Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

Low-Memory Techniques for Routing and Fault-Tolerance on the Fat-Tree Topology

Actualmente, los clústeres de PCs están considerados como una alternativa eficiente a la hora de construir supercomputadores en los que miles de nodos de computación se conectan mediante una red de interconexión. La red de interconexión tiene que ser diseñada cuidadosamente, puesto que tiene una gran influencia sobre las prestaciones globales del sistema. Dos de los principales parámetros de diseño de las redes de interconexión son la topología y el encaminamiento. La topología define la interconexión de los elementos de la red entre sí, y entre éstos y los nodos de computación. Por su parte, el encaminamiento define los caminos que siguen los paquetes a través de la red. Las prestaciones han sido tradicionalmente la principal métrica a la hora de evaluar las redes de interconexión. Sin embargo, hoy en día hay que considerar dos métricas adicionales: el coste y la tolerancia a fallos. Las redes de interconexión además de escalar en prestaciones también deben hacerlo en coste. Es decir, no sólo tienen que mantener su productividad conforme aumenta el tamaño de la red, sino que tienen que hacerlo sin incrementar sobremanera su coste. Por otra parte, conforme se incrementa el número de nodos en las máquinas de tipo clúster, la red de interconexión debe crecer en concordancia. Este incremento en el número de elementos de la red de interconexión aumenta la probabilidad de aparición de fallos, y por lo tanto, la tolerancia a fallos es prácticamente obligatoria para las redes de interconexión actuales. Esta tesis se centra en la topología fat-tree, ya que es una de las topologías más comúnmente usadas en los clústeres. El objetivo de esta tesis es aprovechar sus características particulares para proporcionar tolerancia a fallos y un algoritmo de encaminamiento capaz de equilibrar la carga de la red proporcionando una buena solución de compromiso entre las prestaciones y el coste.Gómez Requena, C. (2010). Low-Memory Techniques for Routing and Fault-Tolerance on the Fat-Tree Topology [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8856Palanci

Floorplan-Aware High Performance NoC Design

Las actuales arquitecturas de m�ltiples n�cleos como los chip multiprocesadores (CMP) y soluciones multiprocesador para sistemas dentro del chip (MPSoCs) han adoptado a las redes dentro del chip (NoC) como elemento -ptimo para la inter-conexi-n de los diversos elementos de dichos sistemas. En este sentido, fabricantes de CMPs y MPSoCs han adoptado NoCs sencillas, generalmente con una topolog'a en malla o anillo, ya que son suficientes para satisfacer las necesidades de los sistemas actuales. Sin embargo a medida que los requerimientos del sistema -- baja latencia y alto rendimiento -- se hacen m�s exigentes, estas redes tan simples dejan de ser una soluci-n real. As', la comunidad investigadora ha propuesto y analizado NoCs m�s complejas. No obstante, estas soluciones son m�s dif'ciles de implementar -- especialmente los enlaces largos -- haciendo que este tipo de topolog'as complejas sean demasiado costosas o incluso inviables. En esta tesis, presentamos una metodolog'a de dise-o que minimiza la p�rdida de prestaciones de la red debido a su implementaci-n real. Los principales problemas que se encuentran al implementar una NoC son los conmutadores y los enlaces largos. En esta tesis, el conmutador se ha hecho modular, es decir, formado como uni-n de m-dulos m�s peque-os. En nuestro caso, los m-dulos son id�nticos, donde cada m-dulo es capaz de arbitrar, conmutar, y almacenar los mensajes que le llegan. Posteriormente, flexibilizamos la colocaci-n de estos m-dulos en el chip, permitiendo que m-dulos de un mismo conmutador est�n distribuidos por el chip. Esta metodolog'a de dise-o la hemos aplicado a diferentes escenarios. Primeramente, hemos introducido nuestro conmutador modular en NoCs con topolog'as conocidas como la malla 2D. Los resultados muestran como la modularidad y la distribuci-n del conmutador reducen la latencia y el consumo de potencia de la red. En segundo lugar, hemos utilizado nuestra metodolog'a de dise-o para implementar un crossbar distribuidRoca Pérez, A. (2012). Floorplan-Aware High Performance NoC Design [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17844Palanci

