Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

Reconfigurable Architecture for Elliptic Curve Cryptography Using FPGA

The high performance of an elliptic curve (EC) crypto system depends efficiently on the arithmetic in the underlying finite field. We have to propose and compare three levels of Galois Field , , and . The proposed architecture is based on Lopez-Dahab elliptic curve point multiplication algorithm, which uses Gaussian normal basis for field arithmetic. The proposed is based on an efficient Montgomery add and double algorithm, also the Karatsuba-Ofman multiplier and Itoh-Tsujii algorithm are used as the inverse component. The hardware design is based on optimized finite state machine (FSM), with a single cycle 193 bits multiplier, field adder, and field squarer. The another proposed architecture is based on applications for which compactness is more important than speed. The FPGA’s dedicated multipliers and carry-chain logic are used to obtain the small data path. The different optimization at the hardware level improves the acceleration of the ECC scalar multiplication, increases frequency and the speed of operation such as key generation, encryption, and decryption. Finally, we have to implement our design using Xilinx XC4VLX200 FPGA device

Customisable arithmetic hardware designs

Imperial Users onl

An Energy-Efficient Reconfigurable DTLS Cryptographic Engine for Securing Internet-of-Things Applications

This paper presents the first hardware implementation of the Datagram Transport Layer Security (DTLS) protocol to enable end-to-end security for the Internet of Things (IoT). A key component of this design is a reconfigurable prime field elliptic curve cryptography (ECC) accelerator, which is 238x and 9x more energy-efficient compared to software and state-of-the-art hardware respectively. Our full hardware implementation of the DTLS 1.3 protocol provides 438x improvement in energy-efficiency over software, along with code size and data memory usage as low as 8 KB and 3 KB respectively. The cryptographic accelerators are coupled with an on-chip low-power RISC-V processor to benchmark applications beyond DTLS with up to two orders of magnitude energy savings. The test chip, fabricated in 65 nm CMOS, demonstrates hardware-accelerated DTLS sessions while consuming 44.08 uJ per handshake, and 0.89 nJ per byte of encrypted data at 16 MHz and 0.8 V.Comment: Published in IEEE Journal of Solid-State Circuits (JSSC

Efficient implementation of elliptic curve cryptography.

Elliptic Curve Cryptosystems (ECC) were introduced in 1985 by Neal Koblitz and Victor Miller. Small key size made elliptic curve attractive for public key cryptosystem implementation. This thesis introduces solutions of efficient implementation of ECC in algorithmic level and in computation level. In algorithmic level, a fast parallel elliptic curve scalar multiplication algorithm based on a dual-processor hardware system is developed. The method has an average computation time of n3 Elliptic Curve Point Addition on an n-bit scalar. The improvement is n Elliptic Curve Point Doubling compared to conventional methods. When a proper coordinate system and binary representation for the scalar k is used the average execution time will be as low as n Elliptic Curve Point Doubling, which makes this method about two times faster than conventional single processor multipliers using the same coordinate system. In computation level, a high performance elliptic curve processor (ECP) architecture is presented. The processor uses parallelism in finite field calculation to achieve high speed execution of scalar multiplication algorithm. The architecture relies on compile-time detection rather than of run-time detection of parallelism which results in less hardware. Implemented on FPGA, the proposed processor operates at 66MHz in GF(2 167) and performs scalar multiplication in 100muSec, which is considerably faster than recent implementations.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .A57. Source: Masters Abstracts International, Volume: 44-03, page: 1446. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

Under Quantum Computer Attack: Is Rainbow a Replacement of RSA and Elliptic Curves on Hardware?

Among cryptographic systems, multivariate signature is one of the most popular candidates since it has the potential to resist quantum computer attacks. Rainbow belongs to the multivariate signature, which can be viewed as a multilayer unbalanced Oil-Vinegar system. In this paper, we present techniques to exploit Rainbow signature on hardware meeting the requirements of efficient high-performance applications. We propose a general architecture for efficient hardware implementations of Rainbow and enhance our design in three directions. First, we present a fast inversion based on binary trees. Second, we present an efficient multiplication based on compact construction in composite fields. Third, we present a parallel solving system of linear equations based on Gauss-Jordan elimination. Via further other minor optimizations and by integrating the major improvement above, we implement our design in composite fields on standard cell CMOS Application Specific Integrated Circuits (ASICs). The experimental results show that our implementation takes 4.9 us and 242 clock cycles to generate a Rainbow signature with the frequency of 50 MHz. Comparison results show that our design is more efficient than the RSA and ECC implementations

