Robust phase unwrapping based on non-coprime fringe pattern periods for deflectometry measurements

Phase-measuring deflectometry is a technique for non-contact inspection of reflective surfaces. A camera setup captures the reflection of a sine-modulated fringe pattern shifted across a screen; the location-dependent measured phase effectively encodes the screen coordinates. As the used fringe patterns are much narrower than the screen dimension, the resulting phase maps are wrapped. The number-theoretical solution uses the Chinese remainder theorem to calculate an unwrapped phase map from repeated measurements with coprime fringe widths. The technique is highly susceptible to phase noise, i.e. small deviations of the measured phase values generally lead to unwrapped phase values with large errors. We propose a modification and show how non-coprime period widths make phase unwrapping robust against phase noise. Measurements with two non-coprime fringe period widths introduce the opportunity to discriminate between “legal” measured phase value pairs, that potentially originate from noise-free measurements, and “illegal” phase value pairs, that necessarily result from noise-affected measurements. Arranged as a matrix, the legal measurements lie on distinct diagonals. This insight not only allows to determine the legality of a measurement, but also to provide a correction by looking for the closest legal matrix entry. We present an experimental comparison of the resulting phase maps with reference phase maps. The presented results include descriptive statistics on the average rate of illegal phase measurements as well as on the deviation from the reference. The measured mean absolute deviation decreases from 1.99 pixels before correction to 0.21 pixels after correction, with a remaining maximum absolute deviation of 0.91 pixels

The NASA SBIR product catalog

The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected

Mixed physical and virtual design environments for digital fabrication

Digital Fabrication (3D printing, laser-cutting or CNC milling) enables the automated fabrication of physical objects from digital models. This technology is becoming more readily available and ubiquitous, as digital fabrication machines become more capable and affordable. When it comes to designing the objects that are to be fabricated however, there are still barriers for novices and inconveniences for experts. Through digital fabrication, physical objects are created from digital models. The digital models are currently designed in virtual design environments, which separates the world we design in from the world we design for. This separation hampers design processes of experienced users and presents barriers to novices. For example, manipulating objects in virtual spaces is difficult, but comes naturally in the physical world. Further, in a virtual environment, we cannot easily integrate existing physical objects or experience the object we are designing in its future context (e.g., try out a game controller during design). This lack of reflection impedes designer's spatial understanding in virtual design environments. To enable our virtual creations to become physical reality, we have to posses an ample amount of design and engineering knowledge, which further steepens the learning curve for novices. Lastly, as we are physically separated from our creation - until it is fabricated - we loose direct engagement with the material and object itself, impacting creativity. We follow a research through design approach, in which we take up the role as interaction designers and engineers. Based on four novel interaction concepts, we explore how the physical world and design environments can be brought closer together, and address the problems caused their prior separation. As engineers, we implement each of these concepts in a prototype system, demonstrating that they can be implemented. Using the systems, we evaluate the concepts and how the concepts alleviate the aforementioned problems, and that the design systems we create are capable of producing useful objects. In this thesis, we make four main contributions to the body of digital fabrication related HCI knowledge. Each contribution consists of an interaction concept which addresses a subset of the problems, caused by the separation of virtual design environment, and physical target world. We evaluate the concepts through prototype implementations, example walkthroughs and where appropriate user-studies, demonstrating how the concepts alleviate the problems they address. For each concept and system, we describe the design rationale, and present technical contributions towards their implementation. The results of this thesis have implications for different user audiences, design processes, the artifacts users design and domains outside of digital fabrication. Through our concepts and systems, we lower barriers for novices to utilize digital fabrication. For experienced designers, we make existing design processes more convenient and efficient. We ease the design of artifacts that reuse existing objects, or that combine organic and geometrically structured design. Lastly, the novel interaction concepts (and on a technical level, the systems) we present, which blur the lines between physical and virtual space, can serve as basis for future interaction design and HCI research

Ophthalmic engineering:the development of novel instrumentation to further research in the field

The principle theme of this thesis is the advancement and expansion of ophthalmic research via the collaboration between professional Engineers and professional Optometrists. The aim has been to develop new and novel approaches and solutions to contemporary problems in the field. The work is sub divided into three areas of investigation; 1) High technology systems, 2) Modification of current systems to increase functionality, and 3) Development of smaller more portable and cost effective systems. High Technology Systems: A novel high speed Optical Coherence Tomography (OCT) system with integrated simultaneous high speed photography was developed achieving better operational speed than is currently available commercially. The mechanical design of the system featured a novel 8 axis alignment system. A full set of capture, analysis, and post processing software was developed providing custom analysis systems for ophthalmic OCT imaging, expanding the current capabilities of the technology. A large clinical trial was undertaken to test the dynamics of contact lens edge interaction with the cornea in-vivo. The interaction between lens edge design, lens base curvature, post insertion times and edge positions was investigated. A novel method for correction of optical distortion when assessing lens indentation was also demonstrated. Modification of Current Systems: A commercial autorefractor, the WAM-5500, was modified with the addition of extra hardware and a custom software and firmware solution to produce a system that was capable of measuring dynamic accommodative response to various stimuli in real time. A novel software package to control the data capture process was developed allowing real time monitoring of data by the practitioner, adding considerable functionality of the instrument further to the standard system. The device was used to assess the accommodative response differences between subjects who had worn UV blocking contact lens for 5 years, verses a control group that had not worn UV blocking lenses. While the standard static measurement of accommodation showed no differences between the two groups, it was determined that the UV blocking group did show better accommodative rise and fall times (faster), thus demonstrating the benefits of the modification of this commercially available instrumentation. Portable and Cost effective Systems: A new instrument was developed to expand the capability of the now defunct Keeler Tearscope. A device was developed that provided a similar capability in allowing observation of the reflected mires from the tear film surface, but with the added advantage of being able to record the observations. The device was tested comparatively with the tearscope and other tear film break-up techniques, demonstrating its potential. In Conclusion: This work has successfully demonstrated the advantages of interdisciplinary research between engineering and ophthalmic research has provided new and novel instrumented solutions as well as having added to the sum of scientific understanding in the ophthalmic field

