Marine baseline and monitoring strategies for Carbon Dioxide Capture and Storage (CCS)

The QICS controlled release experiment demonstrates that leaks of carbon dioxide (CO2) gas can be detected by monitoring acoustic, geochemical and biological parameters within a given marine system. However the natural complexity and variability of marine system responses to (artificial) leakage strongly suggests that there are no absolute indicators of leakage or impact that can unequivocally and universally be used for all potential future storage sites. We suggest a multivariate, hierarchical approach to monitoring, escalating from anomaly detection to attribution, quantification and then impact assessment, as required. Given the spatial heterogeneity of many marine ecosystems it is essential that environmental monitoring programmes are supported by a temporally (tidal, seasonal and annual) and spatially resolved baseline of data from which changes can be accurately identified. In this paper we outline and discuss the options for monitoring methodologies and identify the components of an appropriate baseline survey

Monitoring the condition of Marine Renewable Energy Devices through underwater acoustic emissions: Case study of a wave energy converter in Falmouth Bay, UK

Abstract Maintaining the engineering health of Marine Renewable Energy Devices (MREDs) is one of the main limits to their economic viability, because of the requirement for costly marine interventions in challenging conditions. Acoustic Emission (AE) condition monitoring is routinely and successfully used for land-based devices, and this paper shows how it can be used underwater. We review the acoustic signatures expected from operation and likely failure modes of MREDs, providing a basis for a generic classification system. This is illustrated with a Wave Energy Converter tested at Falmouth Bay (UK), monitored for 2 years. Underwater noise levels have been measured between 10 Hz and 32 kHz throughout this time, covering operational and inactive periods. Broadband MRED contributions to ambient noise are generally negligible. Time-frequency analyses are used to detect acoustic signatures (60 Hz–5 kHz) of specific operational activities, such as the active Power Take Off, and relate them to engineering and environmental conditions. These first results demonstrate the feasibility of using underwater Acoustic Emissions to monitor the health and performance of MREDs.JW is funded by the Natural Environment Research Council (NERC grant NE/L002434/1) as part of the GW4+ Doctoral Training Partnership (http://www.nercgw4plus.ac.uk/). IB is funded through the SuperGen UK Centre for Marine Energy Research (EPSRC grant EP/M014738/1). The authors would also like to thank M.J. Witt (U. Exeter) for his invaluable assistance with acoustic data collection [14] and [15], funded by ESF, PRIMaRE, MERiFIC, TSB and Fred Olsen Renewables

Modular Autonomous Biosampler (MAB)- A prototype system for distinct biological size-class sampling and preservation

Presently, there is a community wide deficiency in our ability to collect and preserve multiple size-class biologic samples across a broad spectrum of oceanographic platforms (e.g. AUVs, ROVs, and Ocean Observing System Nodes). This is particularly surprising in comparison to the level of instrumentation that now exists for acquiring physical and geophysical data (e.g. side-scan sonar, current profiles etc.), from these same platforms. We present our effort to develop a low-cost, high sample capacity modular,autonomous biological sampling device (MAB). The unit is designed for filtering and preserving 3 distinct biological size-classes (including bacteria), and is deployable in any aquatic setting from a variety of platform modalities (AUV, ROV, or mooring)

A Self-Contained Subsea Platform for Acoustic Monitoring of the Environment Around Marine Renewable Energy Devices-Field Deployments at Wave and Tidal Energy Sites in Orkney, Scotland

The drive towards sustainable energy has seen rapid development of marine renewable energy devices (MREDs). The NERC/Defra collaboration FLOw, Water column and Benthic ECology 4-D (FLOWBEC-4D) is investigating the environmental and ecological effects of installing and operating wave and tidal energy devices. The FLOWBEC sonar platform combines several instruments to record information at a range of physical and multitrophic levels for durations of two weeks to capture an entire spring-neap tidal cycle. An upward-facing multifrequency Simrad EK60 echosounder is synchronized with an upward-facing Imagenex Delta T multibeam sonar. An acoustic Doppler velocimeter (ADV) provides local current measurements and a fluorometer measures chlorophyll (as a proxy for phytoplankton) and turbidity. The platform is self-contained, facilitating rapid deployment and recovery in high-energy sites and flexibility in gathering baseline data. Five 2-week deployments were completed in 2012 and 2013 at wave and tidal energy sites, both in the presence and absence of renewable energy structures at the European Marine Energy Centre (EMEC), Orkney, U.K. Algorithms for target tracking have been designed and compared with concurrent, shore-based seabird observations used to ground truth the acoustic data. The depth preference and interactions of birds, fish schools and marine mammals with MREDs can be tracked to assess whether individual animals face collision risks with tidal stream turbines, and how animals generally interact with MREDs. These results can be used to guide marine spatial planning, device design, licensing and operation, as different device types are tested, as individual devices are scaled up to arrays, and as new sites are considered

Field deployments of a self-contained subsea platform for acoustic monitoring of the environment around marine renewable energy structurea

