Design and development of an embedded flash memory integrated simulator for the automotive microcontroller firmware validation

Applicazioni automotive possono compromettere la sicurezza delle persone pertanto i componenti devono essere affidabili in qualsiasi condizione operativa. L'affidabilità può essere raggiunta testando i dispositivi dopo la produzione, progettare il test è un compito delicato in quanto non sono presenti fisicamente i primi prototipi del dispositivo. Realizziamo un simulatore di memorie flash integrate di un microcontrollore automotive per facilitare la progettazione dei tes

Semiconductor Memory Applications in Radiation Environment, Hardware Security and Machine Learning System

abstract: Semiconductor memory is a key component of the computing systems. Beyond the conventional memory and data storage applications, in this dissertation, both mainstream and eNVM memory technologies are explored for radiation environment, hardware security system and machine learning applications. In the radiation environment, e.g. aerospace, the memory devices face different energetic particles. The strike of these energetic particles can generate electron-hole pairs (directly or indirectly) as they pass through the semiconductor device, resulting in photo-induced current, and may change the memory state. First, the trend of radiation effects of the mainstream memory technologies with technology node scaling is reviewed. Then, single event effects of the oxide based resistive switching random memory (RRAM), one of eNVM technologies, is investigated from the circuit-level to the system level. Physical Unclonable Function (PUF) has been widely investigated as a promising hardware security primitive, which employs the inherent randomness in a physical system (e.g. the intrinsic semiconductor manufacturing variability). In the dissertation, two RRAM-based PUF implementations are proposed for cryptographic key generation (weak PUF) and device authentication (strong PUF), respectively. The performance of the RRAM PUFs are evaluated with experiment and simulation. The impact of non-ideal circuit effects on the performance of the PUFs is also investigated and optimization strategies are proposed to solve the non-ideal effects. Besides, the security resistance against modeling and machine learning attacks is analyzed as well. Deep neural networks (DNNs) have shown remarkable improvements in various intelligent applications such as image classification, speech classification and object localization and detection. Increasing efforts have been devoted to develop hardware accelerators. In this dissertation, two types of compute-in-memory (CIM) based hardware accelerator designs with SRAM and eNVM technologies are proposed for two binary neural networks, i.e. hybrid BNN (HBNN) and XNOR-BNN, respectively, which are explored for the hardware resource-limited platforms, e.g. edge devices.. These designs feature with high the throughput, scalability, low latency and high energy efficiency. Finally, we have successfully taped-out and validated the proposed designs with SRAM technology in TSMC 65 nm. Overall, this dissertation paves the paths for memory technologies’ new applications towards the secure and energy-efficient artificial intelligence system.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

SRAM Compiler For Automated Memory Layout Supporting Multiple Transistor Process Technologies

This research details the design of an SRAM compiler for quickly creating SRAM blocks for Cal Poly integrated circuit (IC) designs. The compiler generates memory for two process technologies (IBM 180nm cmrf7sf and ON Semiconductor 600nm SCMOS) and requires a minimum number of specifications from the user for ease of use, while still offering the option to customize the performance for speed or area of the generated SRAM cell. By automatically creating SRAM arrays, the compiler saves the user time from having to layout and test memory and allows for quick updates and changes to a design. Memory compilers with various features already exist, but they have several disadvantages. Most memory compilers are expensive, usually only generate memory for one process technology, and don’t allow for user-defined custom SRAM cell optimizations. This free design makes it available for students and institutions that would not be able to afford an industry-made compiler. A compiler that offers multiple process technologies allows for more freedom to design in other processes if needed or desired. An attempt was made for this design to be modular for different process technologies so new processes could be added with ease; however, different process technologies have different DRC rules, making that option very difficult to attain. A customizable SRAM cell based on transistor sizing ratios allows for optimized designs in speed, area, or power, and for academic research. Even for an experienced designer, the layout of a single SRAM cell (1 bit) can take an hour. This command-line-based tool can draw a 1Kb SRAM block in seconds and a 1Mb SRAM block in about 15 minutes. In addition, this compiler also adds a manually laid out precharge circuit to each of the SRAM columns for an enhanced read operation by ensuring the bit lines have valid logic output values. Finally, an analysis on SRAM cell stability is done for creating a robust cell as the default design for the compiler. The default cell design is verified for stability during read and write operations, and has an area of 14.067 µm2 for the cmrf7sf process and 246.42 µm2 for the SCMOS process. All factors considered, this SRAM compiler design overcomes several of the drawbacks of other existing memory compilers