Head-of-Line Blocking Reduction in Power-Efficient Networks-on-Chip

Tesis por compendioNowadays, thanks to the continuous improvements in the integration scale, more and more cores are added on the same chip, leading to higher system performance. In order to interconnect all nodes, a network-on-chip (NoC) is used, which is in charge of delivering data between cores. However, increasing the number of cores leads to a significant power consumption increase, leading the NoC to be one of the most expensive components in terms of power. Because of this, during the last years, several mechanisms have been proposed to address the NoC power consumption by means of DVFS (Dynamic Voltage and Frequency Scaling) and power-gating strategies. Nevertheless, improvements achieved by these mechanisms are achieved, to a greater or lesser extent, at the cost of system performance, potentially increasing the risk of saturating the network by forming congested points which, in turn, compromise the rest of the system functionality. One side effect is the creation of the "Head-of-Line blocking" effect where congested packets at the head of queues prevent other non-blocked packets from advancing. To address this issue, in this thesis, on one hand, we propose novel congestion control techniques in order to improve system performance by removing the "Head-of-Line" blocking effect. On the other hand, we propose combined solutions adapted to DVFS in order to achieve improvements in terms of performance and power. In addition to this, we propose a path-aware power-gating-based mechanism, which is capable of detecting the flows sharing buffer resources along data paths and perform to switch them off when not needed. With all these combined solutions we can significantly reduce the power consumption of the NoC when compared with state-of-the-art proposals.Hoy en día, gracias a las mejoras en la escala de integración cada vez se integran más y más núcleos en un mismo chip, mejorando así sus prestaciones. Para interconectar todos los nodos dentro del chip se emplea una red en chip (NoC, Network-on-Chip), la cual es la encargada de intercambiar información entre núcleos. No obstante, aumentar el número de núcleos en el chip también conlleva a su vez un importante incremento en el consumo de la NoC, haciendo que ésta se convierta en una de las partes más caras del chip en términos de consumo. Por ello, en los últimos años se han propuesto diversas técnicas de ahorro de energía orientadas a reducir el consumo de la NoC mediante el uso de DVFS (Dynamic Voltage and Frequency Scaling) o estrategias basadas en "power-gating". Sin embargo, éstas mejoras de consumo normalmente se obtienen a costa de sacrificar, en mayor o menor medida, las prestaciones del sistema, aumentado potencialmente así el riesgo de saturar la red, generando puntos de congestión que, a su vez, comprometen el rendimiento del resto del sistema. Un efecto colateral es el "Head-of-Line blocking", mediante el que paquetes congestionados en la cabeza de la cola impiden que otros paquetes no congestionados avancen. Con el fin de solucionar este problema, en ésta tesis, en primer lugar, proponemos técnicas novedosas de control de congestión para incrementar el rendimiento del sistema mediante la eliminación del "Head-of-Line blocking", mientras que, por otra parte, proponemos soluciones combinadas adaptadas a DVFS con el fin de conseguir mejoras en términos de rendimiento y energía. Además, proponemos una técnica de "power-gating" orientada a rutas de datos, la cual es capaz de detectar flujos de datos compartiendo recursos a lo largo de rutas y apagar dichos recursos de forma dinámica cuando no son necesarios. Con todas éstas soluciones combinadas podemos reducir el consumo de energía de la NoC en comparación con otras técnicas presentes en el estado del arte.Hui en dia, gr\`acies a les millores en l'escala d'integraci\'o, cada vegada s'integren m\'es i m\'es nuclis en un mateix xip, la qual cosa millora les seues prestacions. Per tal d'interconectar tots els nodes dins el xip es fa \'us d'una Xarxa en Xip (NoC; Network-on-Chip), la qual \'es l'encarregada d'intercanviar informaci\'o entre els nuclis. No obstant aix\`o, incrementar el nombre de nuclis en el xip tamb\'e comporta un important augment en el consum de la NoC, la qual cosa fa que aquesta es convertisca en una de les parts m\'es costoses del xip en termes de consum. Per aix\`o, en els \'ultims anys s'han proposat diverses t\`ecniques d'estalvi d'energia orientades a reduir el consum de la NoC mitjançant l'\'us de DVFS (Dynamic Voltage and Frequency Scaling) o estrat\`egies basades en ``power-gating''. Malgrat aix\`o, aquestes millores en les prestacions normalment s'obtenen a costa de sacrificar, en major o menor mesura, les prestacions del sistema i augmenta aix\'i el risc de saturar la xarxa al generar-se punts de congesti\'o, que al mateix temps, comprometen el rendiment de la resta del sistema. Un efecte col-lateral \'es el ``Head-of- Line blocking'', mitjançant el qual, els paquets congestionats al cap de la cua, impedixen que altres paquets no congestionats avancen. A fi de solucionar eixe problema, en aquesta tesi, en primer lloc, proposem noves t\`ecniques de control de congesti\'o amb l'objectiu d'incrementar el rendiment del sistema per mitj\`a de l'eliminaci\'o del ``Head-of- Line blocking'', i d'altra banda, proposem solucions combinades adaptades a DVFS amb la finalitat d'aconseguir millores en termes de rendiment i energia. A m\'es, proposem una t\`ecnica de ``power-gating'' orientada a rutes de dades, la qual \'es capa\c c de detectar fluxos de dades al compartir recursos al llarg de les rutes i apagar eixos recursos de forma din\`amica quan no s\'on necessaris. Amb totes aquestes solucions combinades podem reduir el consum d'energia de la NoC en comparaci\'o amb altres t\`ecniques presents en l'estat de l'art.Escamilla López, JV. (2017). Head-of-Line Blocking Reduction in Power-Efficient Networks-on-Chip [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90419TESISCompendi

