An Autonomous Surface Vehicle for Long Term Operations

Environmental monitoring of marine environments presents several challenges: the harshness of the environment, the often remote location, and most importantly, the vast area it covers. Manual operations are time consuming, often dangerous, and labor intensive. Operations from oceanographic vessels are costly and limited to open seas and generally deeper bodies of water. In addition, with lake, river, and ocean shoreline being a finite resource, waterfront property presents an ever increasing valued commodity, requiring exploration and continued monitoring of remote waterways. In order to efficiently explore and monitor currently known marine environments as well as reach and explore remote areas of interest, we present a design of an autonomous surface vehicle (ASV) with the power to cover large areas, the payload capacity to carry sufficient power and sensor equipment, and enough fuel to remain on task for extended periods. An analysis of the design and a discussion on lessons learned during deployments is presented in this paper.Comment: In proceedings of MTS/IEEE OCEANS, 2018, Charlesto

Space Station Human Factors Research Review. Volume 1: EVA Research and Development

An overview is presented of extravehicular activity (EVA) research and development activities at Ames. The majority of the program was devoted to presentations by the three contractors working in parallel on the EVA System Phase A Study, focusing on Implications for Man-Systems Design. Overhead visuals are included for a mission results summary, space station EVA requirements and interface accommodations summary, human productivity study cross-task coordination, and advanced EVAS Phase A study implications for man-systems design. Articles are also included on subsea approach to work systems development and advanced EVA system design requirements

The Hierarchic treatment of marine ecological information from spatial networks of benthic platforms

Measuring biodiversity simultaneously in different locations, at different temporal scales, and over wide spatial scales is of strategic importance for the improvement of our understanding of the functioning of marine ecosystems and for the conservation of their biodiversity. Monitoring networks of cabled observatories, along with other docked autonomous systems (e.g., Remotely Operated Vehicles [ROVs], Autonomous Underwater Vehicles [AUVs], and crawlers), are being conceived and established at a spatial scale capable of tracking energy fluxes across benthic and pelagic compartments, as well as across geographic ecotones. At the same time, optoacoustic imaging is sustaining an unprecedented expansion in marine ecological monitoring, enabling the acquisition of new biological and environmental data at an appropriate spatiotemporal scale. At this stage, one of the main problems for an effective application of these technologies is the processing, storage, and treatment of the acquired complex ecological information. Here, we provide a conceptual overview on the technological developments in the multiparametric generation, storage, and automated hierarchic treatment of biological and environmental information required to capture the spatiotemporal complexity of a marine ecosystem. In doing so, we present a pipeline of ecological data acquisition and processing in different steps and prone to automation. We also give an example of population biomass, community richness and biodiversity data computation (as indicators for ecosystem functionality) with an Internet Operated Vehicle (a mobile crawler). Finally, we discuss the software requirements for that automated data processing at the level of cyber-infrastructures with sensor calibration and control, data banking, and ingestion into large data portals.Peer ReviewedPostprint (published version

Distributed Control Architecture

This document describes the development and testing of a novel Distributed Control Architecture (DCA). The DCA developed during the study is an attempt to turn the components used to construct unmanned vehicles into a network of intelligent devices, connected using standard networking protocols. The architecture exists at both a hardware and software level and provides a communication channel between control modules, actuators and sensors. A single unified mechanism for connecting sensors and actuators to the control software will reduce the technical knowledge required by platform integrators and allow control systems to be rapidly constructed in a Plug and Play manner. DCA uses standard networking hardware to connect components, removing the need for custom communication channels between individual sensors and actuators. The use of a common architecture for the communication between components should make it easier for software to dynamically determine the vehicle s current capabilities and increase the range of processing platforms that can be utilised. Implementations of the architecture currently exist for Microsoft Windows, Windows Mobile 5, Linux and Microchip dsPIC30 microcontrollers. Conceptually, DCA exposes the functionality of each networked device as objects with interfaces and associated methods. Allowing each object to expose multiple interfaces allows for future upgrades without breaking existing code. In addition, the use of common interfaces should help facilitate component reuse, unit testing and make it easier to write generic reusable software

Cost-Effective and Energy-Efficient Techniques for Underwater Acoustic Communication Modems

Finally, the modem developed has been tested experimentally in laboratory (aquatic environment) showing that can communicates at different data rates (100..1200 bps) compared to state-of-the-art research modems. The software used include LabVIEW, MATLAB, Simulink, and Multisim (to test the electronic circuit built) has been employed.Underwater wireless sensor networks (UWSNs) are widely used in many applications related to ecosystem monitoring, and many more fields. Due to the absorption of electromagnetic waves in water and line-of-sight communication of optical waves, acoustic waves are the most suitable medium of communication in underwater environments. Underwater acoustic modem (UAM) is responsible for the transmission and reception of acoustic signals in an aquatic channel. Commercial modems may communicate at longer distances with reliability, but they are expensive and less power efficient. Research modems are designed by using a digital-signal-processor (DSP is expensive) and field-programmable-gate-array (FPGA is high power consuming device). In addition to, the use of a microcontroller is also a common practice (which is less expensive) but provides limited computational power. Hence, there is a need for a cost-effective and energy-efficient UAM to be used in budget limited applications. In this thesis different objectives are proposed. First, to identify the limitations of state-of-the-art commercial and research UAMs through a comprehensive survey. The second contribution has been the design of a low-cost acoustic modem for short-range underwater communications by using a single board computer (Raspberry-Pi), and a microcontroller (Atmega328P). The modulator, demodulator and amplifiers are designed with discrete components to reduce the overall cost. The third contribution is to design a web based underwater acoustic communication testbed along with a simulation platform (with underwater channel and sound propagation models), for testing modems. The fourth contribution is to integrate in a single module two important modules present in UAMs: the PSK modulator and the power amplifier

