1,718 research outputs found
Adaptive Signal Processing Strategy for a Wind Farm System Fault Accommodation
In order to improve the availability of offshore wind farms, thus avoiding unplanned operation and maintenance costs, which can be high for offshore installations, the accommodation of faults in their earlier occurrence is fundamental. This paper addresses the design of an active fault tolerant control scheme that is applied to a wind park benchmark of nine wind turbines, based on their nonlinear models, as well as the wind and interactions between the wind turbines in the wind farm. Note that, due to the structure of the system and its control strategy, it can be considered as a fault tolerant cooperative control problem of an autonomous plant. The controller accommodation scheme provides the on-line estimate of the fault signals generated by nonlinear filters exploiting the nonlinear geometric approach to obtain estimates decoupled from both model uncertainty and the interactions among the turbines. This paper proposes also a data-driven approach to provide these disturbance terms in analytical forms, which are subsequently used for designing the nonlinear filters for fault estimation. This feature of the work, followed by the simpler solution relying on a data-driven approach, can represent the key point when on-line implementations are considered for a viable application of the proposed scheme
Finite-horizon estimation of randomly occurring faults for a class of nonlinear time-varying systems
This paper is concerned with the finite-horizon estimation problem of randomly occurring faults for a class of nonlinear systems whose parameters are all time-varying. The faults are assumed to occur in a random way governed by two sets of Bernoulli distributed white sequences. The stochastic nonlinearities entering the system are described by statistical means that can cover several classes of well-studied nonlinearities. The aim of the problem is to estimate the random faults, over a finite horizon, such that the influence from the exogenous disturbances onto the estimation errors is attenuated at the given level quantified by an H∞-norm in the mean square sense. By using the completing squares method and stochastic analysis techniques, necessary and sufficient conditions are established for the existence of the desired finite-horizon H∞ fault estimator whose parameters are then obtained by solving coupled backward recursive Riccati difference equations (RDEs). A simulation example is utilized to illustrate the effectiveness of the proposed fault estimation method
Active actuator fault-tolerant control of a wind turbine benchmark model
This paper describes the design of an active fault-tolerant control scheme that is applied to the actuator of a
wind turbine benchmark. The methodology is based on adaptive filters obtained via the nonlinear geometric
approach, which allows to obtain interesting decoupling property with respect to uncertainty affecting the
wind turbine system. The controller accommodation scheme exploits the on-line estimate of the actuator
fault signal generated by the adaptive filters. The nonlinearity of the wind turbine model is described by the
mapping to the power conversion ratio from tip-speed ratio and blade pitch angles. This mapping represents
the aerodynamic uncertainty, and usually is not known in analytical form, but in general represented by
approximated two-dimensional maps (i.e. look-up tables). Therefore, this paper suggests a scheme to
estimate this power conversion ratio in an analytical form by means of a two-dimensional polynomial, which
is subsequently used for designing the active fault-tolerant control scheme. The wind turbine power generating
unit of a grid is considered as a benchmark to show the design procedure, including the aspects of
the nonlinear disturbance decoupling method, as well as the viability of the proposed approach. Extensive
simulations of the benchmark process are practical tools for assessing experimentally the features of the
developed actuator fault-tolerant control scheme, in the presence of modelling and measurement errors.
Comparisons with different fault-tolerant schemes serve to highlight the advantages and drawbacks of the
proposed methodology
Integrated fault estimation and accommodation design for discrete-time Takagi-Sugeno fuzzy systems with actuator faults
This paper addresses the problem of integrated robust
fault estimation (FE) and accommodation for discrete-time
Takagi–Sugeno (T–S) fuzzy systems. First, a multiconstrained
reduced-order FE observer (RFEO) is proposed to achieve FE for
discrete-time T–S fuzzy models with actuator faults. Based on the
RFEO, a new fault estimator is constructed. Then, using the information
of online FE, a new approach for fault accommodation
based on fuzzy-dynamic output feedback is designed to compensate
for the effect of faults by stabilizing the closed-loop systems. Moreover,
the RFEO and the dynamic output feedback fault-tolerant
controller are designed separately, such that their design parameters
can be calculated readily. Simulation results are presented to
illustrate our contributions
Distributed fault estimation with randomly occurring uncertainties over sensor networks
This paper is concerned with the distributed fault estimation problem for a class of uncertain stochastic systems over sensor networks. The norm-bounded uncertainty enters into the system in a random way governed by a set of Bernoulli distributed white sequence. The purpose of the addressed problem is to design distributed fault estimators, via available output measurements from not only the individual sensor, but also its neighbouring sensors, such that the fault estimation error converges to zero exponentially in the mean square while the disturbance rejection attenuation is constrained to a give level by means of the H∞ performance index. Intensive stochastic analysis is carried out to obtain sufficient conditions for ensuring the exponential stability as well as prescribed H∞ performance for the overall estimation error dynamics. Simulation results are provided to demonstrate the effectiveness of the proposed fault estimation technique in this paper.This work was supported in part by the National Natural Science Foundation of China [ grant number 61329301], [grant number 61422301], [grant number 61374127]; the Outstanding Youth Science Foundation of Heilongjiang Province [grant number JC2015016]; the Alexander von Humboldt Foundation of Germany
