model through which dependent subtask graphs can be configured flexibly for execution within a single core, across cores of a common host, or spanning multiple hosts; (2) support for optimizations to inter-component communication to reduce data copying without sacrificing the ability to execute subtasks in parallel; (3) a strict separation of timing and functional concerns so that they can be configured independently; (4) an event dispatching architecture that uses lock free algorithms where possible to reduce memory contention, CPU context switching, and priority inversion; and (5) empirical evaluations of MCFlow itself and of different mixed criticality scheduling approaches both with a single host and end-to-end across multiple hosts. The results of our evaluation show that in terms of basic distributed real-time behavior MCFlow performs comparably to the state of the art TAO real-time object request broker when only one core is used and outperforms TAO when multiple cores are involved. We also identify and categorize different use cases under which different mixed criticality scheduling approaches are preferable

    A method to generate occam skeletons from formal specifications

    Get PDF
    We consider the problem of automatically generating parallel programs in the occam language. In particular, we are concerned with the generation of program skeletons, that define just those computations that are common to a number of similar systems leaving empty or 'stub' functions or processes in the code which are to be filled in later in an application-specific manner. Rather than attempt to solve the problem for arbitrary parallel systems, we focus on data-parallel systems composed of iterative processes. In this paper, we propose an implementation strategy for a cellular automaton. Only uniprocessor occam code is considered

    Real-time operating system support for multicore applications

    Get PDF
    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Automação e Sistemas, Florianópolis, 2014Plataformas multiprocessadas atuais possuem diversos níveis da memória cache entre o processador e a memória principal para esconder a latência da hierarquia de memória. O principal objetivo da hierarquia de memória é melhorar o tempo médio de execução, ao custo da previsibilidade. O uso não controlado da hierarquia da cache pelas tarefas de tempo real impacta a estimativa dos seus piores tempos de execução, especialmente quando as tarefas de tempo real acessam os níveis da cache compartilhados. Tal acesso causa uma disputa pelas linhas da cache compartilhadas e aumenta o tempo de execução das aplicações. Além disso, essa disputa na cache compartilhada pode causar a perda de prazos, o que é intolerável em sistemas de tempo real críticos. O particionamento da memória cache compartilhada é uma técnica bastante utilizada em sistemas de tempo real multiprocessados para isolar as tarefas e melhorar a previsibilidade do sistema. Atualmente, os estudos que avaliam o particionamento da memória cache em multiprocessadores carecem de dois pontos fundamentais. Primeiro, o mecanismo de particionamento da cache é tipicamente implementado em um ambiente simulado ou em um sistema operacional de propósito geral. Consequentemente, o impacto das atividades realizados pelo núcleo do sistema operacional, tais como o tratamento de interrupções e troca de contexto, no particionamento das tarefas tende a ser negligenciado. Segundo, a avaliação é restrita a um escalonador global ou particionado, e assim não comparando o desempenho do particionamento da cache em diferentes estratégias de escalonamento. Ademais, trabalhos recentes confirmaram que aspectos da implementação do SO, tal como a estrutura de dados usada no escalonamento e os mecanismos de tratamento de interrupções, impactam a escalonabilidade das tarefas de tempo real tanto quanto os aspectos teóricos. Entretanto, tais estudos também usaram sistemas operacionais de propósito geral com extensões de tempo real, que afetamos sobre custos de tempo de execução observados e a escalonabilidade das tarefas de tempo real. Adicionalmente, os algoritmos de escalonamento tempo real para multiprocessadores atuais não consideram cenários onde tarefas de tempo real acessam as mesmas linhas da cache, o que dificulta a estimativa do pior tempo de execução. Esta pesquisa aborda os problemas supracitados com as estratégias de particionamento da cache e com os algoritmos de escalonamento tempo real multiprocessados da seguinte forma. Primeiro, uma infraestrutura de tempo real para multiprocessadores é projetada e implementada em um sistema operacional embarcado. A infraestrutura consiste em diversos algoritmos de escalonamento tempo real, tais como o EDF global e particionado, e um mecanismo de particionamento da cache usando a técnica de coloração de páginas. Segundo, é apresentada uma comparação em termos da taxa de escalonabilidade considerando o sobre custo de tempo de execução da infraestrutura criada e de um sistema operacional de propósito geral com extensões de tempo real. Em alguns casos, o EDF global considerando o sobre custo do sistema operacional embarcado possui uma melhor taxa de escalonabilidade do que o EDF particionado com o sobre custo do sistema operacional de propósito geral, mostrando claramente como diferentes sistemas operacionais influenciam os escalonadores de tempo real críticos em multiprocessadores. Terceiro, é realizada uma avaliação do impacto do particionamento da memória cache em diversos escalonadores de tempo real multiprocessados. Os resultados desta avaliação indicam que um sistema operacional "leve" não compromete as garantias de tempo real e que o particionamento da cache tem diferentes comportamentos dependendo do escalonador e do tamanho do conjunto de trabalho das tarefas. Quarto, é proposto um algoritmo de particionamento de tarefas que atribui as tarefas que compartilham partições ao mesmo processador. Os resultados mostram que essa técnica de particionamento de tarefas reduz a disputa pelas linhas da cache compartilhadas e provê garantias de tempo real para sistemas críticos. Finalmente, é proposto um escalonador de tempo real de duas fases para multiprocessadores. O escalonador usa informações coletadas durante o tempo de execução das tarefas através dos contadores de desempenho em hardware. Com base nos valores dos contadores, o escalonador detecta quando tarefas de melhor esforço o interferem com tarefas de tempo real na cache. Assim é possível impedir que tarefas de melhor esforço acessem as mesmas linhas da cache que tarefas de tempo real. O resultado desta estratégia de escalonamento é o atendimento dos prazos críticos e não críticos das tarefas de tempo real.Abstracts: Modern multicore platforms feature multiple levels of cache memory placed between the processor and main memory to hide the latency of ordinary memory systems. The primary goal of this cache hierarchy is to improve average execution time (at the cost of predictability). The uncontrolled use of the cache hierarchy by realtime tasks may impact the estimation of their worst-case execution times (WCET), specially when real-time tasks access a shared cache level, causing a contention for shared cache lines and increasing the application execution time. This contention in the shared cache may leadto deadline losses, which is intolerable particularly for hard real-time (HRT) systems. Shared cache partitioning is a well-known technique used in multicore real-time systems to isolate task workloads and to improve system predictability. Presently, the state-of-the-art studies that evaluate shared cache partitioning on multicore processors lack two key issues. First, the cache partitioning mechanism is typically implemented either in a simulated environment or in a general-purpose OS (GPOS), and so the impact of kernel activities, such as interrupt handlers and context switching, on the task partitions tend to be overlooked. Second, the evaluation is typically restricted to either a global or partitioned scheduler, thereby by falling to compare the performance of cache partitioning when tasks are scheduled by different schedulers. Furthermore, recent works have confirmed that OS implementation aspects, such as the choice of scheduling data structures and interrupt handling mechanisms, impact real-time schedulability as much as scheduling theoretic aspects. However, these studies also used real-time patches applied into GPOSes, which affects the run-time overhead observed in these works and consequently the schedulability of real-time tasks. Additionally, current multicore scheduling algorithms do not consider scenarios where real-time tasks access the same cache lines due to true or false sharing, which also impacts the WCET. This thesis addresses these aforementioned problems with cache partitioning techniques and multicore real-time scheduling algorithms as following. First, a real-time multicore support is designed and implemented on top of an embedded operating system designed from scratch. This support consists of several multicore real-time scheduling algorithms, such as global and partitioned EDF, and a cache partitioning mechanism based on page coloring. Second, it is presented a comparison in terms of schedulability ratio considering the run-time overhead of the implemented RTOS and a GPOS patched with real-time extensions. In some cases, Global-EDF considering the overhead of the RTOS is superior to Partitioned-EDF considering the overhead of the patched GPOS, which clearly shows how different OSs impact hard realtime schedulers. Third, an evaluation of the cache partitioning impacton partitioned, clustered, and global real-time schedulers is performed.The results indicate that a lightweight RTOS does not impact real-time tasks, and shared cache partitioning has different behavior depending on the scheduler and the task's working set size. Fourth, a task partitioning algorithm that assigns tasks to cores respecting their usage of cache partitions is proposed. The results show that by simply assigning tasks that shared cache partitions to the same processor, it is possible to reduce the contention for shared cache lines and to provideHRT guarantees. Finally, a two-phase multicore scheduler that provides HRT and soft real-time (SRT) guarantees is proposed. It is shown that by using information from hardware performance counters at run-time, the RTOS can detect when best-effort tasks interfere with real-time tasks in the shared cache. Then, the RTOS can prevent best effort tasks from interfering with real-time tasks. The results also show that the assignment of exclusive partitions to HRT tasks together with the two-phase multicore scheduler provides HRT and SRT guarantees, even when best-effort tasks share partitions with real-time tasks

