Adaptive framing based similarity measurement between time warped speech signals using Kalman filter

Similarity measurement between speech signals aims at calculating the degree of similarity using acoustic features that has been receiving much interest due to the processing of large volume of multimedia information. However, dynamic properties of speech signals such as varying silence segments and time warping factor make it more challenging to measure the similarity between speech signals. This manuscript entails further extension of our research towards the adaptive framing based similarity measurement between speech signals using a Kalman filter. Silence removal is enhanced by integrating multiple features for voiced and unvoiced speech segments detection. The adaptive frame size measurement is improved by using the acceleration/deceleration phenomenon of object linear motion. A dominate feature set is used to represent the speech signals along with the pre-calculated model parameters that are set by the offline tuning of a Kalman filter. Performance is evaluated using additional datasets to evaluate the impact of the proposed model and silence removal approach on the time warped speech similarity measurement. Detailed statistical results are achieved indicating the overall accuracy improvement from 91 to 98% that proves the superiority of the extended approach on our previous research work towards the time warped continuous speech similarity measurement

A Novel Approach for Continuous Speech Tracking and Dynamic Time Warping. Adaptive Framing Based Continuous Speech Similarity Measure and Dynamic Time Warping using Kalman Filter and Dynamic State Model

Dynamic speech properties such as time warping, silence removal and background noise interference are the most challenging issues in continuous speech signal matching. Among all of them, the time warped speech signal matching is of great interest and has been a tough challenge for the researchers. An adaptive framing based continuous speech tracking and similarity measurement approach is introduced in this work following a comprehensive research conducted in the diverse areas of speech processing. A dynamic state model is introduced based on system of linear motion equations which models the input (test) speech signal frame as a unidirectional moving object along the template speech signal. The most similar corresponding frame position in the template speech is estimated which is fused with a feature based similarity observation and the noise variances using a Kalman filter. The Kalman filter provides the final estimated frame position in the template speech at current time which is further used for prediction of a new frame size for the next step. In addition, a keyword spotting approach is proposed by introducing wavelet decomposition based dynamic noise filter and combination of beliefs. The Dempster’s theory of belief combination is deployed for the first time in relation to keyword spotting task. Performances for both; speech tracking and keyword spotting approaches are evaluated using the statistical metrics and gold standards for the binary classification. Experimental results proved the superiority of the proposed approaches over the existing methods.The appendices files are not available online

Analysis, interpretation and synthesis of facial expressions

Thesis (Ph. D.)--Massachusetts Institute of Technology, Program in Media Arts & Sciences, 1995.Includes bibliographical references (leaves 121-130).by Irfan Aziz Essa.Ph.D

Novel Framework for Outdoor Mobility Assistance and Auditory Display for Visually Impaired People

Outdoor mobility of Visually Impaired People (VIPs) has always been challenging due to the dynamically varying scenes and environmental states. Variety of systems have been introduced to assist VIPs’ mobility that include sensor mounted canes and use of machine intelligence. However, these systems are not reliable when used to navigate the VIPs in dynamically changing environments. The associated challenges are the robust sensing and avoiding diverse types of obstacles, dynamically modelling the changing environmental states (e.g. moving objects, road-works), and effective communication to interpret the environmental states and hazards. In this paper, we propose an intelligent wearable auditory display framework that will process real-time video and multi-sensor data streams to: a) identify the type of obstacles, b) recognize the surrounding scene/objects and corresponding attributes (e.g. geometry, size, shape, distance from user), c) automatically generate the descriptive information about the recognized obstacle/objects and attributes, d) produce accurate, precise and reliable spatial information and corresponding instructions in audio-visual form to assist and navigate VIPs safely with or without the assistance of traditional means

