Implementation of a Neuromorphic Development Platform with DANNA

Neuromorphic computing is the use of artificial neural networks to solve complex problems. The specialized computing field has been growing in interest during the past few years. Specialized hardware that function as neural networks can be utilized to solve specific problems unsuited for traditional computing architectures such as pattern classification and image recognition. However, these hardware platforms have neural network structures that are static, being limited to only perform a specific application, and cannot be used for other tasks. In this paper, the feasibility of a development platform utilizing a dynamic artificial neural network for researchers is discussed

Automated application-specific optimisation of interconnects in multi-core systems

In embedded computer systems there are often tasks, implemented as stand-alone devices, that are both application-specific and compute intensive. A recurring problem in this area is to design these application-specific embedded systems as close to the power and efficiency envelope as possible. Work has been done on optimizing singlecore systems and memory organisation, but current methods for achieving system design goals are proving limited as the system capabilities and system size increase in the multi- and many-core era. To address this problem, this thesis investigates machine learning approaches to managing the design space presented in the interconnect design of embedded multi-core systems. The design space presented is large due to the system scale and level of interconnectivity, and also feature inter-dependant parameters, further complicating analysis. The results presented in this thesis demonstrate that machine learning approaches, particularly wkNN and random forest, work well in handling the complexity of the design space. The benefits of this approach are in automation, saving time and effort in the system design phase as well as energy and execution time in the finished system

Fault-tolerant satellite computing with modern semiconductors

Miniaturized satellites enable a variety space missions which were in the past infeasible, impractical or uneconomical with traditionally-designed heavier spacecraft. Especially CubeSats can be launched and manufactured rapidly at low cost from commercial components, even in academic environments. However, due to their low reliability and brief lifetime, they are usually not considered suitable for life- and safety-critical services, complex multi-phased solar-system-exploration missions, and missions with a longer duration. Commercial electronics are key to satellite miniaturization, but also responsible for their low reliability: Until 2019, there existed no reliable or fault-tolerant computer architectures suitable for very small satellites. To overcome this deficit, a novel on-board-computer architecture is described in this thesis.Robustness is assured without resorting to radiation hardening, but through software measures implemented within a robust-by-design multiprocessor-system-on-chip. This fault-tolerant architecture is component-wise simple and can dynamically adapt to changing performance requirements throughout a mission. It can support graceful aging by exploiting FPGA-reconfiguration and mixed-criticality.  Experimentally, we achieve 1.94W power consumption at 300Mhz with a Xilinx Kintex Ultrascale+ proof-of-concept, which is well within the powerbudget range of current 2U CubeSats. To our knowledge, this is the first COTS-based, reproducible on-board-computer architecture that can offer strong fault coverage even for small CubeSats.European Space AgencyComputer Systems, Imagery and Medi

Low power data-dependent transform video and still image coding

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1999.Includes bibliographical references (p. 139-144).This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.This work introduces the idea of data dependent video coding for low power. Algorithms for the Discrete Cosine Transform (DCT) and its inverse are introduced which exploit statistical properties of the input data in both the space and spatial frequency domains in order to minimize the total number of arithmetic operations. Two VLSI chips have been built as a proof-of-concept of data dependent processing implementing the DCT and its inverse (IDCT). The IDCT core processor exploits the presence of a large number of zerovalued spectral coefficients in the input stream when stimulated with MPEG-compressed video sequences. Adata-driven IDCT computation algorithm along with clock gating techniques are used to reduce the number of arithmetic operations for video inputs. The second chip is a DCT core processor that exhibits two innovative techniques for arithmetic operation reduction in the DCT computation context along with standard voltage scaling techniques such as pipelining and parallelism. The first method reduces the bitwidth of arithmetic operations in the presence of data spatial correlation. The second method trades off power dissipation and image compression quality (arithmetic precision.) Both chips are fully functional and exhibit the lowest switched capacitance per sample among past DCT/IDCT chips reported in the literature. Their power dissipation profile shows a strong dependence with certain statistical properties of the data that they operate on, according to the design goal.by Thucydides Xanthopoulos.Ph.D

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Experimental Evaluation and Comparison of Time-Multiplexed Multi-FPGA Routing Architectures