    An Efficient Online Benefit-aware Multiprocessor Scheduling Technique for Soft Real-Time Tasks Using Online Choice of Approximation Algorithms

    Get PDF
    Maximizing the benefit gained by soft real-time tasks in many applications and embedded systems is highly needed to provide an acceptable QoS (Quality of Service). Examples of such applications and embedded systems include real-time medical monitoring systems, video- streaming servers, multiplayer video games, and mobile multimedia devices. In these systems, tasks are not equally critical (or beneficial). Each task comes with its own benefit-density function which can be different from the others’. The sooner a task completes, the more benefit it gains. In this work, a novel online benefit-aware preemptive approach is presented in order to enhance scheduling of soft real-time aperiodic and periodic tasks in multiprocessor systems. The objective of this work is enhancing the QoS by increasing the total benefit, while reducing flow times and deadline misses. This method prioritizes the tasks using their benefit-density functions, which imply their importance to the system, and schedules them in a real-time basis. The first model I propose is for scheduling soft real-time aperiodic tasks. An online choice of two approximation algorithms, greedy and load-balancing, is used in order to distribute the low- priority tasks among identical processors at the time of their arrival without using any statistics. The results of theoretical analysis and simulation experiments show that this method is able to maximize the gained benefit and decrease the computational complexity (compared to existing algorithms) while minimizing makespan with fewer missed deadlines and more balanced usage of processors. I also propose two more versions of this algorithm for scheduling SRT periodic tasks, with implicit and non-implicit deadlines, in addition to another version with a modified loadbalancing factor. The extensive simulation experiments and empirical comparison of these algorithms with the state of the art, using different utilization levels and various benefit density functions show that these new techniques outperform the existing ones. A general framework for benefit-aware multiprocessor scheduling in applications with periodic, aperiodic or mixed real-time tasks is also provided in this work.Computer Science, Department o
    • …
    corecore