407 research outputs found
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each othersâ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applicationsâ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Cooperative control of relay based cellular networks
PhDThe increasing popularity of wireless communications and the higher data
requirements of new types of service lead to higher demands on wireless networks.
Relay based cellular networks have been seen as an effective way to meet usersâ
increased data rate requirements while still retaining the benefits of a cellular
structure. However, maximizing the probability of providing service and spectrum
efficiency are still major challenges for network operators and engineers because of
the heterogeneous traffic demands, hard-to-predict user movements and complex
traffic models.
In a mobile network, load balancing is recognised as an efficient way to increase
the utilization of limited frequency spectrum at reasonable costs. Cooperative
control based on geographic load balancing is employed to provide flexibility for
relay based cellular networks and to respond to changes in the environment.
According to the potential capability of existing antenna systems, adaptive radio
frequency domain control in the physical layer is explored to provide coverage at
the right place at the right time.
This thesis proposes several effective and efficient approaches to improve
spectrum efficiency using network wide optimization to coordinate the coverage
offered by different network components according to the antenna models and
relay station capability. The approaches include tilting of antenna sectors,
changing the power of omni-directional antennas, and changing the assignment of
relay stations to different base stations. Experiments show that the proposed
approaches offer significant improvements and robustness in heterogeneous traffic
scenarios and when the propagation environment changes. The issue of predicting
the consequence of cooperative decisions regarding antenna configurations when
applied in a realistic environment is described, and a coverage prediction model is
proposed. The consequences of applying changes to the antenna configuration on
handovers are analysed in detail. The performance evaluations are based on a
system level simulator in the context of Mobile WiMAX technology, but the
concepts apply more generally
Protocol design and optimization for QoS provisioning in wireless mesh networks
Wireless Mesh Network (WMN) has been recognized as a promising step towards the goal of ubiquitous broadband wireless Internet access. By exploiting the state-of-the-art radio and multi-hop networking technologies, mesh nodes in WMN collaboratively form a stationary wireless communication backbone. Data between clients and the Internet is routed through a series of mesh nodes via one or multiple paths. Such a mesh structure enables WMN to provide clients high-speed Internet access services with a less expensive and easier-to-deployment wireless infrastructure comparing to the wired counterparts.
Due to the unique characteristics of WMN, existing protocols and schemes designed for other wellstudied wireless networks, such as Wi-Fi and Mobile Ad-hoc Network (MANET), are not suitable for WMN and hence cannot be applied to WMN directly. Therefore, novel protocols specifically designed and optimized forWMNare highly desired to fully exploit the mesh architecture. The goal is to provide high-level Quality-of-Service (QoS) to WMN clients to enable a rich portfolio of wireless and mobile applications and scenarios.
This dissertation investigates the following important issues related to QoS provisioning in WMN: high throughput routing between WMN clients and the Internet, fairness provisioning among WMN clients and network-level capacity optimization. We propose innovative solutions to address these issues and improve the performance, scalability and reliability of WMN. In addition, we develop CyMesh, a multi-radio multi-channel (MRMC) wireless mesh network testbed, to evaluate the capacity and performance of WMN in real world environments. Extensive simulation (using the QualNet simulator) and experimental (over the CyMesh testbed) results demonstrate the effectiveness of the designed protocols. In particular, we learn that the system capacity of WMN can be improved significantly by exploiting the MRMC network architecture and the antenna directionality of radios equipped on mesh nodes, and our proposed fulfillment based fairness is a reasonable notion for fair service provisioning among WMN clients. Moreover, we report the encountered problems, key observations and learned lessons during the design and deployment of CyMesh, which may serve as a valuable resource for future MRMC WMN implementations
Multipath routing and QoS provisioning in mobile ad hoc networks
PhDA Mobile Ad Hoc Networks (MANET) is a collection of mobile nodes that can
communicate with each other using multihop wireless links without utilizing any
fixed based-station infrastructure and centralized management. Each mobile node
in the network acts as both a host generating flows or being destination of flows
and a router forwarding flows directed to other nodes.
Future applications of MANETs are expected to be based on all-IP
architecture and be capable of carrying multitude real-time multimedia
applications such as voice and video as well as data. It is very necessary for
MANETs to have an efficient routing and quality of service (QoS) mechanism to
support diverse applications.
This thesis proposes an on-demand Node-Disjoint Multipath Routing protocol
(NDMR) with low broadcast redundancy. Multipath routing allows the
establishment of multiple paths between a single source and single destination
node. It is also beneficial to avoid traffic congestion and frequent link breaks in
communication because of the mobility of nodes. The important components of
the protocol, such as path accumulation, decreasing routing overhead and
selecting node-disjoint paths, are explained. Because the new protocol
significantly reduces the total number of Route Request packets, this results in an
increased delivery ratio, smaller end-to-end delays for data packets, lower control
overhead and fewer collisions of packets.
