Waveform-Defined Security: A Low-Cost Framework for Secure Communications

Communication security could be enhanced at physical layer but at the cost of complex algorithms and redundant hardware, which would render traditional physical layer security (PLS) techniques unsuitable for use with resource-constrained communication systems. This work investigates a waveform-defined security (WDS) framework, which differs fundamentally from traditional PLS techniques used in today’s systems. The framework is not dependent on channel conditions such as signal power advantage and channel state information (CSI). Therefore, the framework is more reliable than channel dependent beamforming and artificial noise (AN) techniques. In addition, the framework is more than just increasing the cost of eavesdropping. By intentionally tuning waveform patterns to weaken signal feature diversity and enhance feature similarity, eavesdroppers will not be able to identify correctly signal formats. The wrong classification of signal formats would result in subsequent detection errors even when an eavesdropper uses brute-force detection techniques. To get a robust WDS framework, three impact factors, namely training data feature, oversampling factor and bandwidth compression factor (BCF) offset, are investigated. An optimal WDS waveform pattern is obtained at the end after a joint study of the three factors. To ensure a valid eavesdropping model, artificial intelligence (AI) dependent signal classifiers are designed followed by optimal performance achievable signal detectors. To show the compatibility in available communication systems, the WDS framework is successfully integrated in IEEE 802.11a with nearly no adding computational complexity. Finally, a low-cost software-defined radio (SDR) experiment is designed to verify the feasibility of the WDS framework in resource-constrained communications

Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER

Non-linear echo cancellation - a Bayesian approach

Echo cancellation literature is reviewed, then a Bayesian model is introduced and it is shown how how it can be used to model and fit nonlinear channels. An algorithm for cancellation of echo over a nonlinear channel is developed and tested. It is shown that this nonlinear algorithm converges for both linear and nonlinear channels and is superior to linear echo cancellation for canceling an echo through a nonlinear echo-path channel

Energy Efficient VLSI Circuits for MIMO-WLAN

Mobile communication - anytime, anywhere access to data and communication services - has been continuously increasing since the operation of the first wireless communication link by Guglielmo Marconi. The demand for higher data rates, despite the limited bandwidth, led to the development of multiple-input multiple-output (MIMO) communication which is often combined with orthogonal frequency division multiplexing (OFDM). Together, these two techniques achieve a high bandwidth efficiency. Unfortunately, techniques such as MIMO-OFDM significantly increase the signal processing complexity of transceivers. While fast improvements in the integrated circuit (IC) technology enabled to implement more signal processing complexity per chip, large efforts had and have to be done for novel algorithms as well as for efficient very large scaled integration (VLSI) architectures in order to meet today's and tomorrow's requirements for mobile wireless communication systems. In this thesis, we will present architectures and VLSI implementations of complete physical (PHY) layer application specific integrated circuits (ASICs) under the constraints imposed by an industrial wireless communication standard. Contrary to many other publications, we do not elaborate individual components of a MIMO-OFDM communication system stand-alone, but in the context of the complete PHY layer ASIC. We will investigate the performance of several MIMO detectors and the corresponding preprocessing circuits, being integrated into the entire PHY layer ASIC, in terms of achievable error-rate, power consumption, and area requirement. Finally, we will assemble the results from the proposed PHY layer implementations in order to enhance the energy efficiency of a transceiver. To this end, we propose a cross-layer optimization of PHY layer and medium access control (MAC) layer