Disturbance observer-based fault-tolerant control for robotic systems with guaranteed prescribed performance
The actuator failure compensation control problem of robotic systems possessing dynamic uncertainties has been investigated in this paper. Control design against partial loss of effectiveness (PLOE) and total loss of effectiveness (TLOE) of the actuator are considered and described, respectively, and a disturbance observer (DO) using neural networks is constructed to attenuate the influence of the unknown disturbance. Regarding the prescribed error bounds as time-varying constraints, the control design method based on barrier Lyapunov function (BLF) is used to strictly guarantee both the steady-state performance and the transient performance. A simulation study on a two-link planar manipulator verifies the effectiveness of the proposed controllers in dealing with the prescribed performance, the system uncertainties, and the unknown actuator failure simultaneously. Implementation on a Baxter robot gives an experimental verification of our controller
Integrated fault estimation and fault-tolerant control for stochastic systems with Brownian motions
This paper presents an integrated robust fault estimation and fault‐tolerant control technique for stochastic systems subjected to Brownian parameter perturbations. The augmented system approach, unknown input observer method, and optimization technique are integrated to achieve robust simultaneous estimates of the system states and the means of faults concerned. Meanwhile, a robust fault‐tolerant control strategy is developed by using actuator and sensor signal compensation techniques. Stochastic linear time‐invariant systems, stochastic systems with Lipschitz nonlinear constraint, and stochastic systems with quadratic inner‐bounded nonlinear constraint are respectively investigated, and the corresponding fault‐tolerant control algorithms are addressed. Finally, the effectiveness of the proposed fault‐tolerant control techniques is demonstrated via the drivetrain system of a 4.8 MW benchmark wind turbine, a 3‐tank system, and a numerical nonlinear model
Digital flight control systems
The design of stable feedback control laws for sampled-data systems with variable rate sampling was investigated. These types of sampled-data systems arise naturally in digital flight control systems which use digital actuators where it is desirable to decrease the number of control computer output commands in order to save wear and tear of the associated equipment. The design of aircraft control systems which are optimally tolerant of sensor and actuator failures was also studied. Detection of the failed sensor or actuator must be resolved and if the estimate of the state is used in the control law, then it is also desirable to have an estimator which will give the optimal state estimate even under the failed conditions
Adaptive Robust Actuator Fault Accommodation for a Class of Uncertain Nonlinear Systems with Unknown Control Gains
An adaptive robust fault tolerant control approach is proposed for a class of uncertain nonlinear systems with unknown signs of high-frequency gain and unmeasured states. In the recursive design, neural networks are employed to approximate the unknown nonlinear functions, K-filters are designed to estimate the unmeasured states, and a dynamical signal and Nussbaum gain functions are introduced to handle the unknown sign of the virtual control direction. By incorporating the switching function σ algorithm, the adaptive backstepping scheme developed in this paper does not require the real value of the actuator failure. It is mathematically proved that the proposed adaptive robust fault tolerant control approach can guarantee that all the signals of the closed-loop system are bounded, and the output converges to a small neighborhood of the origin. The effectiveness of the proposed approach is illustrated by the simulation examples
Active fault-tolerant control for an internet-based networked three-tank system
This brief is concerned with the active fault-tolerant control (FTC) problem for an Internet-based networked three-tank system (INTTS) serving as a benchmark system for evaluating networked FTC algorithms. The INTTS has two parts located at Tsinghua University in China and at the University of South Wales in the U.K., respectively, which are connected via the Internet. With the INTTS as an experimental platform, the active FTC problem is investigated for a class of nonlinear networked systems subject to partial actuator failures. Once a specific actuator failure is detected and confirmed by a fault diagnosis unit, the control law is then reconfigured based on the information of the detected fault. Both the stability and the acceptable H∞ disturbance attenuation level are guaranteed for the closed-loop system using the remaining reliable actuators. Extensive experiments are carried out on the active FTC problem of the INTTS with partial actuator failures, and the effectiveness of the proposed scheme is illustrated.The work of X. He was supported in part by the Natural Science Foundation of China (NSFC) under Grant 61473163 and Grant 61522309 and in part by the Tsinghua University Initiative Scientific Research Program. The work of Z. Wang was supported by NSFC under Grant 61273156. The work of D. H. Zhou was supported in part by NSFC under Grant 61290324 and Grant 61490701 and in part by the Research Fund for the Taishan Scholar Project of Shandong Province of China. Recommended by Associate Editor L. Xie
- …