The drive towards sustainable energy has seen rapid development of marine renewable energy devices, and current efforts are focusing on wave and tidal stream energy. The NERC/DEFRA collaboration FLOWBEC-4D (Flow, Water column & Benthic Ecology 4D) is addressing the lack of knowledge of the environmental and ecological effects of installing and operating large arrays of wave and tidal energy devices. The FLOWBEC sonar platform combines a number of instruments to record information at a range of physical and multi-trophic levels. Data are recorded at a resolution of several measurements per second, for durations of 2 weeks to capture an entire spring-neap tidal cycle. An upward-facing multifrequency Simrad EK60 echosounder (38, 120 and 200 kHz) is synchronized with an upward-facing Imagenex 837B Delta T multibeam sonar (120° × 20° beamwidth, 260 kHz) aligned with the tidal flow. An ADV is used for local current measurements and a fluorometer is used to measure chlorophyll (as a proxy for plankton) and turbidity. The platform is self-contained with no cables or anchors, facilitating rapid deployment and recovery in high-energy sites and flexibility in allowing baseline data to be gathered. Five 2-week deployments were completed in 2012 and 2013 at wave and tidal energy sites, both in the presence and absence of renewable energy structures. These surveys were conducted at the European Marine Energy Centre, Orkney, UK. Algorithms for noise removal, target detection and target tracking have been written using a combination of LabVIEW, MATLAB and Echoview. Target morphology, behavior and frequency response are used to aid target classification, with concurrent shore-based seabird observations used to ground truth the acoustic data. Using this information, the depth preference and interactions of birds, fish schools and marine mammals with renewable energy structures can be tracked. Seabird and mammal dive profiles, predator-prey interactions a- d the effect of hydrodynamic processes during foraging events throughout the water column can also be analyzed. These datasets offer insights into how fish, seabirds and marine mammals successfully forage within dynamic marine habitats and also whether individuals face collision risks with tidal stream turbines. Measurements from the subsea platform are complemented by 3D hydrodynamic model data and concurrent shore-based marine X-band radar. This range of concurrent fine-scale information across physical and trophic levels will improve our understanding of how the fine-scale physical influence of currents, waves and turbulence at tidal and wave energy sites affect the behavior of marine wildlife, and how tidal and wave energy devices might alter the behavior of such wildlife. Together, the results from these deployments increase our environmental understanding of the physical and ecological effects of installing and operating marine renewable energy devices. These results can be used to guide marine spatial planning, device design, licensing and operation, as individual devices are scaled up to arrays and new sites are considered. The combination of our current technology and analytical approach can help to de-risk the licensing process by providing a higher level of certainty about the behavior of a range of mobile marine species in high energy environments. It is likely that this approach will lead to greater mechanistic understanding of how and why mobile predators use these high energy areas for foraging. If a fuller understanding and quantification can be achieved at single demonstration scales, and these are found to be similar, then the predictive power of the outcomes might lead to a wider strategic approach to monitoring and possibly lead to a reduction in the level of monitoring required at each commercial site

Sensor enclosures: example application and implications for data coherence

Sensors deployed in natural environments, such as rivers, beaches and glaciers, experience large forces and damaging environmental conditions. Sensors need to be robust, securely operate for extended time periods and be readily relocated and serviced. The sensors must be housed in materials that mimic natural conditions of size, density, shape and roughness. We have developed an encasement system for sensors required to measure large forces experienced by mobile river sediment grains. Sensors are housed within two discrete cases that are rigidly conjoined. The inner case exactly fits the sensor, radio components and power source. This case can be mounted within outer cases of any larger size and can be precisely moulded to match the shapes of natural sediment. Total grain mass can be controlled by packing the outer case with dense material. Case design uses Solid-WorksTM software, and shape-matching involved 3D laser scanning of natural pebbles. The cases were printed using a HP DesignjetTM 3D printer that generates high precision parts that lock rigidly in place. The casings are watertight and robust. Laboratory testing produces accurate results over a wider range of accelerations than previously reported

Integrated tool for the acoustic assessment and monitoring of marine activities and operations

Peer ReviewedPostprint (author’s final draft

Freshwater ecoacoustics as a tool for continuous ecosystem monitoring

Copyright by the Ecological Society of AmericaPassive acoustic monitoring is gaining popularity in ecology as a practical and non-invasive approach to surveying ecosystems. This technique is increasingly being used to monitor terrestrial systems, particularly bird populations, given that it can help to track temporal dynamics of populations and ecosystem health without the need for expensive resampling. We suggest that underwater acoustic monitoring presents a viable, non-invasive, and largely unexplored approach to monitoring freshwater ecosystems, yielding information about three key ecological elements of aquatic environments – (1) fishes, (2) macroinvertebrates, and (3) physicochemical processes – as well as providing data on anthropogenic noise levels. We survey the literature on this approach, which is substantial but scattered across disciplines, and call for more cross-disciplinary work on recording and analysis techniques. We also discuss technical issues and knowledge gaps, including background noise, spatiotemporal variation, and the need for centralized reference collection repositories. These challenges need to be overcome before the full potential of passive acoustics in dynamic detection of biophysical processes can be realized and used to inform conservation practitioners and managers

NEMO-SN1 Abyssal Cabled Observatory in the Western Ionian Sea

The NEutrinoMediterranean Observatory—Submarine Network 1 (NEMO-SN1) seafloor observatory is located in the central Mediterranean Sea, Western Ionian Sea, off Eastern Sicily (Southern Italy) at 2100-m water depth, 25 km from the harbor of the city of Catania. It is a prototype of a cabled deep-sea multiparameter observatory and the first one operating with real-time data transmission in Europe since 2005. NEMO-SN1 is also the first-established node of the European Multidisciplinary Seafloor Observatory (EMSO), one of the incoming European large-scale research infrastructures included in the Roadmap of the European Strategy Forum on Research Infrastructures (ESFRI) since 2006. EMSO will specifically address long-term monitoring of environmental processes related to marine ecosystems, marine mammals, climate change, and geohazards