大規模システムLSI設計のための統一的ハードウェア・ソフトウェア協調検証手法

Currently, the complexity of embedded LSI system is growing faster than the productivity of system design. This trend results in a design productivity gap, particularly in tight development time. Since the verification task takes bigger part of development task, it becomes a major challenge in LSI system design. In order to guarantee system reliability and quality of results (QoR), verifying large coverage of system functionality requires huge amount of relevant test cases and various scenario of evaluations. To overcome these problems, verification methodology is evolving toward supporting higher level of design abstraction by employing HW-SW co-verification. In this study, we present a novel approach for verification LSI circuit which is called as unified HW/SW co-verification framework. The study aims to improve design efficiency while maintains implementation consistency in the point of view of system-level performance. The proposed data-driven simulation and flexible interface of HW and SW design become the backbone of verification framework. In order to avoid time consuming, prone error, and iterative design spin-off in a large team, the proposed framework has to support multiple design abstractions. Hence, it can close the loop of design, exploration, optimization, and testing. Furthermore, the proposed methodology is also able to co-operate with system-level simulation in high-level abstraction, which is easy to extend for various applications and enables fast-turn around design modification. These contributions are discussed in chapter 3. In order to show the effectiveness and the use-cases of the proposed verification framework, the evaluation and metrics assessments of Very High Throughput wireless LAN system design are carried out. Two application examples are provided. The first case in chapter 4 is intended for fast verification and design exploration of large circuit. The Maximum Likelihood Detection (MLD) MIMO decoder is considered as Design Under Test (DUT). The second case, as presented in chapter 5, is the evaluation for system-level simulation. The full transceiver system based on IEEE 802.11ac standard is employed as DUT. Experimental results show that the proposed verification approach gives significant improvements of verification time (e.g. up to 10,000 times) over the conventional scheme. The proposed framework is also able to support various schemes of system level evaluations and cross-layer evaluation of wireless system.九州工業大学博士学位論文 学位記番号：情工博甲第328号 学位授与年月日：平成29年6月30日1 Introduction|2 Design and Verification in LSI System Design|3 Unified HW/SW Co-verification Methodology|4 Fast Co-verification and Design Exploration in Complex Circuits|5 Unified System Level Simulator for Very High Throughput Wireless Systems|6 Conclusion and Future Work九州工業大学平成29年