Routing on the Channel Dependency Graph:: A New Approach to Deadlock-Free, Destination-Based, High-Performance Routing for Lossless Interconnection Networks

In the pursuit for ever-increasing compute power, and with Moore's law slowly coming to an end, high-performance computing started to scale-out to larger systems. Alongside the increasing system size, the interconnection network is growing to accommodate and connect tens of thousands of compute nodes. These networks have a large influence on total cost, application performance, energy consumption, and overall system efficiency of the supercomputer. Unfortunately, state-of-the-art routing algorithms, which define the packet paths through the network, do not utilize this important resource efficiently. Topology-aware routing algorithms become increasingly inapplicable, due to irregular topologies, which either are irregular by design, or most often a result of hardware failures. Exchanging faulty network components potentially requires whole system downtime further increasing the cost of the failure. This management approach becomes more and more impractical due to the scale of today's networks and the accompanying steady decrease of the mean time between failures. Alternative methods of operating and maintaining these high-performance interconnects, both in terms of hardware- and software-management, are necessary to mitigate negative effects experienced by scientific applications executed on the supercomputer. However, existing topology-agnostic routing algorithms either suffer from poor load balancing or are not bounded in the number of virtual channels needed to resolve deadlocks in the routing tables. Using the fail-in-place strategy, a well-established method for storage systems to repair only critical component failures, is a feasible solution for current and future HPC interconnects as well as other large-scale installations such as data center networks. Although, an appropriate combination of topology and routing algorithm is required to minimize the throughput degradation for the entire system. This thesis contributes a network simulation toolchain to facilitate the process of finding a suitable combination, either during system design or while it is in operation. On top of this foundation, a key contribution is a novel scheduling-aware routing, which reduces fault-induced throughput degradation while improving overall network utilization. The scheduling-aware routing performs frequent property preserving routing updates to optimize the path balancing for simultaneously running batch jobs. The increased deployment of lossless interconnection networks, in conjunction with fail-in-place modes of operation and topology-agnostic, scheduling-aware routing algorithms, necessitates new solutions to solve the routing-deadlock problem. Therefore, this thesis further advances the state-of-the-art by introducing a novel concept of routing on the channel dependency graph, which allows the design of an universally applicable destination-based routing capable of optimizing the path balancing without exceeding a given number of virtual channels, which are a common hardware limitation. This disruptive innovation enables implicit deadlock-avoidance during path calculation, instead of solving both problems separately as all previous solutions

Autonomic Overload Management For Large-Scale Virtualized Network Functions

The explosion of data traffic in telecommunication networks has been impressive in the last few years. To keep up with the high demand and staying profitable, Telcos are embracing the Network Function Virtualization (NFV) paradigm by shifting from hardware network appliances to software virtual network functions, which are expected to support extremely large scale architectures, providing both high performance and high reliability. The main objective of this dissertation is to provide frameworks and techniques to enable proper overload detection and mitigation for the emerging virtualized software-based network services. The thesis contribution is threefold. First, it proposes a novel approach to quickly detect performance anomalies in complex and large-scale VNF services. Second, it presents NFV-Throttle, an autonomic overload control framework to protect NFV services from overload within a short period of time, allowing to preserve the QoS of traffic flows admitted by network services in response to both traffic spikes (up to 10x the available capacity) and capacity reduction due to infrastructure problems (such as CPU contention). Third, it proposes DRACO, to manage overload problems arising in novel large-scale multi-tier applications, such as complex stateful network functions in which the state is spread across modern key-value stores to achieve both scalability and performance. DRACO performs a fine-grained admission control, by tuning the amount and type of traffic according to datastore node dependencies among the tiers (which are dynamically discovered at run-time), and to the current capacity of individual nodes, in order to mitigate overloads and preventing hot-spots. This thesis presents the implementation details and an extensive experimental evaluation for all the above overload management solutions, by means of a virtualized IP Multimedia Subsystem (IMS), which provides modern multimedia services for Telco operators, such as Videoconferencing and VoLTE, and which is one of the top use-cases of the NFV technology

Wireless Sensor Networks

The aim of this book is to present few important issues of WSNs, from the application, design and technology points of view. The book highlights power efficient design issues related to wireless sensor networks, the existing WSN applications, and discusses the research efforts being undertaken in this field which put the reader in good pace to be able to understand more advanced research and make a contribution in this field for themselves. It is believed that this book serves as a comprehensive reference for graduate and undergraduate senior students who seek to learn latest development in wireless sensor networks