Design of High Performance SRAM Based Memory Chip

The semiconductor memory SRAM uses bi-stable latch circuit to store the logic data 1 or 0. It differs from Dynamic RAM (DRAM) which needs periodic refreshment operation for the storage of logic data. Depending upon the frequency of operation SRAM power consumption varies i.e. it consumes very high power at higher frequencies like DRAM. The Cache memory present in the microprocessor needs high speed memory hence SRAM can be used for that purpose in microprocessors. The DRAM is normally used in the Main memory of processors, where importance is given to the density than its speed. The SRAM is also used in industrial subsystems, scientific and automotive electronics. In this thesis 16-Kb Memory is designed by using memory banking method in UMC 90nm technology ,which operates at a frequency of 1GHz.The post layout simulation for the complete design is performed and also obtained power analysis for the overall design. All peripherals like pre-charge, Row Decoder, Word line driver, Sense amplifier, Column Decoder/Mux and write driver are designed and layouts of all the above peripherals also drawn in an optimised manner such that their layout occupies minimum area. The 6T SRAM cell is designed with operating frequency of 8 GHz and stability analysis are also performed for single SRAM cell. The layout of Single SRAM cell is drawn in a symmetric manner, such that two adjacent cells can share same contact, which results reduction in the area of cell layout. The Static Noise Margin, Read noise margin and Write Noise Margin of single cell are found to be 240mV, 115mV and 425mV respectively for a supply voltage of 1V.The effect of pull-up ratio and cell ratio on the stability of SRAM cell is observed

Emerging embedded nonvolatile memory solution for ultra low power microcontroller systems

13301甲第4810号博士（工学）金沢大学博士論文本文Full 以下に掲載および掲載予定：1.IEEE Journal of Solid-State Circuits 27(4) pp.569-573 1992. IEEE. 共著者：M. Hayashikoshi, H. Hidaka, K. Arimoto, K. Fujishima 2.IEEE Transactions on Multi-Scale Computing Systems IEEE. 共著者：M. Hayashikoshi, H. Noda, H. Kawai, Y. Murai, S. Otani, K. Nii, Y. Matsuda, H. Kond

Physics of thin-film ferroelectric oxides

This review covers the important advances in recent years in the physics of thin film ferroelectric oxides, the strongest emphasis being on those aspects particular to ferroelectrics in thin film form. We introduce the current state of development in the application of ferroelectric thin films for electronic devices and discuss the physics relevant for the performance and failure of these devices. Following this we cover the enormous progress that has been made in the first principles computational approach to understanding ferroelectrics. We then discuss in detail the important role that strain plays in determining the properties of epitaxial thin ferroelectric films. Finally, we look at the emerging possibilities for nanoscale ferroelectrics, with particular emphasis on ferroelectrics in non conventional nanoscale geometries.Comment: This is an invited review for Reviews of Modern Physics. We welcome feedback and will endeavour to incorporate comments received promptly into the final versio

Second year technical report on-board processing for future satellite communications systems

Advanced baseband and microwave switching techniques for large domestic communications satellites operating in the 30/20 GHz frequency bands are discussed. The nominal baseband processor throughput is one million packets per second (1.6 Gb/s) from one thousand T1 carrier rate customer premises terminals. A frequency reuse factor of sixteen is assumed by using 16 spot antenna beams with the same 100 MHz bandwidth per beam and a modulation with a one b/s per Hz bandwidth efficiency. Eight of the beams are fixed on major metropolitan areas and eight are scanning beams which periodically cover the remainder of the U.S. under dynamic control. User signals are regenerated (demodulated/remodulated) and message packages are reformatted on board. Frequency division multiple access and time division multiplex are employed on the uplinks and downlinks, respectively, for terminals within the coverage area and dwell interval of a scanning beam. Link establishment and packet routing protocols are defined. Also described is a detailed design of a separate 100 x 100 microwave switch capable of handling nonregenerated signals occupying the remaining 2.4 GHz bandwidth with 60 dB of isolation, at an estimated weight and power consumption of approximately 400 kg and 100 W, respectively