Emulating large complex designs require multi-FPGA systems (MFS). However, inter-FPGA communication is confronted by the challenge of lack of interconnect capacity due to limited number of FPGA input/output (I/O) pins. Serializing parallel signals onto a single trace effectively addresses the limited I/O pin obstacle. Besides the multiplexing scheme and multiplexing ratio (number of inter-FPGA signals per trace), the choice of the MFS routing architecture also affect the critical path latency. The routing architecture of an MFS is the interconnection pattern of FPGAs, fixed wires and/or programmable interconnect chips. Performance of existing MFS routing architectures is also limited by off-chip interface selection. In this dissertation we proposed novel 2D and 3D latency-optimized time-multiplexed MFS routing architectures. We used rigorous experimental approach and real sequential benchmark circuits to evaluate and compare the proposed and existing MFS routing architectures. This research provides a new insight into the encouraging effects of using off-chip optical interface and three dimensional MFS routing architectures. The vertical stacking results in shorter off-chip links improving the overall system frequency with the additional advantage of smaller footprint area. The proposed 3D architectures employed serialized interconnect between intra-plane and inter-plane FPGAs to address the pin limitation problem. Additionally, all off-chip links are replaced by optical fibers that exhibited latency improvement and resulted in faster MFS. Results indicated that exploiting third dimension provided latency and area improvements as compared to 2D MFS. We also proposed latency-optimized planar 2D MFS architectures in which electrical interconnections are replaced by optical interface in same spatial distribution. Performance evaluation and comparison showed that the proposed architectures have reduced critical path delay and system frequency improvement as compared to conventional MFS. We also experimentally evaluated and compared the system performance of three inter-FPGA communication schemes i.e. Logic Multiplexing, SERDES and MGT in conjunction with two routing architectures i.e. Completely Connected Graph (CCG) and TORUS. Experimental results showed that SERDES attained maximum frequency than the other two schemes. However, for very high multiplexing ratios, the performance of SERDES & MGT became comparable

EKKO: an open-source RISC-V soft-core microcontroller

Dissertação de mestrado em Engenharia Eletrónica Industrial e Computadores (especialização em Sistemas Embebidos e Computadores)Com o surgimento da Internet das Coisas (IoT em inglês) nos últimos anos, o número de “coisas” conectadas está a crescer a um ritmo bastante rápido. Estes dispositivos tornaram-se rapidamente parte do nosso dia a dia e já podem ser encontrados nos mais diversos domínios de aplicação, tais como, telecomunicações, saúde, agricultura, e automação industrial. Devido a este crescimento exponencial, a demanda por sistemas embebidos é cada vez maior, trazendo assim diversos desafios no seu desenvolvimento. De todos os desafios, o time-to-market e os custos de desenvolvimento são de inegável importância, logo, a escolha de uma plataforma de desenvolvimento adequada é essencial no desenho destes sistemas. Devido a este novo paradigma, o grupo de investigação da Universidade do Minho onde esta dissertação se insere tem desenvolvido aplicações neste domínio. No entanto, as atuais plataformas de desenvolvimento utilizadas são complexas, têm custos associados e são de código fechado. Por estas razões, o grupo de investigação tem interesse em ter a sua própria plataforma de desenvolvimento. De modo a solucionar os problemas enumerados acima, esta dissertação tem como objetivo desenvolver uma plataforma de desenvolvimento tanto para hardware como para software. A plataforma deve ser simples de utilizar e open-source, reduzindo assim os custos e a tornando a gestão de licenças mais simples. Para além disto, o facto de o sistema ser de código aberto faz também com que este possa ser facilmente estendido e customizado de acordo com os requisitos da aplicação. Neste sentido, esta dissertação apresenta um soft-core microcontroller, o qual contem um processador RISC-V, uma RAM, uma unidade de depuração, um temporizador, um periférico I2C e um barra mento AXI. Em adição, este contem também um kit de desenvolvimento de software (SDK em inglês), o qual inclui um depurador, a opção de utilizar o sistema operativo Azure RTOS ThreadX, e outras ferramentas importantes, tornando o ciclo de desenvolvimento mais fácil, rápido e seguro.With the advent of the Internet of Things (IoT) in most recent years, the number of connected “things” is increasing quickly. These devices rapidly became part of our daily lives and can be found in the most different applications domains, such as telecommunications, health care, agriculture and industrial automation. With this exponential growth, the demand for embedded devices is increasing, bringing several challenges to the development of these systems. From these challenges, the time-to-market and development costs are undeniable extremely important. Thus, choosing a suitable development platform is essential when designing an embedded system. Due to this new paradigm, the University of Minho research group where this dissertation fits has been developing applications in this domain. However, the current development platforms are complex, have associated costs and are closed-source. For these reasons, the research group has interesting in having its development platform. To solve these problems, this dissertation aims to build a development platform for both hardware and software. The platform must be simple and open-source, reducing development costs and simplifying license management. Besides, due to its open nature, it will also be easier to extend and modify the system according to the application’s needs. In this context, this dissertation presents EKKO, an open-source soft-core microcontroller that contains a RISC-V core, an on-chip RAM, a debug unit, a timer and an I2C peripheral, and an AXI bus. In addition, it also contains a Software Development Kit (SDK), which includes a debugger, the option to use Azure RTOS ThreadX, and other crucial tools, turning the development cycle more accessible, faster and safer