MIMOPack: A High Performance Computing Library for MIMO Communication Systems

[EN] Nowadays, several communication standards are emerging and evolving, searching higher transmission rates, reliability and coverage. This expansion is primarily driven by the continued increase in consumption of mobile multimedia services due to the emergence of new handheld devices such as smartphones and tablets. One of the most significant techniques employed to meet these demands is the use of multiple transmit and receive antennas, known as MIMO systems. The use of this technology allows to increase the transmission rate and the quality of the transmission through the use of multiple antennas at the transmitter and receiver sides. MIMO technologies have become an essential key in several wireless standards such as WLAN, WiMAX and LTE. These technologies will be incorporated also in future standards, therefore is expected in the coming years a great deal of research in this field. Clearly, the study of MIMO systems is critical in the current investigation, however the problems that arise from this technology are very complex. High Performance Computing (HPC) systems, and specifically, modern hardware architectures as multi-core and many-cores (e.g Graphics Processing Units (GPU)) are playing a key role in the development of efficient and low-complexity algorithms for MIMO transmissions. Proof of this is that the number of scientific contributions and research projects related to its use has increased in the last years. Also, some high performance libraries have been implemented as tools for researchers involved in the development of future communication standards. Two of the most popular libraries are: IT++ that is a library based on the use of some optimized libraries for multi-core processors and the Communications System Toolbox designed for use with MATLAB, which uses GPU computing. However, there is not a library able to run on a heterogeneous platform using all the available resources. In view of the high computational requirements in MIMO application research and the shortage of tools able to satisfy them, we have made a special effort to develop a library to ease the development of adaptable parallel applications in accordance with the different architectures of the executing platform. The library, called MIMOPack, aims to implement efficiently using parallel computing, a set of functions to perform some of the critical stages of MIMO communication systems simulation. The main contribution of the thesis is the implementation of efficient Hard and Soft output detectors, since the detection stage is considered the most complex part of the communication process. These detectors are highly configurable and many of them include preprocessing techniques that reduce the computational cost and increase the performance. The proposed library shows three important features: portability, efficiency and easy of use. Current realease allows GPUs and multi-core computation, or even simultaneously, since it is designed to use on heterogeneous machines. The interface of the functions are common to all environments in order to simplify the use of the library. Moreover, some of the functions are callable from MATLAB increasing the portability of developed codes between different computing environments. According to the library design and the performance assessment, we consider that MIMOPack may facilitate industrial and academic researchers the implementation of scientific codes without having to know different programming languages and machine architectures. This will allow to include more complex algorithms in their simulations and obtain their results faster. This is particularly important in the industry, since the manufacturers work to analyze and to propose their own technologies with the aim that it will be approved as a standard. Thus allowing to enforce their intellectual property rights over their competitors, who should obtain the corresponding licenses to include these technologies into their products.[ES] En la actualidad varios estándares de comunicación están surgiendo buscando velocidades de transmisión más altas y mayor fiabilidad. Esta expansión está impulsada por el aumento en el consumo de servicios multimedia debido a la aparición de nuevos dispositivos como los smartphones y las tabletas. Una de las técnicas empleadas más importantes es el uso de múltiples antenas de transmisión y recepción, conocida como sistemas MIMO, que permite aumentar la velocidad y la calidad de la transmisión. Las tecnologías MIMO se han convertido en una parte esencial en diferentes estándares tales como WLAN, WiMAX y LTE. Estas tecnologías se incorporarán también en futuros estándares, por lo tanto, se espera en los próximos años una gran cantidad de investigación en este campo. Está claro que el estudio de los sistemas MIMO es crítico en la investigación actual, sin embargo los problemas que surgen de esta tecnología son muy complejos. La sistemas de computación de alto rendimiento, y en concreto, las arquitecturas hardware actuales como multi-core y many-core (p. ej. GPUs) están jugando un papel clave en el desarrollo de algoritmos eficientes y de baja complejidad en las transmisiones MIMO. Prueba de ello es que el número de contribuciones científicas y proyectos de investigación relacionados con su uso se han incrementado en el últimos años. Algunas librerías de alto rendimiento se están utilizando como herramientas por investigadores en el desarrollo de futuros estándares. Dos de las librerías más destacadas son: IT++ que se basa en el uso de distintas librerías optimizadas para procesadores multi-core y el paquete Communications System Toolbox diseñada para su uso con MATLAB, que utiliza computación con GPU. Sin embargo, no hay una biblioteca capaz de ejecutarse en una plataforma heterogénea. En vista de los altos requisitos computacionales en la investigación MIMO y la escasez de herramientas capaces de satisfacerlos, hemos implementado una librería que facilita el desarrollo de aplicaciones paralelas adaptables de acuerdo con las diferentes arquitecturas de la plataforma de ejecución. La librería, llamada MIMOPack, implementa de manera eficiente un conjunto de funciones para llevar a cabo algunas de las etapas críticas en la simulación de un sistema de comunicación MIMO. La principal aportación de la tesis es la implementación de detectores eficientes de salida Hard y Soft, ya que la etapa de detección es considerada la parte más compleja en el proceso de comunicación. Estos detectores son altamente configurables y muchos de ellos incluyen