Design and application of reconfigurable circuits and systems

Open Acces

A Methodology to Design Pipelined Simulated Annealing Kernel Accelerators on Space-Borne Field-Programmable Gate Arrays

Increased levels of science objectives expected from spacecraft systems necessitate the ability to carry out fast on-board autonomous mission planning and scheduling. Heterogeneous radiation-hardened Field Programmable Gate Arrays (FPGAs) with embedded multiplier and memory modules are well suited to support the acceleration of scheduling algorithms. A methodology to design circuits specifically to accelerate Simulated Annealing Kernels (SAKs) in event scheduling algorithms is shown. The main contribution of this thesis is the low complexity scoring calculation used for the heuristic mapping algorithm used to balance resource allocation across a coarse-grained pipelined data-path. The methodology was exercised over various kernels with different cost functions and problem sizes. These test cases were benchedmarked for execution time, resource usage, power, and energy on a Xilinx Virtex 4 LX QR 200 FPGA and a BAE RAD 750 microprocessor

Framework for Simulation of Heterogeneous MpSoC for Design Space Exploration

Due to the ever-growing requirements in high performance data computation, multiprocessor systems have been proposed to solve the bottlenecks in uniprocessor systems. Developing efficient multiprocessor systems requires effective exploration of design choices like application scheduling, mapping, and architecture design. Also, fault tolerance in multiprocessors needs to be addressed. With the advent of nanometer-process technology for chip manufacturing, realization of multiprocessors on SoC (MpSoC) is an active field of research. Developing efficient low power, fault-tolerant task scheduling, and mapping techniques for MpSoCs require optimized algorithms that consider the various scenarios inherent in multiprocessor environments. Therefore there exists a need to develop a simulation framework to explore and evaluate new algorithms on multiprocessor systems. This work proposes a modular framework for the exploration and evaluation of various design algorithms for MpSoC system. This work also proposes new multiprocessor task scheduling and mapping algorithms for MpSoCs. These algorithms are evaluated using the developed simulation framework. The paper also proposes a dynamic fault-tolerant (FT) scheduling and mapping algorithm for robust application processing. The proposed algorithms consider optimizing the power as one of the design constraints. The framework for a heterogeneous multiprocessor simulation was developed using SystemC/C++ language. Various design variations were implemented and evaluated using standard task graphs. Performance evaluation metrics are evaluated and discussed for various design scenarios

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

MULTI-OBJECTIVE DESIGN AUTOMATION FOR RECONFIGURABLE MULTI-PROCESSOR SYSTEMS

Ph.DDOCTOR OF PHILOSOPH

Design synthesis for dynamically reconfigurable logic systems

Dynamic reconfiguration of logic circuits has been a research problem for over four decades. While applications using logic reconfiguration in practical scenarios have been demonstrated, the design of these systems has proved to be a difficult process demanding the skills of an experienced reconfigurable logic design expert. This thesis proposes an automatic synthesis method which relieves designers of some of the difficulties associated with designing partially dynamically reconfigurable systems. A new design abstraction model for reconfigurable systems is proposed in order to support design exploration using the presented method. Given an input behavioural model, a technology server and a set of design constraints, the method will generate a reconfigurable design solution in the form of a 3D floorplan and a configuration schedule. The approach makes use of genetic algorithms. It facilitates global optimisation to accommodate multiple design objectives common in reconfigurable system design, while making realistic estimates of configuration overheads and of the potential for resource sharing between configurations. A set of custom evolutionary operators has been developed to cope with a multiple-objective search space. Furthermore, the application of a simulation technique verifying the lll results of such an automatic exploration is outlined in the thesis. The qualities of the proposed method are evaluated using a set of benchmark designs taking data from a real reconfigurable logic technology. Finally, some extensions to the proposed method and possible research directions are discussed

