29 research outputs found
Optimization in multi-relay wireless networks
The concept of cooperation in communications has drawn a lot of research attention in recent years due to its potential to improve the efficiency of wireless networks. This new form of communications allows some users to act as relays
and assist the transmission of other users' information signals. The aim of this thesis is to apply optimization techniques in the design of multi-relay wireless networks employing cooperative communications. In general, the thesis is organized into two parts: ``Distributed space-time coding' (DSTC) and ``Distributed beamforming', which cover two main approaches in cooperative communications over multi-relay networks.
In Part I of the thesis, various aspects of distributed implementation of space-time coding in a wireless relay network are treated. First, the thesis proposes a new fully-diverse distributed code which allows noncoherent reception at the destination. Second, the problem of coordinating the power allocation (PA) between source and relays to achieve the optimal performance of DSTC is studied and a novel PA scheme is developed. It is shown that the proposed PA scheme can obtain the maximum diversity order of DSTC and significantly outperform other suboptimal PA schemes. Third, the thesis presents the optimal PA scheme to minimize the mean-square error (MSE) in channel estimation during training phase of DSTC. The effect of imperfect channel estimation to the performance of DSTC is also thoroughly studied.
In Part II of the thesis, optimal distributed beamforming designs are developed for a wireless multiuser multi-relay network. Two design criteria for the optimal distributed beamforming at the relays are considered: (i) minimizing the total relay power subject to a guaranteed Quality of Service (QoS) measured in terms of signal-to-noise-ratio (SNR) at the destinations, and (ii) jointly maximizing the SNR margin at the destinations subject to power constraints at the relays. Based on convex optimization techniques,
it is shown that these problems can be formulated and solved via second-order conic programming (SOCP). In addition, this part also proposes simple and fast iterative algorithms to directly solve these optimization problems
Multi-user spatial diversity techniques for wireless communication systems
Multiple antennas at the transmitter and receiver, formally known as multiple-input
multiple-output (MIMO) systems have the potential to either increase the data rates
through spatial multiplexing or enhance the quality of services through exploitation
of diversity. In this thesis, the problem of downlink spatial multiplexing, where a
base station (BS) serves multiple users simultaneously in the same frequency band is
addressed. Spatial multiplexing techniques have the potential to make huge saving
in the bandwidth utilization. We propose spatial diversity techniques with and without
the assumption of perfect channel state information (CSI) at the transmitter.
We start with proposing improvement to signal-to-leakage ratio (SLR) maximization
based spatial multiplexing techniques for both fiat fading and frequency selective
channels. [Continues.
Resource management techniques for sustainable networks with energy harvesting nodes
Premi extraordinari doctorat UPC curs 2015-2016, Ã mbit Enginyeria de les TICThis dissertation proposes novel techniques for assigning resources of wireless networks by considering that the coverage radii are small, implying that some power consumption sinks not considered so far shouldnow be introduced, and by considering that the devices are battery-powered terminals provided with energy harvesting capabilities. In this framework, two different configurations in terms of harvesting capabilities are considered. First, we assume that the energy source is external and not controllable, e.g. solar energy. In this context, the proposed design should adapt to the energy that is currently being harvested. We also study the effect of having a finite backhaul connection that links the wireless access network with the core network. On the other hand, we propose a design in which the transmitter feeds actively the receivers with energy by transmitting signals that receivers use for recharging their batteries. In this case, the power transfer design should be carried out jointly with the power control strategy for users that receive information as both procedures, transfer of information and transfer of power, are implemented at the transmitter and make use of a common resource, i.e., power.
Apart from techniques for assigning the radio resources, this dissertation develops a procedure for switching on and off base stations. Concerning this, it is important to notice that the traffic profile is not constant throughout the day. This is precisely the feature that can be exploited to define a strategy based on a dynamic selection of the base stations to be switched off when the traffic load is low, without affecting the quality experienced by the users. Thanks to this procedure, we are able to deploy smaller energy harvesting sources and smaller batteries and, thus, to reduce the cost of the network deployment.
