126 research outputs found

    A novel random wireless packet multiple access method using CDMA

    Full text link

    Some aspects of a code division multiple access local area network

    Get PDF
    Not Availabl

    Future benefits and applications of intelligent on-board processing to VSAT services

    Get PDF
    The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified

    Packet CDMA communication without preamble

    Get PDF
    Code-Division Multiple-Access (CDMA) is one of the leading digital wireless communication methods currently employed throughout the world. Third generation (3G) and future wireless CDMA systems are required to provide services to a large number of users where each user sends data burst only occasionally. The preferred approach is packet based CDMA so that many users share the same physical channel simultaneously. In CDMA, each user is assigned a pseudo-random (PN) code sequence. PN codephase synchronization between received signals and a locally generated replica by the receiver is one of the fundamental requirements for successful implementation of any CDMA technique. The customary approach is to start each CDMA packet with a synchronization preamble which consists of PN code without data modulation. Packets with preambles impose overheads for communications in CDMA systems especially for short packets such as mouse-clicks or ATM packets of a few hundred bits. Thus, it becomes desirable to perform PN codephase synchronization using the information-bearing signal without a preamble. This work uses a segmented matched filter (SMF) which is capable of acquiring PN codephase in the presence of data modulation. Hence the preamble can be eliminated, reducing the system overhead. Filter segmentation is also shown to increase the tolerance to Doppler shift and local carrier frequency offset. Computer simulations in MATLAB® were carried out to determine various performance measures of the acquisition system. Substantial improvement in probability of correct codephase detection in the presence of multiple-access interference and data modulation is obtained by accumulating matched filter samples over several code cycles prior to making the codephase decision. Correct detection probabilities exceeding 99% are indicated from simulations with 25 co-users and 10 kHz carrier frequency offset or Doppler shift by accumulating five or more PN code cycles, using maximum selection detection criterion. Analysis and simulation also shows that cyclic accumulation can improve packet throughput by 50% and by as much as 100% under conditions of high offered traffic and Doppler shift for both fixed capacity and infinite capacity systems

    Traffic integration in personal, local and geograhical wireless networks

    Get PDF
    Currently, users identify wireless networks with the first and second generation of cellular-telephony networks. Although voice and short messaging have driven the success of these networks so far, data and more sophisticated applications are emerging as the future driving forces for the extensive deployment of new wireless technologies. In this chapter we will consider future wireless technologies that will provide support to different types of traffic including legacy voice applications, Internet data traffic, and sophisticated multimedia applications. In the near future, wireless technologies will span from broadband wide-area technologies (such as satellite-based network and cellular networks) to local and personal area networks. Hereafter, for each class of networks, we will present the emerging wireless technologies for supporting service integration. Our overview will start by analyzing the Bluetooth technology that is the de-facto standard for Wireless Personal Area Networks (WPANs), i.e. networks that connect devices placed inside a circle with radius of 10 meters. Two main standards exist for Wireless Local Area Networks (WLANs): IEEE 802. and HiperLAN. In this chapter we focus on the IEEE 802.11 technology, as it is the technology currently available on the market. In this chapter, after a brief description of the IEEE 802.11 architecture, we will focus on the mechanisms that have been specifically designed to support delay sensitive traffics

    Design and Implementation of Wireless Modules for Farm Monitoring

    Get PDF
    Since the last quarter of the 20th century, technological advancement in the industry has grown exponentially, likewise the agricultural sector. The extent is as far as the use of drones and automated robots on farms. Today wireless automation has become very popular in homes and industries alike since they are considered more efficient, safe and financially viable. Microcontroller applications in the area of wireless automation is very advanced considering the cheap cost compared to PLCs and the general cheap cost of electronic components has driven more funds into researching and further industrializing microcontroller technology. The aim of this Master's Thesis "Design and Implementation of Wireless Modules for Farm Monitoring" was to plan, design, construct and implement wireless modules to be used to automate, control and monitor a farm. The modules consists of two nodes, each equipped with RF modules to enable communication between the nodes wirelessly. One of the nodes is also connected to a computer (the raspberry pi), enabling access to the modules remotely via internet. This Master's Thesis describes the software and hardware tasks necessary for the total operation of the modules such as the control of IOs, communication between the wireless nodes and the control of the nodes via internet. Range measurement results and throughput measurements were also discussed.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

    Technology Assessment for the Future Aeronautical Communications System

    Get PDF
    To address emerging saturation in the VHF aeronautical bands allocated internationally for air traffic management communications, the International Civil Aviation Organization (ICAO) has requested development of a common global solution through its Aeronautical Communications Panel (ACP). In response, the Federal Aviation Administration (FAA) and Eurocontrol initiated a joint study, with the support of NASA and U.S. and European contractors, to provide major findings on alternatives and recommendations to the ICAO ACP Working Group C (WG-C). Under an FAA/Eurocontrol cooperative research and development agreement, ACP WG-C Action Plan 17 (AP-17), commonly referred to as the Future Communications Study (FCS), NASA Glenn Research Center is responsible for the investigation of potential communications technologies that support the long-term mobile communication operational concepts of the FCS. This report documents the results of the first phase of the technology assessment and recommendations referred to in the Technology Pre-Screening Task 3.1 of AP-17. The prescreening identifies potential technologies that are under development in the industry and provides an initial assessment against a harmonized set of evaluation criteria that address high level capabilities, projected maturity for the time frame for usage in aviation, and potential applicability to aviation. A wide variety of candidate technologies were evaluated from several communications service categories including: cellular telephony; IEEE-802.xx standards; public safety radio; satellite and over-the-horizon communications; custom narrowband VHF; custom wideband; and military communications

    Technology Directions for the 21st Century

    Get PDF
    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services

    Co-Channel Interference Between IEEE 802.11 WLAN and Bluetooth

    Get PDF
    Electrical Engineering Technolog
    • …
    corecore