Beiträge zu breitbandigen Freisprechsystemen und ihrer Evaluation

This work deals with the advancement of wideband hands-free systems (HFS’s) for mono- and stereophonic cases of application. Furthermore, innovative contributions to the corr. field of quality evaluation are made. The proposed HFS approaches are based on frequency-domain adaptive filtering for system identification, making use of Kalman theory and state-space modeling. Functional enhancement modules are developed in this work, which improve one or more of key quality aspects, aiming at not to harm others. In so doing, these modules can be combined in a flexible way, dependent on the needs at hand. The enhanced monophonic HFS is evaluated according to automotive ITU-T recommendations, to prove its customized efficacy. Furthermore, a novel methodology and techn. framework are introduced in this work to improve the prototyping and evaluation process of automotive HF and in-car-communication (ICC) systems. The monophonic HFS in several configurations hereby acts as device under test (DUT) and is thoroughly investigated, which will show the DUT’s satisfying performance, as well as the advantages of the proposed development process. As current methods for the evaluation of HFS’s in dynamic conditions oftentimes still lack flexibility, reproducibility, and accuracy, this work introduces “Car in a Box” (CiaB) as a novel, improved system for this demanding task. It is able to enhance the development process by performing high-resolution system identification of dynamic electro-acoustical systems. The extracted dyn. impulse response trajectories are then applicable to arbitrary input signals in a synthesis operation. A realistic dynamic automotive auralization of a car cabin interior is available for HFS evaluation. It is shown that this system improves evaluation flexibility at guaranteed reproducibility. In addition, the accuracy of evaluation methods can be increased by having access to exact, realistic imp. resp. trajectories acting as a so-called “ground truth” reference. If CiaB is included into an automotive evaluation setup, there is no need for an acoustical car interior prototype to be present at this stage of development. Hency, CiaB may ease the HFS development process. Dynamic acoustic replicas may be provided including an arbitrary number of acoustic car cabin interiors for multiple developers simultaneously. With CiaB, speech enh. system developers therefore have an evaluation environment at hand, which can adequately replace the real environment.Diese Arbeit beschäftigt sich mit der Weiterentwicklung breitbandiger Freisprechsysteme für mono-/stereophone Anwendungsfälle und liefert innovative Beiträge zu deren Qualitätsmessung. Die vorgestellten Verfahren basieren auf im Frequenzbereich adaptierenden Algorithmen zur Systemidentifikation gemäß Kalman-Theorie in einer Zustandsraumdarstellung. Es werden funktionale Erweiterungsmodule dahingehend entwickelt, dass mindestens eine Qualitätsanforderung verbessert wird, ohne andere eklatant zu verletzen. Diese nach Anforderung flexibel kombinierbaren algorithmischen Erweiterungen werden gemäß Empfehlungen der ITU-T (Rec. P.1110/P.1130) in vorwiegend automotiven Testszenarien getestet und somit deren zielgerichtete Wirksamkeit bestätigt. Es wird eine Methodensammlung und ein technisches System zur verbesserten Prototypentwicklung/Evaluation von automotiven Freisprech- und Innenraumkommunikationssystemen vorgestellt und beispielhaft mit dem monophonen Freisprechsystem in diversen Ausbaustufen zur Anwendung gebracht. Daraus entstehende Vorteile im Entwicklungs- und Testprozess von Sprachverbesserungssystem werden dargelegt und messtechnisch verifiziert. Bestehende Messverfahren zum Verhalten von Freisprechsystemen in zeitvarianten Umgebungen zeigten bisher oft nur ein unzureichendes Maß an Flexibilität, Reproduzierbarkeit und Genauigkeit. Daher wird hier das „Car in a Box“-Verfahren (CiaB) entwickelt und vorgestellt, mit dem zeitvariante elektro-akustische Systeme technisch identifiziert werden können. So gewonnene dynamische Impulsantworten können im Labor in einer Syntheseoperation auf beliebige Eingangsignale angewandt werden, um realistische Testsignale unter dyn. Bedingungen zu erzeugen. Bei diesem Vorgehen wird ein hohes Maß an Flexibilität bei garantierter Reproduzierbarkeit erlangt. Es wird gezeigt, dass die Genauigkeit von darauf basierenden Evaluationsverfahren zudem gesteigert werden kann, da mit dem Vorliegen von exakten, realen Impulsantworten zu jedem Zeitpunkt der Messung eine sogenannte „ground truth“ als Referenz zur Verfügung steht. Bei der Einbindung von CiaB in einen Messaufbau für automotive Freisprechsysteme ist es bedeutsam, dass zu diesem Zeitpunkt das eigentliche Fahrzeug nicht mehr benötigt wird. Es wird gezeigt, dass eine dyn. Fahrzeugakustikumgebung, wie sie im Entwicklungsprozess von automotiven Sprachverbesserungsalgorithmen benötigt wird, in beliebiger Anzahl vollständig und mind. gleichwertig durch CiaB ersetzt werden kann

