An Extended CMOS ISFET Model Incorporating the Physical Design Geometry and the Effects on Performance and Offset Variation

This paper presents an extended model for the CMOS-based ion-sensitive field-effect transistor, incorporating design parameters associated with the physical geometry of the device. This can, for the first time, provide a good match between calculated and measured characteristics by taking into account the effects of nonidealities such as threshold voltage variation and sensor noise. The model is evaluated through a number of devices with varying design parameters (chemical sensing area and MOSFET dimensions) fabricated in a commercially available 0.35-µm CMOS technology. Threshold voltage, subthreshold slope, chemical sensitivity, drift, and noise were measured and compared with the simulated results. The first- and second-order effects are analyzed in detail, and it is shown that the sensors' performance was in agreement with the proposed model

Cryogenic Characterization of 180 nm CMOS Technology at 100 mK

Conventional CMOS technology operated at cryogenic conditions has recently attracted interest for its uses in low-noise electronics. We present one of the first characterizations of 180 nm CMOS technology at a temperature of 100 mK, extracting I/V characteristics, threshold voltages, and transconductance values, as well as observing their temperature dependence. We find that CMOS devices remain fully operational down to these temperatures, although we observe hysteresis effects in some devices. The measurements described in this paper can be used to inform the future design of CMOS devices intended to be operated in this deep cryogenic regime

Product assurance technology for custom LSI/VLSI electronics

The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification

Statistical modelling of nano CMOS transistors with surface potential compact model PSP

The development of a statistical compact model strategy for nano-scale CMOS transistors is presented in this thesis. Statistical variability which arises from the discreteness of charge and granularity of matter plays an important role in scaling of nano CMOS transistors especially in sub 50nm technology nodes. In order to achieve reasonable performance and yield in contemporary CMOS designs, the statistical variability that affects the circuit/system performance and yield must be accurately represented by the industry standard compact models. As a starting point, predictive 3D simulation of an ensemble of 1000 microscopically different 35nm gate length transistors is carried out to characterize the impact of statistical variability on the device characteristics. PSP, an advanced surface potential compact model that is selected as the next generation industry standard compact model, is targeted in this study. There are two challenges in development of a statistical compact model strategy. The first challenge is related to the selection of a small subset of statistical compact model parameters from the large number of compact model parameters. We propose a strategy to select 7 parameters from PSP to capture the impact of statistical variability on current-voltage characteristics. These 7 parameters are used in statistical parameter extraction with an average RMS error of less than 2.5% crossing the whole operation region of the simulated transistors. Moreover, the accuracy of statistical compact model extraction strategy in reproducing the MOSFET electrical figures of merit is studied in detail. The results of the statistical compact model extraction are used for statistical circuit simulation of a CMOS inverter under different input-output conditions and different number of statistical parameters. The second challenge in the development of statistical compact model strategy is associated with statistical generation of parameters preserving the distribution and correlation of the directly extracted parameters. By using advanced statistical methods such as principal component analysis and nonlinear power method, the accuracy of parameter generation is evaluated and compared to directly extracted parameter sets. Finally, an extension of the PSP statistical compact model strategy to different channel width/length devices is presented. The statistical trends of parameters and figures of merit versus channel width/length are characterized

A novel non-intrusive technique for BTI characterization in SiC MOSFETs

Threshold voltage ( $V_{TH}$ ) shift due to Bias Temperature Instability (BTI) is a well-known problem in SiC-MOSFETs that occurs due to oxide traps in the $SiC/SiO_2$ gate interface. The reduced band offsets and increased interface/fixed oxide traps in SiC-MOSFETs makes this a more critical problem compared to silicon. Before qualification, power devices are subjected to gate bias stress tests after which $V_{TH}$ shift is monitored. However, some recovery occurs between the end of the stress and $V_{TH}$ characterisation, thereby potentially under-estimating the extent of the problem. In applications where the SiC-MOSFET is turned OFF with a negative bias at high temperature, if $V_{TH}$ shift is severe enough there may be electrothermal failure due to current crowding since parallel devices lose synchronization during turn-ON. In this paper, a novel method that uses the forward voltage of the body diode during reverse conduction of a small sensing current is introduced as a technique for monitoring $V_{TH}$ shift and recovery due to BTI. This non-invasive method exploits the increased body effect that is peculiar SiC-MOSFETs due to the higher body diode forward voltage. With the proposed method, it is possible to non-invasively assess $V_{TH}$ shift dynamically during BTI characterization tests

