Compact Models for Integrated Circuit Design

This modern treatise on compact models for circuit computer-aided design (CAD) presents industry standard models for bipolar-junction transistors (BJTs), metal-oxide-semiconductor (MOS) field-effect-transistors (FETs), FinFETs, and tunnel field-effect transistors (TFETs), along with statistical MOS models. Featuring exercise problems at the end of each chapter and extensive references at the end of the book, the text supplies fundamental and practical knowledge necessary for efficient integrated circuit (IC) design using nanoscale devices. It ensures even those unfamiliar with semiconductor physics gain a solid grasp of compact modeling concepts

MODELING AND SPICE IMPLEMENTATION OF SILICON-ON-INSULATOR (SOI) FOUR GATE (G4FET) TRANSISTOR

As the device dimensions have reduced from micrometer to nanometer range, new bulk silicon devices are now facing many undesirable effects of scaling leading device engineers to look for new process technologies. Silicon-on-insulator (SOI) has emerged as a very promising candidate for resolving the major problems plaguing the bulk silicon technology. G4FET [G4FET] is a SOI transistor with four independent gates. Although G4FET has already shown great potential in different applications, the widespread adoption of a technology in circuit design is heavily dependent upon good SPICE (Simulation Program with Integrated Circuit Emphasis) models. CAD (Computer Aided Design) tools are now ubiquitous in circuit design and a fast, robust and accurate SPICE model is absolutely necessary to transform G4FET into a mainstream technology. The research goal is to develop suitable SPICE models for G4FET to aid circuit designers in designing innovative analog and digital circuits using this new transistor. The first phase of this work is numerical modeling of the G4FET where four different numerical techniques are implemented, each with its merits and demerits. The first two methods are based on multivariate Lagrange interpolation and multidimensional Bernstein polynomial. The third numerical technique is based on multivariate regression polynomial to aid modeling with dense gridded data. Another suitable alternative namely multidimensional linear and cubic spline interpolation is explored as the fourth numerical modeling approach to solve some of the problems resulting from single polynomial approximation. The next phase of modeling involves developing a macromodel combining already existing SPICE models of MOSFET (metal–oxide–semiconductor field-effect transistor) and JFET (junction-gate field-effect transistor). This model is easy to implement in circuit simulators and provides good results compared to already demonstrated experimental works with innovative G4FET circuits. The final phase of this work involves the development of a physics-based compact model of G4FET with some empirical fitting parameters. A model for depletion-all-around operation is implemented in circuit simulator based on previous work. Another simplified model, combining MOS and JFET action, is implemented in circuit simulator to model the accumulation mode operation of G4FET

Strain-Engineered MOSFETs

This book brings together new developments in the area of strain-engineered MOSFETs using high-mibility substrates such as SIGe, strained-Si, germanium-on-insulator and III-V semiconductors into a single text which will cover the materials aspects, principles, and design of advanced devices, their fabrication and applications. The book presents a full TCAD methodology for strain-engineering in Si CMOS technology involving data flow from process simulation to systematic process variability simulation and generation of SPICE process compact models for manufacturing for yield optimization

A surface-potential-based compact model for partially-depleted silicon-on-insulator MOSFETs

With the continuous scaling of CMOS technologies, Silicon-on-Insulator (SOI) technologies have become more competitive compared to bulk, due to their lower parasitic capacitances and leakage currents. The shift towards high frequency, low power circuitry, coupled with the increased maturity of SOI process technologies, have made SOI a genuinely costeffective solution for leading edge applications. The original STAG2 model, developed at the University of Southampton, UK, was among the first compact circuit simulation models to specifically model the behaviour of Partially-Depleted (PD) SOI devices. STAG2 was a robust, surface-potential based compact model, employing closed-form equations to minimise simulation times for large circuits. It was able to simulate circuits in DC, small signal, and transient modes, and particular care was taken to ensure that convergence problems were kept to a minimum. In this thesis, the ongoing development of the STAG model, culminating in the release of a new version, STAG3, is described. STAG3 is intended to make the STAG model applicable to process technologies down to 100nm. To this end, a number of major model improvements were undertaken, including: a new core surface potential model, new vertical and lateral field mobility models, quantum mechanical models, the ability to model non-uniform vertical doping profiles, and other miscellaneous effects relevant to deep submicron devices such as polysilicon depletion, velocity overshoot, and the reverse short channel effect.As with the previous versions of STAG, emphasis has been placed on ensuring that model equations are numerically robust, as well as closed-form wherever possible, in order to minimise convergence problems and circuit simulation times. The STAG3 model has been evaluated with devices manufactured in PD-SOI technologies down to 0.25?m, and was found to give good matching to experimental data across a range of device sizes and biases, whilst requiring only a single set of model parameters

Compact modeling of the rf and noise behavior of multiple-gate mosfets

La reducción de la tecnología MOSFET planar ha sido la opción tecnológica dominante en las últimas décadas. Sin embargo, hemos llegado a un punto en el que los materiales y problemas en los dispositivos surgen, abriendo la puerta para estructuras alternativas de los dispositivos. Entre estas estructuras se encuentran los dispositivos DG, SGT y Triple-Gate. Estas tres estructuras están estudiadas en esta tesis, en el contexto de rducir las dimensiones de los dispositivos a tamaños tales que los mecanismos cuánticos y efectos de calan coro deben tenerse n cuenta. Estos efectos vienen con una seria de desafíos desde el pun to de vista de modelación, unos de los más grandes siendo el tiempo y los recursos comprometidos para ejecutar las simulaciones. para resolver este problema, esta tesis propone modelos comlets analíticos y compactos para cada una de las geometrías, validos desde DC hasta el modo de operación en Rf para los nodos tecnológicos futuros. Dichos modelos se han extendido para analizar el ruido de alta frecuencia en estos diapositivos

Design of a reliability methodology: Modelling the influence of temperature on gate Oxide reliability

An Integrated Reliability Methodology (IRM) is presented that encompasses the changes that technology growth has brought with it and includes several new device degradation models. Each model is based on a physics of failure approach and includes on the effects of temperature. At all stages the models are verified experimentally on modern deep sub-micron devices. The research provides the foundations of a tool which gives the user the opportunity to make appropriate trade-offs between performance and reliability, and that can be implemented in the early stages of product development