técnicas de preprocesamiento que reducen el coste computacional y aumentan el rendimiento. La librería propuesta tiene tres características importantes: la portabilidad, la eficiencia y facilidad de uso. La versión actual permite computación en GPU y multi-core, incluso simultáneamente, ya que está diseñada para ser utilizada sobre plataformas heterogéneas que explotan toda la capacidad computacional. Para facilitar el uso de la biblioteca, las interfaces de las funciones son comunes para todas las arquitecturas. Algunas de las funciones se pueden llamar desde MATLAB aumentando la portabilidad de códigos desarrollados entre los diferentes entornos. De acuerdo con el diseño de la biblioteca y la evaluación del rendimiento, consideramos que MIMOPack puede facilitar la implementación de códigos sin tener que saber programar con diferentes lenguajes y arquitecturas. MIMOPack permitirá incluir algoritmos más complejos en las simulaciones y obtener los resultados más rápidamente. Esto es particularmente importante en la industria, ya que los fabricantes trabajan para proponer sus propias tecnologías lo antes posible con el objetivo de que sean aprobadas como un estándar. De este modo, los fabricantes pueden hacer valer sus derechos de propiedad intelectual frente a sus competidores, quienes luego deben obtener las correspon[CA] En l'actualitat diversos estàndards de comunicació estan sorgint i evolucionant cercant velocitats de transmissió més altes i major fiabilitat. Aquesta expansió, està impulsada pel continu augment en el consum de serveis multimèdia a causa de l'aparició de nous dispositius portàtils com els smartphones i les tablets. Una de les tècniques més importants és l'ús de múltiples antenes de transmissió i recepció (MIMO) que permet augmentar la velocitat de transmissió i la qualitat de transmissió. Les tecnologies MIMO s'han convertit en una part essencial en diferents estàndards inalàmbrics, tals com WLAN, WiMAX i LTE. Aquestes tecnologies s'incorporaran també en futurs estàndards, per tant, s'espera en els pròxims anys una gran quantitat d'investigació en aquest camp. L'estudi dels sistemes MIMO és crític en la recerca actual, no obstant açó, els problemes que sorgeixen d'aquesta tecnologia són molt complexos. Els sistemes de computació d'alt rendiment com els multi-core i many-core (p. ej. GPUs)), estan jugant un paper clau en el desenvolupament d'algoritmes eficients i de baixa complexitat en les transmissions MIMO. Prova d'açò és que el nombre de contribucions científiques i projectes d'investigació relacionats amb el seu ús s'han incrementat en els últims anys. Algunes llibreries d'alt rendiment estan utilitzant-se com a eines per investigadors involucrats en el desenvolupament de futurs estàndards. Dos de les llibreries més destacades són: IT++ que és una llibreria basada en lús de diferents llibreries optimitzades per a processadors multi-core i el paquet Communications System Toolbox dissenyat per al seu ús amb MATLAB, que utilitza computació amb GPU. No obstant açò, no hi ha una biblioteca capaç d'executar-se en una plataforma heterogènia. Degut als alts requisits computacionals en la investigació MIMO i l'escacès d'eines capaces de satisfer-los, hem implementat una llibreria que facilita el desenvolupament d'aplicacions paral·leles adaptables d'acord amb les diferentes arquitectures de la plataforma d'ejecució. La llibreria, anomenada MIMOPack, implementa de manera eficient, un conjunt de funcions per dur a terme algunes de les etapes crítiques en la simulació d'un sistema de comunicació MIMO. La principal aportació de la tesi és la implementació de detectors eficients d'exida Hard i Soft, ja que l'etapa de detecció és considerada la part més complexa en el procés de comunicació. Estos detectors són altament configurables i molts d'ells inclouen tècniques de preprocessament que redueixen el cost computacional i augmenten el rendiment. La llibreria proposta té tres característiques importants: la portabilitat, l'eficiència i la facilitat d'ús. La versió actual permet computació en GPU i multi-core, fins i tot simultàniament, ja que està dissenyada per a ser utilitzada sobre plataformes heterogènies que exploten tota la capacitat computacional. Amb el fi de simplificar l'ús de la biblioteca, les interfaces de les funcions són comunes per a totes les arquitectures. Algunes de les funcions poden ser utilitzades des de MATLAB augmentant la portabilitat de còdics desenvolupats entre els diferentes entorns. D'acord amb el disseny de la biblioteca i l'evaluació del rendiment, considerem que MIMOPack pot facilitar la implementació de còdics a investigadors sense haver de saber programar amb diferents llenguatges i arquitectures. MIMOPack permetrà incloure algoritmes més complexos en les seues simulacions i obtindre els seus resultats més ràpid. Açò és particularment important en la industria, ja que els fabricants treballen per a proposar les seues pròpies tecnologies el més prompte possible amb l'objectiu que siguen aprovades com un estàndard. D'aquesta menera, els fabricants podran fer valdre els seus drets de propietat intel·lectual enfront dels seus competidors, els qui després han d'obtenir les corresponents llicències si voleRamiro Sánchez, C. (2015). MIMOPack: A High Performance Computing Library for MIMO Communication Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/53930TESISPremios Extraordinarios de tesis doctorale

Enabling VLSI processing blocks for MIMO-OFDM Communications

Multi-input multi-output (MIMO) systems combined with orthogonal frequency-division multiplexing (OFDM) gained a wide popularity in wireless applications due to the potential of providing increased channel capacity and robustness against multipath fading channels. However these advantages come at the cost of a very high processing complexity and the efficient implementation of MIMO-OFDM receivers is today a major research topic. In this paper, efficient architectures are proposed for the hardware implementation of the main building blocks of a MIMO-OFDM receiver. A sphere decoder architecture flexible to different modulation without any loss in BER performance is presented while the proposed matrix factorization implementation allows to achieve the highest throughput specified in the IEEE 802.11n standard. Finally a novel sphere decoder approach is presented, which allows for the realization of new golden space time trellis coded modulation (GST-TCM) scheme. Implementation cost and offered throughput are provided for the proposed architectures synthesized on a 0.13  CMOS standard cell technology or on advanced FPGA devices