DexROV: Enabling effective dexterous ROV operations in presence of communication latency

Subsea interventions in the oil & gas industry as well as in other domains such as archaeology or geological surveys are demanding and costly activities for which robotic solutions are often deployed in addition or in substitution to human divers - contributing to risks and costs cutting. The operation of ROVs (Remotely Operated Vehicles) nevertheless requires significant off-shore dedicated manpower to handle and operate the robotic platform and the supporting vessel. In order to reduce the footprint of operations, DexROV proposes to implement and evaluate novel operation paradigms with safer, more cost effective and time efficient ROV operations. As a keystone of the proposed approach, manned support will in a large extent be delocalized within an onshore ROV control center, possibly at a large distance from the actual operations, relying on satellite communications. The proposed scheme also makes provision for advanced dexterous manipulation and semi-autonomous capabilities, leveraging human expertise when deemed useful. The outcomes of the project will be integrated and evaluated in a series of tests and evaluation campaigns, culminating with a realistic deep sea (1,300 meters) trial in the Mediterranean sea

Design of a Mobile Underwater Charging System

Autonomous Underwater Vehicles (AUVs) are extremely capable vehicles for numerous ocean related missions. AUVs are energy limited, resulting in short mission endurance on the scale of hours to days. Underwater Gliders (UGs) are able to operate on the order of months to years by using nontraditional propulsion methods. UGs, however, are unable to perform missions requiring high speed or direct forward motion due to the nature of their buoyancy driven motion. This work reviews the current state of the art in recharging AUVs and offers an underwater recharging network concept at a significantly reduced cost to traditional methods. The solution includes the design of a UG capable of serving as charge carrying agent that couples with and charges AUVs autonomously. The vehicle design is built on the work done previously at the Nonlinear and Autonomous Systems Lab on the development of ROUGHIE (Research Oriented Underwater Glider for Hands-on Investigative Engineering). The ROUGHIE2 design is a rethinking of the original ROUGHIE capabilities to serve as a mobile charger by increasing depth rating, endurance, and payload capacity. The recharging concept presented will be easy to adapt to many different AUVs and UGs making this technology universal to small AUVs

Capacitive power transfer for maritime electrical charging applications

Wireless power transfer can provide the convenience of automatic charging while the ships or maritime vehicles are docking, mooring, or in a sailing maneuver. It can address the challenges facing conventional wired charging technologies, including long charging and queuing time, wear and tear of the physical contacts, handling cables and wires, and electric shock hazards. Capacitive power transfer (CPT) is one of the wireless charging technologies that has received attention in on-road electric vehicle charging applications. By the main of electric fields, CPT offers an inexpensive and light charging solution with good misalignment performance. Thus, this study investigates the CPT system in which air and water are the separation medium for the electrical wireless charging of small ships and unmanned maritime vehicles. Unlike on-road charging applications, air or water can be utilized as charging mediums to charge small ships and unmanned maritime vehicles. Because of the low permittivity of the air, the air-gapped capacitive coupling in the Pico Farad range requires a mega-hertz operating frequency to transfer power over a few hundred millimeters. This study examines an air-gapped CPT system to transfer about 135 W at a separation distance of 50 mm, a total efficiency of approximately 83.9%, and a 1 MHz operating efficiency. At 13.56 MHz, the study tested a shielded air-gapped CPT system that transfers about 100 W at a separation distance of 30 mm and a total efficiency of about 87%. The study also examines the underwater CPT system by submerging the couplers in water to increase the capacitive coupling. The system can transfer about 129 W at a separation distance of 300 mm, a total efficiency of aboutapproximately%, and a 1.1 MHz operating efficiency. These CPT systems can upscale to provide a few kW for small ships and unmanned maritime vehicles. But they are still facing several challenges that need further investigations

The transfer of oil and gas technology skills to the conceptual design and development of a novel low cost modular Tidal Energy Conversion deployment system.

This thesis outlines the use of a new design of Tidal Energy Conversion device which has application in near shore shallow water. The design is applicable for use by coastal communities, either to generate revenue through power sales or just a stand alone system to generate off grid electricity. Previous work conducted on large scale tidal installations have shown that they suffer from excessive costs and time lines, due to their up front design philosophy. This thesis discusses the reasons behind such cost/time overruns and concludes that several technologies and techniques can be incorporated from the subsea oil and gas industry. The early ethos in the offshore oil industry in the 1970s and 1980s was to build large offshore structures such as steel and concrete platforms. This has now been replaced by a field development philosophy that looks at simple lower cost subsea well infrastructure as the most cost effective route to exploit a reservoir. The emerging tidal industry has not learned this lesson, yet. A set of new Tidal Energy exploitation designs are proposed and Patented. The chief advantages of this new design are their modular nature, fabrication simplicity, lower build and installation cost. Prototype work is described and further work also highlighted