Finally, we derive some procedures to optimize high level decisions of the network operation in which variables from several layers of the protocol stack are involved. In this context, admission control procedures for deciding which user should be connected to which base station are studied, taking into account information of the average channel information, the current battery levels, etc. A multi-tier multi-cell scenario is assumed in which base stations belonging to different tiers have different capabilities, e.g., transmission power, battery size, end energy harvesting source size. A set of strategies that require different computational complexity are derived for scenarios with different user mobility requirements.Aquesta tesis doctoral proposa tècniques per assignar els recursos disponibles a les xarxes wireless considerant que els radis de cobertura són petits, el que implica que altres fonts de consum d’energia no considerades fins al moment s’hagin d’introduir dins els dissenys, i considerant que els dispositius estan alimentats amb bateries finites i que tenen a la seva disposició fonts de energy harvesting. En aquest context, es consideren dues configuracions diferents en funció de les capacitats de l’energia harvesting. En primer lloc, s’assumirà que la font d’energia és externa i incontrolable com, per exemple, l’energia solar. Els dissenys proposats han d’adaptar-se a l’energia que s’està recol·lectant en un precÃs moment. En segon lloc, es proposa un disseny en el qual el transmissor és capaç d’enviar energia als receptors mitjançant senyals de radiofreqüència dissenyats per aquest fi, energia que és utilitzada per recarregar les bateries. A part de tècniques d’assignació de recursos radio, en aquesta tesis doctoral es desenvolupa un procediment dinà mic per apagar i encendre estacions base. És important notar que el perfil de trà fic no és constant al llarg del dia. Aquest és precisament el patró que es pot explotar per definir una estratègia dinà mica per poder decidir quines estaciones base han de ser apagades, tot això sense afectar la qualitat experimentada pels usuaris. Grà cies a aquest procediment, es possible desplegar fonts d'energy harvesting més petites i bateries més petites. Finalment, aquesta tesis doctoral presenta procediments per optimitzar decisions de nivell més alt que afecten directament al funcionament global de la xarxa d’accés. Per prendre aquestes decisions, es fa ús de diverses variables que pertanyen a diferents capes de la pila de protocols. En aquest context, aquesta tesis aborda el disseny de tècniques de control d’admissió d’usuaris a estacions base en entorns amb múltiples estacions base, basant-se amb la informació estadÃstica dels canals, i el nivell actual de les bateries, entre altres. L'escenari considerat està format per múltiples estacions base, on cada estació base pertany a una famÃlia amb diferents capacitats, per exemple, potència de transmissió o mida de la bateria. Es deriven un conjunt de tècniques amb diferents costos computacionals que són d'utilitat per a poder aplicar a escenaris amb diferents mobilitats d’usuaris.Award-winningPostprint (published version
Cancelamento de interferência em sistemas celulares distribuÃdos
Doutoramento em Engenharia ElectrotécnicaO tema principal desta tese é o problema de cancelamento de interferência
para sistemas multi-utilizador, com antenas distribuÃdas. Como tal, ao iniciar,
uma visão geral das principais propriedades de um sistema de antenas
distribuÃdas é apresentada. Esta descrição inclui o estudo analÃtico do impacto
da ligação, dos utilizadores do sistema, a mais antenas distribuÃdas.