Fast upper body pose estimation for human-robot interaction

This work describes an upper body pose tracker that finds a 3D pose estimate using video sequences obtained from a monocular camera, with applications in human-robot interaction in mind. A novel mixture of Ornstein-Uhlenbeck processes model, trained in a reduced dimensional subspace and designed for analytical tractability, is introduced. This model acts as a collection of mean-reverting random walks that pull towards more commonly observed poses. Pose tracking using this model can be Rao-Blackwellised, allowing for computational efficiency while still incorporating bio-mechanical properties of the upper body. The model is used within a recursive Bayesian framework to provide reliable estimates of upper body pose when only a subset of body joints can be detected. Model training data can be extended through a retargeting process, and better pose coverage obtained through the use of Poisson disk sampling in the model training stage. Results on a number of test datasets show that the proposed approach provides pose estimation accuracy comparable with the state of the art in real time (30 fps) and can be extended to the multiple user case. As a motivating example, this work also introduces a pantomimic gesture recognition interface. Traditional approaches to gesture recognition for robot control make use of predefined codebooks of gestures, which are mapped directly to the robot behaviours they are intended to elicit. These gesture codewords are typically recognised using algorithms trained on multiple recordings of people performing the predefined gestures. Obtaining these recordings can be expensive and time consuming, and the codebook of gestures may not be particularly intuitive. This thesis presents arguments that pantomimic gestures, which mimic the intended robot behaviours directly, are potentially more intuitive, and proposes a transfer learning approach to recognition, where human hand gestures are mapped to recordings of robot behaviour by extracting temporal and spatial features that are inherently present in both pantomimed actions and robot behaviours. A Bayesian bias compensation scheme is introduced to compensate for potential classification bias in features. Results from a quadrotor behaviour selection problem show that good classification accuracy can be obtained when human hand gestures are recognised using behaviour recordings, and that classification using these behaviour recordings is more robust than using human hand recordings when users are allowed complete freedom over their choice of input gestures

Biometrics

Biometrics uses methods for unique recognition of humans based upon one or more intrinsic physical or behavioral traits. In computer science, particularly, biometrics is used as a form of identity access management and access control. It is also used to identify individuals in groups that are under surveillance. The book consists of 13 chapters, each focusing on a certain aspect of the problem. The book chapters are divided into three sections: physical biometrics, behavioral biometrics and medical biometrics. The key objective of the book is to provide comprehensive reference and text on human authentication and people identity verification from both physiological, behavioural and other points of view. It aims to publish new insights into current innovations in computer systems and technology for biometrics development and its applications. The book was reviewed by the editor Dr. Jucheng Yang, and many of the guest editors, such as Dr. Girija Chetty, Dr. Norman Poh, Dr. Loris Nanni, Dr. Jianjiang Feng, Dr. Dongsun Park, Dr. Sook Yoon and so on, who also made a significant contribution to the book

An investigation of the utility of monaural sound source separation via nonnegative matrix factorization applied to acoustic echo and reverberation mitigation for hands-free telephony

In this thesis we investigate the applicability and utility of Monaural Sound Source Separation (MSSS) via Nonnegative Matrix Factorization (NMF) for various problems related to audio for hands-free telephony. We first investigate MSSS via NMF as an alternative acoustic echo reduction approach to existing approaches such as Acoustic Echo Cancellation (AEC). To this end, we present the single-channel acoustic echo problem as an MSSS problem, in which the objective is to extract the users signal from a mixture also containing acoustic echo and noise. To perform separation, NMF is used to decompose the near-end microphone signal onto the union of two nonnegative bases in the magnitude Short Time Fourier Transform domain. One of these bases is for the spectral energy of the acoustic echo signal, and is formed from the in- coming far-end user’s speech, while the other basis is for the spectral energy of the near-end speaker, and is trained with speech data a priori. In comparison to AEC, the speaker extraction approach obviates Double-Talk Detection (DTD), and is demonstrated to attain its maximal echo mitigation performance immediately upon initiation and to maintain that performance during and after room changes for similar computational requirements. Speaker extraction is also shown to introduce distortion of the near-end speech signal during double-talk, which is quantified by means of a speech distortion measure and compared to that of AEC. Subsequently, we address Double-Talk Detection (DTD) for block-based AEC algorithms. We propose a novel block-based DTD algorithm that uses the available signals and the estimate of the echo signal that is produced by NMF-based speaker extraction to compute a suitably normalized correlation-based decision variable, which is compared to a fixed threshold to decide on doubletalk. Using a standard evaluation technique, the proposed algorithm is shown to have comparable detection performance to an existing conventional block-based DTD algorithm. It is also demonstrated to inherit the room change insensitivity of speaker extraction, with the proposed DTD algorithm generating minimal false doubletalk indications upon initiation and in response to room changes in comparison to the existing conventional DTD. We also show that this property allows its paired AEC to converge at a rate close to the optimum. Another focus of this thesis is the problem of inverting a single measurement of a non- minimum phase Room Impulse Response (RIR). We describe the process by which percep- tually detrimental all-pass phase distortion arises in reverberant speech filtered by the inverse of the minimum phase component of the RIR; in short, such distortion arises from inverting the magnitude response of the high-Q maximum phase zeros of the RIR. We then propose two novel partial inversion schemes that precisely mitigate this distortion. One of these schemes employs NMF-based MSSS to separate the all-pass phase distortion from the target speech in the magnitude STFT domain, while the other approach modifies the inverse minimum phase filter such that the magnitude response of the maximum phase zeros of the RIR is not fully compensated. Subjective listening tests reveal that the proposed schemes generally produce better quality output speech than a comparable inversion technique