Integrated support for Adaptivity and Fault-tolerance in MPSoCs

The technology improvement and the adoption of more and more complex applications in consumer electronics are forcing a rapid increase in the complexity of multiprocessor systems on chip (MPSoCs). Following this trend, MPSoCs are becoming increasingly dynamic and adaptive, for several reasons. One of these is that applications are getting intrinsically dynamic. Another reason is that the workload on emerging MPSoCs cannot be predicted because modern systems are open to new incoming applications at run-time. A third reason which calls for adaptivity is the decreasing component reliability associated with technology scaling. Components below the 32-nm node are more inclined to temporal or even permanent faults. In case of a malfunctioning system component, the rest of the system is supposed to take over its tasks. Thus, the system adaptivity goal shall influence several de- sign decisions, that have been listed below: 1) The applications should be specified such that system adaptivity can be easily supported. To this end, we consider Polyhedral Process Networks (PPNs) as model of computation to specify applications. PPNs are composed by concurrent and autonomous processes that communicate between each other using bounded FIFO channels. Moreover, in PPNs the control is completely distributed, as well as the memories. This represents a good match with the emerging MPSoC architectures, in which processing elements and memories are usually distributed. Most importantly, the simple operational semantics of PPNs allows for an easy adoption of system adaptivity mechanisms. 2) The hardware platform should guarantee the flexibility that adaptivity mechanisms require. Networks-on-Chip (NoCs) are emerging communication infrastructures for MPSoCs that, among many other advantages, allow for system adaptivity. This is because NoCs are generic, since the same platformcan be used to run different applications, or to run the same application with different mapping of processes. However, there is a mismatch between the generic structure of the NoCs and the semantics of the PPN model. Therefore, in this thesis we investigate and propose several communication approaches to overcome this mismatch. 3) The system must be able to change the process mapping at run-time, using process migration. To this end, a process migration mechanism has been proposed and evaluated. This mechanism takes into account specific requirements of the embedded domain such as predictability and efficiency. To face the problem of graceful degradation of the system, we enriched the MADNESS NoC platform by adding fault tolerance support at both software and hardware level. The proposed process migration mechanism can be exploited to cope with permanent faults by migrating the processes running on the faulty processing element. A fast heuristic is used to determine the new mapping of the processes to tiles. The experimental results prove that the overhead in terms of execution time, due to the execution time of the remapping heuristic, together with the actual process migration, is almost negligible compared to the execution time of the whole application. This means that the proposed approach allows the system to change its performance metrics and to react to faults without a substantial impact on the user experience

Integrated support for Adaptivity and Fault-tolerance in MPSoCs

The technology improvement and the adoption of more and more complex applications in consumer electronics are forcing a rapid increase in the complexity of multiprocessor systems on chip (MPSoCs). Following this trend, MPSoCs are becoming increasingly dynamic and adaptive, for several reasons. One of these is that applications are getting intrinsically dynamic. Another reason is that the workload on emerging MPSoCs cannot be predicted because modern systems are open to new incoming applications at run-time. A third reason which calls for adaptivity is the decreasing component reliability associated with technology scaling. Components below the 32-nm node are more inclined to temporal or even permanent faults. In case of a malfunctioning system component, the rest of the system is supposed to take over its tasks. Thus, the system adaptivity goal shall influence several de- sign decisions, that have been listed below: 1) The applications should be specified such that system adaptivity can be easily supported. To this end, we consider Polyhedral Process Networks (PPNs) as model of computation to specify applications. PPNs are composed by concurrent and autonomous processes that communicate between each other using bounded FIFO channels. Moreover, in PPNs the control is completely distributed, as well as the memories. This represents a good match with the emerging MPSoC architectures, in which processing elements and memories are usually distributed. Most importantly, the simple operational semantics of PPNs allows for an easy adoption of system adaptivity mechanisms. 2) The hardware platform should guarantee the flexibility that adaptivity mechanisms require. Networks-on-Chip (NoCs) are emerging communication infrastructures for MPSoCs that, among many other advantages, allow for system adaptivity. This is because NoCs are generic, since the same platformcan be used to run different applications, or to run the same application with different mapping of processes. However, there is a mismatch between the generic structure of the NoCs and the semantics of the PPN model. Therefore, in this thesis we investigate and propose several communication approaches to overcome this mismatch. 3) The system must be able to change the process mapping at run-time, using process migration. To this end, a process migration mechanism has been proposed and evaluated. This mechanism takes into account specific requirements of the embedded domain such as predictability and efficiency. To face the problem of graceful degradation of the system, we enriched the MADNESS NoC platform by adding fault tolerance support at both software and hardware level. The proposed process migration mechanism can be exploited to cope with permanent faults by migrating the processes running on the faulty processing element. A fast heuristic is used to determine the new mapping of the processes to tiles. The experimental results prove that the overhead in terms of execution time, due to the execution time of the remapping heuristic, together with the actual process migration, is almost negligible compared to the execution time of the whole application. This means that the proposed approach allows the system to change its performance metrics and to react to faults without a substantial impact on the user experience