Durante essa análise é demonstrado que a propriedade mais importante do
sistema para obtenção do ganho máximo, através da ligação de mais antenas
de transmissão, é a simetria espacial e que os utilizadores nas fronteiras das
células são os mais bene ciados. Tais resultados são comprovados através
de simulação. O problema de cancelamento de interferência multi-utilizador
é considerado tanto para o caso unidimensional (i.e. sem codi cação) como
para o multidimensional (i.e. com codi cação). Para o caso unidimensional
um algoritmo de pré-codi cação não-linear é proposto e avaliado, tendo
como objectivo a minimização da taxa de erro de bit. Tanto o caso de
portadora única como o de multipla-portadora são abordados, bem como o
cenário de antenas colocadas e distribuidas. É demonstrado que o esquema
proposto pode ser visto como uma extensão do bem conhecido esquema
de zeros forçados, cuja desempenho é provado ser um limite inferior para
o esquema generalizado. O algoritmo é avaliado, para diferentes cenários,
através de simulação, a qual indica desempenho perto do óptimo, com baixa
complexidade. Para o caso multi-dimensional um esquema para efectuar
"dirty paper coding" binário, tendo como base códigos de dupla camada é
proposto. No desenvolvimento deste esquema, a compressão com perdas de
informação, é considerada como um subproblema. Resultados de simulação
indicam transmissão dedigna proxima do limite de Shannon.This thesis focus on the interference cancellation problem for multiuser distributed
antenna systems. As such it starts by giving an overview of the
main properties of a distributed antenna system. This overview includes, an
analytical investigation of the impact of the connection of additional distributed
antennas, to the system users. That analysis shows that the most
important system property to reach the maximum gain, with the connection
of additional transmit antennas, is spatial symmetry and that the users at
the cell borders are the most bene ted. The multiuser interference problem
has been considered for both the one dimensional (i.e. without coding) and
multidimensional (i.e. with coding) cases. In the unidimensional case, we
propose and evaluate a nonlinear precoding algorithm for the minimization
of the bit-error-rate, of a multiuser MIMO system. Both the single-carrier
and multi-carrier cases are tackled as well as the co-located and distributed
scenarios. It is demonstrated that the proposed scheme can be viewed as an
extension of the well-known zero-forcing, whose performance is proven to be
a lower bound for the generalized scheme. The algorithm was validated extensively
through numerical simulations, which indicate a performance close
to the optimal, with reduced complexity. For the multi-dimensional case, a
binary dirty paper coding scheme, base on bilayer codes, is proposed. In the
development of this scheme, we consider the lossy compression of a binary
source as a sub-problem. Simulation results indicate reliable transmission
close to the Shannon limit
Advanced Signal Processing Techniques for Two-Way Relaying Networks and Full-Duplex Communication Systems
Sehr hohe Datenraten und ständig verfügbare Netzabdeckung in
zukünftigen drahtlosen Netzwerken erfordern neue Algorithmen auf der
physischen Schicht. Die Nutzung von Relais stellt ein vielversprechendes
Verfahren dar, da die Netzabdeckung gesteigert werden kann. Zusätzlich
steht hierdurch im Vergleich zu Kupfer- oder Glasfaserleitungen eine
preiswerte Lösung zur Anbindung an die Netzinfrastruktur zur Verfügung.
Traditionelle Einwege-Relais-Techniken (One-Way Relaying [OWR]) nutzen
Halbduplex-Verfahren (HD-Verfahren), welche das Ãœbertragungssystem
ausbremst und zu spektralen Verlusten führt. Einerseits erlauben es
Zweiwege-Relais-Techniken (Two-Way Relaying [TWR]), simultan sowohl an das
Relais zu senden als auch von diesem zu empfangen, wodurch im Vergleich zu