Although NDMR provides node-disjoint multipath routing with low route
overhead in MANETs, it is only a best-effort routing approach, which is not
enough to support QoS. DiffServ is a standard approach for a more scalable way
to achieve QoS in any IP network and could potentially be used to provide QoS
in MANETs because it minimises the need for signalling. However, one of the
biggest drawbacks of DiffServ is that the QoS provisioning is separate from the
routing process. This thesis presents a Multipath QoS Routing protocol for
iv
supporting DiffServ (MQRD), which combines the advantages of NDMR and
DiffServ. The protocol can classify network traffic into different priority levels
and apply priority scheduling and queuing management mechanisms to obtain
QoS guarantees
Cross-layer design and optimization of medium access control protocols for wlans
This thesis provides a contribution to the field of Medium Access Control (MAC) layer protocol design for wireless networks by proposing and evaluating mechanisms that enhance different aspects of the network performance. These enhancements are achieved through the exchange of information between different layers of the traditional protocol stack, a concept known as Cross-Layer (CL) design. The main thesis contributions are divided into two parts.
The first part of the thesis introduces a novel MAC layer protocol named Distributed Queuing Collision Avoidance (DQCA). DQCA behaves as a reservation scheme that ensures collision-free data transmissions at the majority of the time and switches automatically to an Aloha-like random access mechanism when the traffic load is low. DQCA can be enriched by more advanced scheduling algorithms based on a CL dialogue between the MAC and other protocol layers, to provide higher throughput and Quality of Service (QoS) guarantees.
The second part of the thesis explores a different challenge in MAC layer design, related to the ability of multiple antenna systems to offer point-to-multipoint communications. Some modifications to the recently approved IEEE 802.11n standard are proposed in order to handle simultaneous multiuser downlink transmissions. A number of multiuser MAC schemes that handle channel access and scheduling issues and provide mechanisms for feedback acquisition have been presented and evaluated. The obtained performance enhancements have been demonstrated with the help of both theoretical analysis and simulation obtained results
Rough set based QoS enabled multipath source routing in MANET
The single constrained Quality of Service (QoS) routing in Mobile Ad-hoc NETwork (MANET) is disastrous in consideration of MANET characteristics, inference, collision and link failure as it maintains a single path. The QoS enabled routing yields better packet delivery and maintains consistency among nodes in the network by incorporating multi-constrained and multipath routing. The Dynamic Source Routing (DSR) is best suited source routing algorithm to maintain multipath information at the source node, but performance degrades with larger number of mobile nodes. Multi-layer mechanism should be incorporated to maintain QoS metric information spreads across multiple layers of TCP/IP protocol stack. The proposed multipath QoS enabled source routing provides balanced routing by making use of all these features. The imprecise decision making strategy called Rough Set Theory (RST) is used at destination node for decision making. The Route REQuest (RREQ) messages coming from different routes are filtered by considering the QoS metrics of each and every route by making use of RST. The Route REPly (RREP) messages are generated and delivered to the source node for filtered RREQ messages. The proposed routing algorithm will reduce load on the network by reducing number of control messages exchanged for route establishment. This will evenly distribute load among all the nodes and it also avoid the scenarios like few nodes starved for resources. Finally, multipath routing always provides alternate routing option in case of route failure
Mobile Ad-Hoc Networks
Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks
Enabling Millimeter Wave Communication for 5G Cellular Networks: MAC-layer Perspective
Data traffic among mobile devices increases dramatically with emerging high-speed multimedia applications such as uncompressed video streaming. Many new applications beyond personal communications involve tens or even hundreds of billions wireless devices, such as wireless watch, e-health sensors, and wireless glass. The number of wireless devices and the data rates will continue to grow exponentially. Quantitative evidences forecast that total data rate by 2020 will be 1000 times of current 4G data rate. Next generation wireless networks need fundamental changes to satisfy the overwhelming capacity demands.
Millimeter wave (mmWave) communication with huge available bandwidth is a very promising solution for next generation wireless networks to overcome the global bandwidth shortage at saturated microwave spectrum. The large available bandwidth can be directly translated into high capacity. mmWave communication has several propagation characteristics including strong pathloss, atmospheric and rain absorption, low diffraction around obstacles and penetration through objects. These propagation characteristics create challenges for next generation wireless networks to support various kinds of emerging applications with different QoS requirements. Our research focuses on how to effectively and efficiently exploit the large available mmWave bandwidth to achieve high capacity demand while overcoming these challenges on QoS provisioning for various kinds of applications.
This thesis focuses on MAC protocol design and analysis for mmWave communication to provide required capacity and QoS to support various kinds of applications in next generation wireless networks. Specifically, from the transmitter/receiver perspective, multi-user beamforming based on codebook is conducted to determine best transmission/reception beams to increase network capacity considering the mutual interferences among concurrent links. From the channel perspective, both interfering and non-interfering concurrent links are scheduled to operate simultaneously to exploit spatial reuse and improve network capacity. Link outage problem resulting from the limited diffraction capability and low penetration capability of mmWave band is addressed for quality provisioning by enabling multi-hop transmission to replace the link in outage (for low-mobility scenarios) and buffer design with dynamic bandwidth allocation among all the users in the whole coverage area (for high-mobility scenarios). From the system perspective, system structure, network architecture, and candidate MAC are investigated and novel backoff mechanism for CSMA/CA is proposed to give more transmission opportunity to faraway nodes than nearby nodes in order to achieve better fairness and higher network capacity. In this thesis, we formulate each problem mentioned above as an optimization problem with the proposed algorithms to solve it. Extensive analytical and simulation results are provided to demonstrate the performance of the proposed algorithms in several aspects, such as network capacity, energy efficiency, link connectivity and so on
- âŠ