Self-adaptivity of applications on network on chip multiprocessors: the case of fault-tolerant Kahn process networks

Technology scaling accompanied with higher operating frequencies and the ability to integrate more functionality in the same chip has been the driving force behind delivering higher performance computing systems at lower costs. Embedded computing systems, which have been riding the same wave of success, have evolved into complex architectures encompassing a high number of cores interconnected by an on-chip network (usually identified as Multiprocessor System-on-Chip). However these trends are hindered by issues that arise as technology scaling continues towards deep submicron scales. Firstly, growing complexity of these systems and the variability introduced by process technologies make it ever harder to perform a thorough optimization of the system at design time. Secondly, designers are faced with a reliability wall that emerges as age-related degradation reduces the lifetime of transistors, and as the probability of defects escaping post-manufacturing testing is increased. In this thesis, we take on these challenges within the context of streaming applications running in network-on-chip based parallel (not necessarily homogeneous) systems-on-chip that adopt the no-remote memory access model. In particular, this thesis tackles two main problems: (1) fault-aware online task remapping, (2) application-level self-adaptation for quality management. For the former, by viewing fault tolerance as a self-adaptation aspect, we adopt a cross-layer approach that aims at graceful performance degradation by addressing permanent faults in processing elements mostly at system-level, in particular by exploiting redundancy available in multi-core platforms. We propose an optimal solution based on an integer linear programming formulation (suitable for design time adoption) as well as heuristic-based solutions to be used at run-time. We assess the impact of our approach on the lifetime reliability. We propose two recovery schemes based on a checkpoint-and-rollback and a rollforward technique. For the latter, we propose two variants of a monitor-controller- adapter loop that adapts application-level parameters to meet performance goals. We demonstrate not only that fault tolerance and self-adaptivity can be achieved in embedded platforms, but also that it can be done without incurring large overheads. In addressing these problems, we present techniques which have been realized (depending on their characteristics) in the form of a design tool, a run-time library or a hardware core to be added to the basic architecture

High-level synthesis of triple modular redundant FPGA circuits with energy efficient error recovery mechanisms

There is a growing interest in deploying commercial SRAM-based Field Programmable Gate Array (FPGA) circuits in space due to their low cost, reconfigurability, high logic capacity and rich I/O interfaces. However, their configuration memory (CM) is vulnerable to ionising radiation which raises the need for effective fault-tolerant design techniques. This thesis provides the following contributions to mitigate the negative effects of soft errors in SRAM FPGA circuits. Triple Modular Redundancy (TMR) with periodic CM scrubbing or Module-based CM error recovery (MER) are popular techniques for mitigating soft errors in FPGA circuits. However, this thesis shows that MER does not recover CM soft errors in logic instantiated outside the reconfigurable regions of TMR modules. To address this limitation, a hybrid error recovery mechanism, namely FMER, is proposed. FMER uses selective periodic scrubbing and MER to recover CM soft errors inside and outside the reconfigurable regions of TMR modules, respectively. Experimental results indicate that TMR circuits with FMER achieve higher dependability with less energy consumption than those using periodic scrubbing or MER alone. An imperative component of MER and FMER is the reconfiguration control network (RCN) that transfers the minority reports of TMR components, i.e., which, if any, TMR module needs recovery, to the FPGA's reconfiguration controller (RC). Although several reliable RCs have been proposed, a study of reliable RCNs has not been previously reported. This thesis fills this research gap, by proposing a technique that transfers the circuit's minority reports to the RC via the configuration-layer of the FPGA. This reduces the resource utilisation of the RCN and therefore its failure rate. Results show that the proposed RCN achieves higher reliability than alternative RCN architectures reported in the literature. The last contribution of this thesis is a high-level synthesis (HLS) tool, namely TLegUp, developed within the LegUp HLS framework. TLegUp triplicates Xilinx 7-series FPGA circuits during HLS rather than during the register-transfer level pre- or post-synthesis flow stage, as existing computer-aided design tools do. Results show that TLegUp can generate non-partitioned TMR circuits with 500x less soft error sensitivity than non-triplicated functional equivalent baseline circuits, while utilising 3-4x more resources and having 11% lower frequency