Performance analysis of 1ϕ T/4 PLLs with secondary control path in current sensorless bridgeless PFCs

New power factor correction (PFC) stages such as bridgeless converters and the associated current shaping techniques require grid synchronization to ensure unity Displacement Power Factor (DPF). Sensorless line current rebuilding algorithms also need synchronization with the line voltage to compensate at least for part of the current estimation error. The application of a secondary control path to reach faster and more robustly the proper operation point previously applied in single/three-phase PLLs in grid connected converters is here proposed for the current sensorless bridgeless PFCs. This work analyzes the performance of three single-phase T/4 PLL structures, first without secondary control path, and later with feedforward and feedback secondary control paths, both in simulation and experimentally, and evaluates their applicability to current sensorless digitally controlled single phase bridgeless PFCs based on the current rebuilding technique.This work has been supported by the Spanish Ministry of Economy and Competitiveness under grant TEC2014-52316-R ECOTREND Estimation and Optimal Control for Energy Conversion with Digital Devices

1phi SOGI phase locked loop with secondary control path in grid-connected power converters

The performance of digitally controlled gridconnected power converters depends to a large extent on the synchronization strategy. Single-phase phase locked loops (PLL) with a second-order generalized integrator (SOGI) as quadrature signal generation subsystem provide proper grid synchronization in the case of harmonically distorted grid voltage. The SOGI-PLL transient performance can be improved by replacing the PLL by a frequency locked loop (FLL). However, compared with SOGI-PLLs, SOGI-FLLs perform poorly in steady-state. This work proposes to include a secondary control path (SCP) to improve the dynamics of SOGIPLLs, while maintaining the steady-state performance. Simulation and experimental results are provided to validate the proposal.This work has been supported by the Spanish Ministry of Science and Innovation under Project RTI2018-095138-B-C31 PEGIA – Power Electronics for the Grid and Industry Applications

An Adaptive Feed-Forward Phase Locked Loop for Grid Synchronization of Renewable Energy Systems under Wide Frequency Deviations

Synchronization is a crucial problem in the grid-connected inverter’s control and operation. A phase-locked loop (PLL) is a typical grid synchronization strategy, which ought to have a high resistance to power system uncertainties since its sensitivity influences the generated reference signal. The traditional PLL catches the phase and frequency of the input signal via the feedback loop filter (LF). In general, to enhance the steady-state capability during distorted grid conditions generally, a filter tuned for nominal frequency is used. This PLL corrects large frequency deviations around the nominal frequency, which increases the PLL’s locking time. Therefore, this paper presents an adaptive feed-forward PLL, where the input signal frequency and phase under large frequency deviations are tracked precisely, which overcomes the above-mentioned limitations. The proposed adaptive PLL consists of a feedback loop that reduces the phase error. The feed-forward loop predicts the frequency and phase error, and the frequency adaptive FIR filter reduces the ripples in output, which is due to input distortions. The adaptive mechanism adjusts the gain of the filter in accordance with the supply frequency. This reduces the phase and frequency error and also decreases the locking time under wide frequency deviations. To verify the effectiveness of the proposed adaptive feed-forward PLL, the system was tested under different grid abnormal conditions. Further, the stability analysis has been carried out via a developed prototype test platform in the laboratory. To bring the proposed simulations into real-time implementations and for control strategies, an Altera Cyclone II field-programmable gate array (FPGA) board has been used. The obtained results of the proposed PLL via simulations and hardware are compared with conventional techniques, and it indicates the superiority of the proposed method. The proposed PLL effectively able to tackle the different grid uncertainties, which can be observed from the results presented in the result section

Power Electronics Applications in Renewable Energy Systems

The renewable generation system is currently experiencing rapid growth in various power grids. The stability and dynamic response issues of power grids are receiving attention due to the increase in power electronics-based renewable energy. The main focus of this Special Issue is to provide solutions for power system planning and operation. Power electronics-based devices can offer new ancillary services to several industrial sectors. In order to fully include the capability of power conversion systems in the network integration of renewable generators, several studies should be carried out, including detailed studies of switching circuits, and comprehensive operating strategies for numerous devices, consisting of large-scale renewable generation clusters