OWR das Spektrum effizienter genutzt wird. Aus diesem Grunde untersuchen
wir Zweiwege-Relais und im Speziellen TWR-Systeme für den
Mehrpaar-/Mehrnutzer-Betrieb unter Nutzung von Amplify-and-forward-Relais
(AF-Relais). Derartige Szenarien leiden unter Interferenzen zwischen Paaren
bzw. zwischen Nutzern. Um diesen Interferenzen Herr zu werden, werden
hochentwickelte Signalverarbeitungsalgorithmen – oder in anderen Worten
räumliche Mehrfachzugriffsverfahren (Spatial Division Multiple Access
[SDMA]) – benötigt. Andererseits kann der spektrale Verlust durch den
HD-Betrieb auch kompensiert werden, wenn das Relais im Vollduplexbetrieb
arbeitet. Nichtsdestotrotz ist ein FD-Gerät in der Praxis aufgrund starker
interner Selbstinterferenz (SI) und begrenztem Dynamikumfang des
Tranceivers schwer zu realisieren. Aus diesem Grunde sollten
fortschrittliche Verfahren zur SI-Ünterdrückung entwickelt werden. Diese
Dissertation trägt diesen beiden Zielen Rechnung, indem optimale und/oder
effiziente algebraische Lösungen entwickelt werden, welche verschiedenen
Nutzenfunktionen, wie Summenrate und minimale Sendeleistung, maximieren.Im
ersten Teil studieren wir zunächst Mehrpaar-TWR-Netzwerke mit einem
einzelnen Mehrantennen-AF-Relais. Dieser Anwendungsfall kann auch so
betrachtet werden, dass sich mehrere verschiedene Dienstoperatoren Relais
und Spektrum teilen, wobei verschiedene Nutzerpaare zu verschiedenen
Dienstoperatoren gehören. Aktuelle Ansätzen zielen auf
Interferenzunterdrückung ab. Wir schlagen ein auf Projektion basiertes
Verfahren zur Trennung mehrerer Dienstoperatoren (projection based
separation of multiple operators [ProBaSeMO]) vor. ProBaSeMO ist leicht
anpassbar für den Fall, dass jeder Nutzer mehrere Antennen besitzt oder
unterschiedliche Systemdesignkriterien angewendet werden müssen. Als
Bewertungsmaßstab für ProBaSeMO entwickeln wir optimale Algorithmen zur
Maximierung der Summenrate, zur Minimierung der Sendeleistung am Relais
oder zur Maximierung des minimalen
Signal-zu-Interferenz-und-Rausch-Verhältnisses (Signal to Interference and
Noise Ratio [SINR]) am Nutzer. Zur Maximierung der Summenrate wurden
spezifische gradientenbasierte Methoden entwickelt, die unabhängig davon
sind, ob ein Nutzer mit einer oder mehr Antennen ausgestattet ist. Um im
Falle eines „Worst-Case“ immer noch eine polynomielle Laufzeit zu
garantieren, entwickelten wir einen Algorithmus mit polynomieller Laufzeit.
Dieser ist inspiriert von der „Polynomial Time Difference of Convex
Functions“-Methode (POTDC-Methode). Bezüglich der Summenrate des Systems
untersuchen wir zuletzt, welche Bedingungen erfüllt sein müssen, um einen
Gewinn durch gemeinsames Nutzen zu erhalten. Hiernach untersuchen wir die
Maximierung der Summenrate eines Mehrpaar-TWR-Netzwerkes mit mehreren
Einantennen-AF-Relais und Einantennen-Nutzern. Das daraus resultierende
Problem der Summenraten-Maximierung, gebunden an eine bestimmte
Gesamtsendeleistung aller Relais im Netzwerk, ist ähnlich dem des
vorangegangenen Szenarios. Dementsprechend kann eine optimale Lösung für
das eine Szenario auch für das jeweils andere Szenario genutzt werden.
Weiterhin werden basierend auf dem Polynomialzeitalgorithmus global
optimale Lösungen entwickelt. Diese Lösungen sind entweder an eine
maximale Gesamtsendeleistung aller Relais oder an eine maximale
Sendeleistung jedes einzelnen Relais gebunden. Zusätzlich entwickeln wir
suboptimale Lösungen, die effizient in ihrer Laufzeit sind und eine
Approximation der optimalen Lösung darstellen. Hiernach verlegen wir unser
Augenmerk auf ein Mehrpaar-TWR-Netzwerk mit mehreren Mehrantennen-AF-Relais
und mehreren Repeatern. Solch ein Szenario ist allgemeiner, da die
vorherigen beiden Szenarien als spezielle Realisierungen dieses Szenarios
aufgefasst werden können. Das Interferenz-Management in diesem Szenario
ist herausfordernder aufgrund der vorhandenen Repeater.