An investigation of the utility of monaural sound source separation via nonnegative matrix factorization applied to acoustic echo and reverberation mitigation for hands-free telephony

In this thesis we investigate the applicability and utility of Monaural Sound Source Separation (MSSS) via Nonnegative Matrix Factorization (NMF) for various problems related to audio for hands-free telephony. We first investigate MSSS via NMF as an alternative acoustic echo reduction approach to existing approaches such as Acoustic Echo Cancellation (AEC). To this end, we present the single-channel acoustic echo problem as an MSSS problem, in which the objective is to extract the users signal from a mixture also containing acoustic echo and noise. To perform separation, NMF is used to decompose the near-end microphone signal onto the union of two nonnegative bases in the magnitude Short Time Fourier Transform domain. One of these bases is for the spectral energy of the acoustic echo signal, and is formed from the in- coming far-end user’s speech, while the other basis is for the spectral energy of the near-end speaker, and is trained with speech data a priori. In comparison to AEC, the speaker extraction approach obviates Double-Talk Detection (DTD), and is demonstrated to attain its maximal echo mitigation performance immediately upon initiation and to maintain that performance during and after room changes for similar computational requirements. Speaker extraction is also shown to introduce distortion of the near-end speech signal during double-talk, which is quantified by means of a speech distortion measure and compared to that of AEC. Subsequently, we address Double-Talk Detection (DTD) for block-based AEC algorithms. We propose a novel block-based DTD algorithm that uses the available signals and the estimate of the echo signal that is produced by NMF-based speaker extraction to compute a suitably normalized correlation-based decision variable, which is compared to a fixed threshold to decide on doubletalk. Using a standard evaluation technique, the proposed algorithm is shown to have comparable detection performance to an existing conventional block-based DTD algorithm. It is also demonstrated to inherit the room change insensitivity of speaker extraction, with the proposed DTD algorithm generating minimal false doubletalk indications upon initiation and in response to room changes in comparison to the existing conventional DTD. We also show that this property allows its paired AEC to converge at a rate close to the optimum. Another focus of this thesis is the problem of inverting a single measurement of a non- minimum phase Room Impulse Response (RIR). We describe the process by which percep- tually detrimental all-pass phase distortion arises in reverberant speech filtered by the inverse of the minimum phase component of the RIR; in short, such distortion arises from inverting the magnitude response of the high-Q maximum phase zeros of the RIR. We then propose two novel partial inversion schemes that precisely mitigate this distortion. One of these schemes employs NMF-based MSSS to separate the all-pass phase distortion from the target speech in the magnitude STFT domain, while the other approach modifies the inverse minimum phase filter such that the magnitude response of the maximum phase zeros of the RIR is not fully compensated. Subjective listening tests reveal that the proposed schemes generally produce better quality output speech than a comparable inversion technique

Articulatory-WaveNet: Deep Autoregressive Model for Acoustic-to-Articulatory Inversion

Acoustic-to-Articulatory Inversion, the estimation of articulatory kinematics from speech, is an important problem which has received significant attention in recent years. Estimated articulatory movements from such models can be used for many applications, including speech synthesis, automatic speech recognition, and facial kinematics for talking-head animation devices. Knowledge about the position of the articulators can also be extremely useful in speech therapy systems and Computer-Aided Language Learning (CALL) and Computer-Aided Pronunciation Training (CAPT) systems for second language learners. Acoustic-to-Articulatory Inversion is a challenging problem due to the complexity of articulation patterns and significant inter-speaker differences. This is even more challenging when applied to non-native speakers without any kinematic training data. This dissertation attempts to address these problems through the development of up-graded architectures for Articulatory Inversion. The proposed Articulatory-WaveNet architecture is based on a dilated causal convolutional layer structure that improves the Acoustic-to-Articulatory Inversion estimated results for both speaker-dependent and speaker-independent scenarios. The system has been evaluated on the ElectroMagnetic Articulography corpus of Mandarin Accented English (EMA-MAE) corpus, consisting of 39 speakers including both native English speakers and Mandarin accented English speakers. Results show that Articulatory-WaveNet improves the performance of the speaker-dependent and speaker-independent Acoustic-to-Articulatory Inversion systems significantly compared to the previously reported results