Additive manufacturing of functional engineering components

Additive Manufacturing (AM) is a class of echnologies whereby components are made in an additive, layer-by-layer fashion enabling production of complex parts in which complexity has little or no effect on cost. However typical components roduced using these techniques are basic structural items with no major strength requirement and low geometric tolerances made from a single material. his thesis develops a low-cost Fused Filament abrication (FFF) based AM technique to produce functional parts. This is achieved by through esearching and implementing new materials in ombination and using precise control of infill tool paths for existing materials. Robocasting has previously been shown to be extremely versatile, however is known to offer poorer build quality relative to its ess-versatile counterparts. Research was ndertaken to enable Robocasting to be combined with FFF to enable the print quality and practical benefits of FFF with the material flexibility of Robocasting. This resulted in the manufacture of several multiple-material omponents using the technique to demonstrate its potential. In order to minimise the number of materials required to obtain desired properties, the effect of process parameters such as layer height, infill angle, and infill porosity were investigated. In total over an order of agnitude variation in Young’s modulus and tensile strength were achieved, enabling these properties to be actively controlled within the manufactured components. Finally a novel non-eutectic low melting point alloy was developed to be compatible with the FFF process. Its greater viscosity compared to traditional eutectics resulted in improved print quality and the reliable deposition of electrically conductive track 0.57x0.25mm in cross-section. In addition the material is approximately three orders of magnitude more conductive that typical printable organic inks. A micro-controller was produced using the technique in conjunction with traditional electronics components. This represents the first time a functional electrical circuitry, with sufficient conductivity for the majority of applications and interfacing directly with standard electrical components, has been produced using a very low-cost AM technique such as FFF. The research undertaken builds components with substantially improved functionality relative to traditional AM products, enabling electromechanical components with varying mechanical and electrical properties. It is anticipated that this could substantially reduce the part-count for many engineering assemblies and open up Additive Manufacturing to many new applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

NASA Tech Briefs, May 1997

Topics covered include: Advanced Composites, Plastics and Metals; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports

BRIX₂ - A Versatile Toolkit for Rapid Prototyping and Education in Ubiquitous Computing

Zehe S. BRIX₂ - A Versatile Toolkit for Rapid Prototyping and Education in Ubiquitous Computing. Bielefeld: Universität Bielefeld; 2018

NASA Tech Briefs, May 1996

Topics include: Video and Imaging;Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report

Meso-scale FDM material layout design strategies under manufacturability constraints and fracture conditions

In the manufacturability-driven design (MDD) perspective, manufacturability of the product or system is the most important of the design requirements. In addition to being able to ensure that complex designs (e.g., topology optimization) are manufacturable with a given process or process family, MDD also helps mechanical designers to take advantage of unique process-material effects generated during manufacturing. One of the most recognizable examples of this comes from the scanning-type family of additive manufacturing (AM) processes; the most notable and familiar member of this family is the fused deposition modeling (FDM) or fused filament fabrication (FFF) process. This process works by selectively depositing uniform, approximately isotropic beads or elements of molten thermoplastic material (typically structural engineering plastics) in a series of pre-specified traces to build each layer of the part. There are many interesting 2-D and 3-D mechanical design problems that can be explored by designing the layout of these elements. The resulting structured, hierarchical material (which is both manufacturable and customized layer-by-layer within the limits of the process and material) can be defined as a manufacturing process-driven structured material (MPDSM). This dissertation explores several practical methods for designing these element layouts for 2-D and 3-D meso-scale mechanical problems, focusing ultimately on design-for-fracture. Three different fracture conditions are explored: (1) cases where a crack must be prevented or stopped, (2) cases where the crack must be encouraged or accelerated, and (3) cases where cracks must grow in a simple pre-determined pattern. Several new design tools, including a mapping method for the FDM manufacturability constraints, three major literature reviews, the collection, organization, and analysis of several large (qualitative and quantitative) multi-scale datasets on the fracture behavior of FDM-processed materials, some new experimental equipment, and the refinement of a fast and simple g-code generator based on commercially-available software, were developed and refined to support the design of MPDSMs under fracture conditions. The refined design method and rules were experimentally validated using a series of case studies (involving both design and physical testing of the designs) at the end of the dissertation. Finally, a simple design guide for practicing engineers who are not experts in advanced solid mechanics nor process-tailored materials was developed from the results of this project.U of I OnlyAuthor's request