Interferenzneutralisierung (IN) stellt eine Lösung dar, um diese Art
Interferenz zu handhaben. Im Zuge dessen werden notwendige und ausreichende
Bedingungen zur Aufhebung der Interferenz hergeleitet. Weiterhin wird ein
Framework entwickelt, dass verschiedene Systemnutzenfunktionen optimiert,
wobei IN im jeweiligen Netzwerk vorhanden sein kann oder auch nicht. Dies
ist unabhängig davon, ob die Relais einer maximalen Gesamtsendeleistung
oder einer individuellen maximalen Sendeleistung unterliegen. Letztendlich
entwickeln wir ein Ãœbertragungsverfahren sowie ein Vorkodier- und
Dekodierverfahren für Basisstationen (BS) in einem TWR-assistierten
Mehrbenutzer-MIMO-Downlink-Kanal. Im Vergleich mit dem
Mehrpaar-TWR-Netzwerk leidet dieses Szenario unter Interferenzen zwischen
den Kanälen. Wir entwickeln drei suboptimale Algorithmen, welche auf
Kanalinversion basieren. ProBaSeMO und „Zero-Forcing Dirty Paper
Coding“ (ZFDPC), welche eine geringe Zeitkomplexität aufweisen, schaffen
eine Balance zwischen Leistungsfähigkeit und Komplexität. Zusätzlich
gibt es jeweils nur geringe Einbrüche in stark beanspruchten
Kommunikationssystemen.Im zweiten Teil untersuchen wir Techniken zur
SI-Unterdrückung, um den FD-Gewinn in einem Punkt-zu-Punkt-System
auszunutzen. Zunächst entwickeln wir ein Übertragungsverfahren, dass auf
SI Rücksicht nimmt und die SI-Unterdrückung gegen den Multiplexgewinn
abwägt. Die besten Ergebnisse werden durch die perfekte Kenntnis des
Kanals erzielt, was praktisch nicht genau der Fall ist. Aus diesem Grund
werden Übertragungstechniken für den „Worst Case“ entwickelt, die den
Kanalschätzfehlern Rechnung tragen. Diese Fehler werden deterministisch
modelliert und durch Ellipsoide beschränkt. In praktischen Szenarien ist
der HF-Schaltkreise nicht perfekt. Dies hat Einfluss auf die Verfahren zur
SI-Unterdrückung und führt zu einer Restselbstinterferenz. Wir entwickeln
effiziente Ãœbertragungstechniken mittels Beamforming, welche auf dem
Signal-zu-Verlust-und-Rausch-Verhältnis (signal to leakage plus noise
ratio [SLNR]) aufbauen, um Unvollkommenheiten der HF-Schaltkreise
auszugleichen. Zusätzlich können alle Designkonzepte auf FD-OWR-Systeme
erweitert werden.To enable ultra-high data rate and ubiquitous coverage in future wireless
networks, new physical layer techniques are desired. Relaying is a
promising technique for future wireless networks since it can boost the
coverage and can provide low cost wireless backhauling solutions, as
compared to traditional wired backhauling solutions via fiber and copper.