Simulation of charge-trapping in nano-scale MOSFETs in the presence of random-dopants-induced variability

The growing variability of electrical characteristics is a major issue associated with continuous downscaling of contemporary bulk MOSFETs. In addition, the operating conditions brought about by these same scaling trends have pushed MOSFET degradation mechanisms such as Bias Temperature Instability (BTI) to the forefront as a critical reliability threat. This thesis investigates the impact of this ageing phenomena, in conjunction with device variability, on key MOSFET electrical parameters. A three-dimensional drift-diffusion approximation is adopted as the simulation approach in this work, with random dopant fluctuations—the dominant source of statistical variability—included in the simulations. The testbed device is a realistic 35 nm physical gate length n-channel conventional bulk MOSFET. 1000 microscopically different implementations of the transistor are simulated and subjected to charge-trapping at the oxide interface. The statistical simulations reveal relatively rare but very large threshold voltage shifts, with magnitudes over 3 times than that predicted by the conventional theoretical approach. The physical origin of this effect is investigated in terms of the electrostatic influences of the random dopants and trapped charges on the channel electron concentration. Simulations with progressively increased trapped charge densities—emulating the characteristic condition of BTI degradation—result in further variability of the threshold voltage distribution. Weak correlations of the order of 10-2 are found between the pre-degradation threshold voltage and post-degradation threshold voltage shift distributions. The importance of accounting for random dopant fluctuations in the simulations is emphasised in order to obtain qualitative agreement between simulation results and published experimental measurements. Finally, the information gained from these device-level physical simulations is integrated into statistical compact models, making the information available to circuit designers

Static and dynamic modelling for IGZO-TFT devices with high-k multilayer dielectric

Indium-Gallium-Zinc-Oxide thin-film transistors (IGZO-TFT) are a strong alternative technology for the current trend of Si based field-effect transistor (FET) for flat-panel display backplane and internet of things internet of things (IoT). In these applications, comprehensive understanding and accurate modelling of thin-film transistor (TFT) is compulsory for systematic circuit design. In this study, IGZO-TFTs with high- multilayer dielectric, which were previously fabricated at CENIMAT/I3N Portugal are characterized in the University of Cambridge at the department of electrical engineering. Alongside this characterization, it is developed a compact static model that is capable of describing above-threshold linear behaviour. This model is based on physical parameters and also accounts the effects of contact resistance in source and drain terminals. Furthermore, it is developed a dynamic small signals model, based on conventional FET models and its validity is studied with the help of S-Parameters and capacitance-voltage characteristics (C-V) characteristics. The great advantage of the developed models, in both static and dynamic aspects, is the low number of parameters required to be extracted physically with good fitting results. This can empower new users that are not so familiar with the modelling aspect to design simple electrical circuits with IGZO-TFTs

Work Function Extraction of Indium Tin Oxide Used As Transparent Gate Electrode For MOSFET.

Recent commercialization has peaked interest in transparent conducting oxides being implemented in display technology. Indium Tin Oxide (ITO) is a popular transparent conducting oxide which has been utilized as high work function electrode in liquid crystal displays, solar cells, gas sensors and heat reflecting films. Indium Tin Oxide films exhibit excellent transmission characteristics in the visible and infrared spectrum while maintaining high electrical conductivity. High work function electrodes are used to inject holes into organic materials. In majority applications the ITO work function has an impact on the device performance as it affects the energy barrier height at the hetero-junction interface. Hence, the work function of ITO is of critical importance. In this thesis, the work function of ITO is extracted successfully from a Metal Oxide Semiconductor Field Effect Transistor (MOSFET) device for the first time. Two MOSFET devices are fabricated using a four level mask under exact same conditions. Aluminum metal is used as a drain and source contact for both MOSFETs. One of the MOSFET has aluminum gate contact and transparent conducting ITO is used as gate contact for the second MOSFET. From the threshold voltage equation of both the fabricated MOSFETs, work function of ITO is extracted. Further optical transmission studies of ITO performed in the visible spectra are also reported in this study