Automated Hardware Prototyping for 3D Network on Chips

Vor mehr als 50 Jahren stellte Intel® Mitbegründer Gordon Moore eine Prognose zum Entwicklungsprozess der Transistortechnologie auf. Er prognostizierte, dass sich die Zahl der Transistoren in integrierten Schaltungen alle zwei Jahre verdoppeln wird. Seine Aussage ist immer noch gültig, aber ein Ende von Moores Gesetz ist in Sicht. Mit dem Ende von Moore’s Gesetz müssen neue Aspekte untersucht werden, um weiterhin die Leistung von integrierten Schaltungen zu steigern. Zwei mögliche Ansätze für "More than Moore” sind 3D-Integrationsverfahren und heterogene Systeme. Gleichzeitig entwickelt sich ein Trend hin zu Multi-Core Prozessoren, basierend auf Networks on chips (NoCs). Neben dem Ende des Mooreschen Gesetzes ergeben sich bei immer kleiner werdenden Technologiegrößen, vor allem jenseits der 60 nm, neue Herausforderungen. Eine Schwierigkeit ist die Wärmeableitung in großskalierten integrierten Schaltkreisen und die daraus resultierende Überhitzung des Chips. Um diesem Problem in modernen Multi-Core Architekturen zu begegnen, muss auch die Verlustleistung der Netzwerkressourcen stark reduziert werden. Diese Arbeit umfasst eine durch Hardware gesteuerte Kombination aus Frequenzskalierung und Power Gating für 3D On-Chip Netzwerke, einschließlich eines FPGA Prototypen. Dafür wurde ein Takt-synchrones 2D Netzwerk auf ein dreidimensionales asynchrones Netzwerk mit mehreren Frequenzbereichen erweitert. Zusätzlich wurde ein skalierbares Online-Power-Management System mit geringem Ressourcenaufwand entwickelt. Die Verifikation neuer Hardwarekomponenten ist einer der zeitaufwendigsten Schritte im Entwicklungsprozess hochintegrierter digitaler Schaltkreise. Um diese Aufgabe zu beschleunigen und um eine parallele Softwareentwicklung zu ermöglichen, wurde im Rahmen dieser Arbeit ein automatisiertes und benutzerfreundliches Tool für den Entwurf neuer Hardware Projekte entwickelt. Eine grafische Benutzeroberfläche zum Erstellen des gesamten Designablaufs, vom Erstellen der Architektur, Parameter Deklaration, Simulation, Synthese und Test ist Teil dieses Werkzeugs. Zudem stellt die Größe der Architektur für die Erstellung eines Prototypen eine besondere Herausforderung dar. Frühere Arbeiten haben es versäumt, eine schnelles und unkompliziertes Prototyping, insbesondere von Architekturen mit mehr als 50 Prozessorkernen, zu realisieren. Diese Arbeit umfasst eine Design Space Exploration und FPGA-basierte Prototypen von verschiedenen 3D-NoC Implementierungen mit mehr als 80 Prozessoren