Traditional one-way relaying (OWR) techniques suffer from the spectral loss
due to the half-duplex (HD) operation at the relay. On one hand, two-way
relaying (TWR) allows the communication partners to transmit to and/or
receive from the relay simultaneously and thus uses the spectrum more
efficiently than OWR. Therefore, we study two-way relays and more
specifically multi-pair/multi-user TWR systems with amplify-and-forward
(AF) relays. These scenarios suffer from inter-pair or inter-user
interference. To deal with the interference, advanced signal processing
algorithms, in other words, spatial division multiple access (SDMA)
techniques, are desired. On the other hand, if the relay is a full-duplex
(FD) relay, the spectral loss due to a HD operation can also be
compensated. However, in practice, a FD device is hard to realize due to
the strong loop-back self-interference and the limited dynamic range at the
transceiver. Thus, advanced self-interference suppression techniques should
be developed. This thesis contributes to the two goals by developing
optimal and/or efficient algebraic solutions for different scenarios
subject to different utility functions of the system, e.g., sum rate
maximization and transmit power minimization. In the first part of this
thesis, we first study a multi-pair TWR network with a multi-antenna AF
relay. This scenario can be also treated as the sharing of the relay and
the spectrum among multiple operators assuming that different pairs of
users belong to different operators. Existing approaches focus on
interference suppression. We propose a projection based separation of
multiple operators (ProBaSeMO) scheme, which can be easily extended when
each user has multiple antennas or when different system design criteria
are applied. To benchmark the ProBaSeMO scheme, we develop optimal relay
transmit strategies to maximize the system sum rate, minimize the required
transmit power at the relay, or maximize the minimum signal to interference
plus noise ratio (SINR) of the users. Specifically for the sum rate
maximization problem, gradient based methods are developed regardless
whether each user has a single antenna or multiple antennas. To guarantee a
worst-case polynomial time solution, we also develop a polynomial time
algorithm which has been inspired by the polynomial time difference of
convex functions (POTDC) method. Finally, we analyze the conditions for
obtaining the sharing gain in terms of the sum rate. Then we study the sum
rate maximization problem of a multi-pair TWR network with multiple single
antenna AF relays and single antenna users. The resulting sum rate
maximization problem, subject to a total transmit power constraint of the
relays in the network, yields a similar problem structure as in the
previous scenario. Therefore the optimal solution for one scenario can be
used for the other. Moreover, a global optimal solution, which is based on
the polyblock approach, and several suboptimal solutions, which are more
computationally efficient and approximate the optimal solution, are
developed when there is a total transmit power constraint of the relays in
the network or each relay has its own transmit power constraint. We then
shift our focus to a multi-pair TWR network with multiple multi-antenna AF
relays and multiple dumb repeaters. This scenario is more general because
the previous two scenarios can be seen as special realizations of this
scenario. The interference management in this scenario is more challenging
due to the existence of the repeaters. Interference neutralization (IN) is
a solution for dealing with this kind of interference. Thereby, necessary
and sufficient conditions for neutralizing the interference are derived.
Moreover, a general framework to optimize different system utility
functions in this network with or without IN is developed regardless
whether the AF relays in the network have a total transmit power limit or
individual transmit power limits. Finally, we develop the relay transmit
strategy as well as base station (BS) precoding and decoding schemes for a
TWR assisted multi-user MIMO (MU-MIMO) downlink channel. Compared to the
multi-pair TWR network, this scenario suffers from the co-channel
interference. We develop three suboptimal algorithms which are based on
channel inversion, ProBaSeMO and zero-forcing dirty paper coding (ZFDPC),
which has a low computational complexity, provides a balance between the
performance and the complexity, and suffers only a little when the system
is heavily loaded, respectively.In the second part of this thesis, we
investigate self-interference (SI) suppression techniques to exploit the FD
gain for a point-to-point MIMO system. We first develop SI aware transmit
strategies, which provide a balance between the SI suppression and the
multiplexing gain of the system. To get the best performance, perfect
channel state information (CSI) is needed, which is imperfect in practice.