Cryptography Engine Design for IEEE 1609.2 WAVE Secure Vehicle Communication using FPGA

Department Of Electrical EngineeringIn this paper, we implement the IEEE 1609.2 secure vehicle communication (VC) standard using FPGA by fast and efficient ways. Nowadays, smart vehicle get nearer to our everyday life. Therefore, design of safety smart vehicle is critical issue in this field. For this reason, secure VC is must implemented into the smart vehicle to support safety service. However, secure process in VC has significant overhead to communication between objectives. Because of this overhead, if circumjacent vehicles are increased, communication overhead of VC is exponentially increased along the number of adjacent vehicles. To remove this kind of overhead, we design fast and efficient IEEE 1609.2 cryptography engine using FPGA. This engine consists of AES-CCM encryption, SHA-256 hash function, Hash_DRBG random bit generator, and ECDSA digital signature algorithm and each algorithm is analyzed carefully and optimized with specific technics. For the AES-CCM, we optimized AES encryption engine. First, we use 32-bit S-box structure to remove 8-bit operation of AES. Second, we employ the key save register file architecture to reduce frequently key expansion operation when input of key value is always same for AES encryption engine. Third, to protect external attacks, we use internal register files to save processed data. Finally, we design parallel architecture for both CBC-MAC and counter in AES-CCM algorithm. SHA-256 hash function is frequently used in ECDSA algorithm that is significant reason of optimization. So, we use parallel architecture for the preprocessing block and the hash computation block. And, we design latest schedule block to reduce usage of register and combinational logics. In ECDSA, Hash-DRBG is used to generate key value and signature for vehicle message. To make Hash-DRBG, we use our SHA-256 design much fast generation of random value. ECDSA is most critical and complex module in our cryptography engine. For this module, we use affine representation of elliptic curve in ECDSA. So, we can replace the prime arithmetic operation by right shift operation and bit operation. And, we implement scalar multiplier to optimize arithmetic operation of ECDSA. This kind of replacement is hardware kindly, so we can reduce complexity of ECDSA hardware design. To implement all of algorithm in IEEE 1609.2 standard, we use Xilinx Virtex-5 FPGA chip with ISE 14.6 synthesis tool and Verilog-HDL.ope

Constructing cluster of simple FPGA boards for cryptologic computations

In this paper, we propose an FPGA cluster infrastructure, which can be utilized in implementing cryptanalytic attacks and accelerating cryptographic operations. The cluster can be formed using simple and inexpensive, off-the-shelf FPGA boards featuring an FPGA device, local storage, CPLD, and network connection. Forming the cluster is simple and no effort for the hardware development is needed except for the hardware design for the actual computation. Using a softcore processor on FPGA, we are able to configure FPGA devices dynamically and change their configuration on the fly from a remote computer. The softcore on FPGA can execute relatively complicated programs for mundane tasks unworthy of FPGA resources. Finally, we propose and implement a fast and efficient dynamic configuration switch technique that is shown to be useful especially in cryptanalytic applications. Our infrastructure provides a cost-effective alternative for formerly proposed cryptanalytic engines based on FPGA devices

Novel Area-Efficient and Flexible Architectures for Optimal Ate Pairing on FPGA

While FPGA is a suitable platform for implementing cryptographic algorithms, there are several challenges associated with implementing Optimal Ate pairing on FPGA, such as security, limited computing resources, and high power consumption. To overcome these issues, this study introduces three approaches that can execute the optimal Ate pairing on Barreto-Naehrig curves using Jacobean coordinates with the goal of reaching 128-bit security on the Genesys board. The first approach is a pure software implementation utilizing the MicroBlaze processor. The second involves a combination of software and hardware, with key operations in $F_{p}$ and $F_{p^{2}}$ being transformed into IP cores for the MicroBlaze. The third approach builds on the second by incorporating parallelism to improve the pairing process. The utilization of multiple MicroBlaze processors within a single system offers both versatility and parallelism to speed up pairing calculations. A variety of methods and parameters are used to optimize the pairing computation, including Montgomery modular multiplication, the Karatsuba method, Jacobean coordinates, the Complex squaring method, sparse multiplication, squaring in $G_{\phi 6}F_{p^{12}}$, and the addition chain method. The proposed systems are designed to efficiently utilize limited resources in restricted environments, while still completing tasks in a timely manner.Comment: 13 pages, 8 figures, and 5 table