Thus, worst case transmit strategies to combat the imperfect CSI are
developed, where the CSI errors are modeled deterministically and bounded
by ellipsoids. In real word applications, the RF chain is imperfect. This
affects the performance of the SI suppression techniques and thus results
in residual SI. We develop efficient transmit beamforming techniques, which
are based on the signal to leakage plus noise ratio (SLNR) criterion, to
deal with the imperfections in the RF chain. All the proposed design
concepts can be extended to FD OWR systems
Hardware-Conscious Wireless Communication System Design
The work at hand is a selection of topics in efficient wireless communication system design, with topics logically divided into two groups.One group can be described as hardware designs conscious of their possibilities and limitations. In other words, it is about hardware that chooses its configuration and properties depending on the performance that needs to be delivered and the influence of external factors, with the goal of keeping the energy consumption as low as possible. Design parameters that trade off power with complexity are identified for analog, mixed signal and digital circuits, and implications of these tradeoffs are analyzed in detail. An analog front end and an LDPC channel decoder that adapt their parameters to the environment (e.g. fluctuating power level due to fading) are proposed, and it is analyzed how much power/energy these environment-adaptive structures save compared to non-adaptive designs made for the worst-case scenario. Additionally, the impact of ADC bit resolution on the energy efficiency of a massive MIMO system is examined in detail, with the goal of finding bit resolutions that maximize the energy efficiency under various system setups.In another group of themes, one can recognize systems where the system architect was conscious of fundamental limitations stemming from hardware.Put in another way, in these designs there is no attempt of tweaking or tuning the hardware. On the contrary, system design is performed so as to work around an existing and unchangeable hardware limitation. As a workaround for the problematic centralized topology, a massive MIMO base station based on the daisy chain topology is proposed and a method for signal processing tailored to the daisy chain setup is designed. In another example, a large group of cooperating relays is split into several smaller groups, each cooperatively performing relaying independently of the others. As cooperation consumes resources (such as bandwidth), splitting the system into smaller, independent cooperative parts helps save resources and is again an example of a workaround for an inherent limitation.From the analyses performed in this thesis, promising observations about hardware consciousness can be made. Adapting the structure of a hardware block to the environment can bring massive savings in energy, and simple workarounds prove to perform almost as good as the inherently limited designs, but with the limitation being successfully bypassed. As a general observation, it can be concluded that hardware consciousness pays off
Joint signal detection and channel estimation in rank-deficient MIMO systems
L'évolution de la prospère famille des standards 802.11 a encouragé le développement des technologies appliquées aux réseaux locaux sans fil (WLANs). Pour faire face à la toujours croissante nécessité de rendre possible les communications à très haut débit, les systèmes à antennes multiples (MIMO) sont une solution viable. Ils ont l'avantage d'accroître le débit de transmission sans avoir recours à plus de puissance ou de largeur de bande. Cependant, l'industrie hésite encore à augmenter le nombre d'antennes des portables et des accésoires sans fil. De plus, à l'intérieur des bâtiments, la déficience de rang de la matrice de canal peut se produire dû à la nature de la dispersion des parcours de propagation, ce phénomène est aussi occasionné à l'extérieur par de longues distances de transmission. Ce projet est motivé par les raisons décrites antérieurement, il se veut un étude sur la viabilité des transcepteurs sans fil à large bande capables de régulariser la déficience de rang du canal sans fil. On vise le développement des techniques capables de séparer M signaux co-canal, même avec une seule antenne et à faire une estimation précise du canal. Les solutions décrites dans ce document cherchent à surmonter les difficultés posées par le medium aux transcepteurs sans fil à large bande. Le résultat de cette étude est un algorithme transcepteur approprié aux systèmes MIMO à rang déficient
Design of limited feedback for robust MMSE precoding in multiuser MISO systems
[Resumen] En este trabajo consideramos un sistema multiusuario con múltiples antenas en transmisión y una única antena en cada uno de los usuarios receptores y que se denota por brevedad como MU-MISO, del inglés Multi–User Multiple–Input/Single–Output.
Este modelo MU–MISO se ajusta perfectamente al enlace descendente de un sistema de comunicaciones móviles, donde múltiples antenas situadas en la estación base envÃan información a varios usuarios dentro de su zona de cobertura y cuyos terminales móviles disponen generalmente de una única antena. Este canal descendente se denomina también canal de difusión (BC, del inglés Broadcast Channel). Cuando se considera un canal de difusión, el transmisor centralizado tiene claramente más grados de libertad que cada uno de los receptores descentralizados, por lo que es más apropiado separar las señales aplicando precodificación en transmisión. Para poder realizar el diseño de los parámetros del precodificador, el transmisor necesita conocer la información de canal (CSI, en inglés Channel State Information) correspondiente a los distintos usuarios receptores. En el caso de sistemas FDD (del inglés, Frequency Division Duplex), esta información puede obtenerse (al menos parcialmente) mediante realimentación, siempre tras haber aplicado un proceso de cuantificación de la información enviada con el objetivo de adaptarse a las condiciones de ancho de banda limitado del canal de retorno