A case for merging the ILP and DLP paradigms

The goal of this paper is to show that instruction level parallelism (ILP) and data-level parallelism (DLP) can be merged in a single architecture to execute vectorizable code at a performance level that can not be achieved using either paradigm on its own. We will show that the combination of the two techniques yields very high performance at a low cost and a low complexity. We will show that this architecture can reach a performance equivalent to a superscalar processor that sustained 10 instructions per cycle. We will see that the machine exploiting both types of parallelism improves upon the ILP-only machine by factors of 1.5-1.8. We also present a study on the scalability of both paradigms and show that, when we increase resources to reach a 16-issue machine, the advantage of the ILP+DLP machine over the ILP-only machine increases up to 2.0-3.45. While the peak achieved IPC for the ILP machine is 4, the ILP+DLP machine exceeds 10 instructions per cycle.Peer ReviewedPostprint (published version

A configurable vector processor for accelerating speech coding algorithms

The growing demand for voice-over-packer (VoIP) services and multimedia-rich applications has made increasingly important the efficient, real-time implementation of low-bit rates speech coders on embedded VLSI platforms. Such speech coders are designed to substantially reduce the bandwidth requirements thus enabling dense multichannel gateways in small form factor. This however comes at a high computational cost which mandates the use of very high performance embedded processors. This thesis investigates the potential acceleration of two major ITU-T speech coding algorithms, namely G.729A and G.723.1, through their efficient implementation on a configurable extensible vector embedded CPU architecture. New scalar and vector ISAs were introduced which resulted in up to 80% reduction in the dynamic instruction count of both workloads. These instructions were subsequently encapsulated into a parametric, hybrid SISD (scalar processor)–SIMD (vector) processor. This work presents the research and implementation of the vector datapath of this vector coprocessor which is tightly-coupled to a Sparc-V8 compliant CPU, the optimization and simulation methodologies employed and the use of Electronic System Level (ESL) techniques to rapidly design SIMD datapaths

An automated OpenCL FPGA compilation framework targeting a configurable, VLIW chip multiprocessor

Modern system-on-chips augment their baseline CPU with coprocessors and accelerators to increase overall computational capacity and power efficiency, and thus have evolved into heterogeneous systems. Several languages have been developed to enable this paradigm shift, including CUDA and OpenCL. This thesis discusses a unified compilation environment to enable heterogeneous system design through the use of OpenCL and a customised VLIW chip multiprocessor (CMP) architecture, known as the LE1. An LLVM compilation framework was researched and a prototype developed to enable the execution of OpenCL applications on the LE1 CPU. The framework fully automates the compilation flow and supports work-item coalescing to better utilise the CPU cores and alleviate the effects of thread divergence. This thesis discusses in detail both the software stack and target hardware architecture and evaluates the scalability of the proposed framework on a highly precise cycle-accurate simulator. This is achieved through the execution of 12 benchmarks across 240 different machine configurations, as well as further results utilising an incomplete development branch of the compiler. It is shown that the problems generally scale well with the LE1 architecture, up to eight cores, when the memory system becomes a serious bottleneck. Results demonstrate superlinear performance on certain benchmarks (x9 for the bitonic sort benchmark with 8 dual-issue cores) with further improvements from compiler optimisations (x14 for bitonic with the same configuration

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Networks on Chips: From Research to Products

Research on Networks on Chips (NoCs) has spanned over a decade and its results are now visible in some products. Thus the seminal idea of using networking technology to address the chip-level interconnect problem has been shown to be correct. Moreover, as technology scales down in geometry and chips scale up in complexity, NoCs become the essential element to achieve the desired levels of performance and quality of service while curbing power consumption levels. Design and timing closure can only be achieved by a sophisticated set of tools that address NoC synthesis, optimization and validation

Analysis and architectural support for parallel stateful packet processing

The evolution of network services is closely related to the network technology trend. Originally network nodes forwarded packets from a source to a destination in the network by executing lightweight packet processing, or even negligible workloads. As links provide more complex services, packet processing demands the execution of more computational intensive applications. Complex network applications deal with both packet header and payload (i.e. packet contents) to provide upper layer network services, such as enhanced security, system utilization policies, and video on demand management.Applications that provide complex network services arise two key capabilities that differ from the low layer network applications: a) deep packet inspection examines the packet payload tipically searching for a matching string or regular expression, and b) stateful processing keeps track information of previous packet processing, unlike other applications that don't keep any data about other packet processing. In most cases, deep packet inspection also integrates stateful processing.Computer architecture researches aim to maximize the system throughput to sustain the required network processing performance as well as other demands, such as memory and I/O bandwidth. In fact, there are different processor architectures depending on the sharing degree of hardware resources among streams (i.e. hardware context). Multicore architectures present multiple processing engines within a single chip that share cache levels of memory hierarchy and interconnection network. Multithreaded architectures integrates multiple streams in a single processing engine sharing functional units, register file, fecth unit, and inner levels of cache hierarchy. Scalable multicore multithreaded architectures emerge as a solution to overcome the requirements of high throughput systems. We call massively multithreaded architectures to the architectures that comprise tens to hundreds of streams distributed across multiple cores on a chip. Nevertheless, the efficient utilization of these architectures depends on the application characteristics. On one hand, emerging network applications show large computational workloads with significant variations in the packet processing behavior. Then, it is important to analyze the behavior of each packet processing to optimally assign packets to threads (i.e. software context) for reducing any negative interaction among them. On the other hand, network applications present Packet Level Parallelism (PLP) in which several packets can be processed in parallel. As in other paradigms, dependencies among packets limit the amount of PLP. Lower network layer applications show negligible packet dependencies. In contrast, complex upper network applications show dependencies among packets leading to reduce the amount of PLP.In this thesis, we address the limitations of parallelism in stateful network applications to maximize the throughput of advanced network devices. This dissertation comprises three complementary sets of contributions focused on: network analysis, workload characterization and architectural proposal.The network analysis evaluates the impact of network traffic on stateful network applications. We specially study the impact of network traffic aggregation on memory hierarchy performance. We categorize and characterize network applications according to their data management. The results point out that stateful processing presents reduced instruction level parallelism and high rate of long latency memory accesses. Our analysis reveal that stateful applications expose a variety of levels of parallelism related to stateful data categories. Thus, we propose the MultiLayer Processing (MLP) as an execution model to exploit multiple levels of parallelism. The MLP is a thread migration based mechanism that increases the sinergy among streams in the memory hierarchy and alleviates the contention in critical sections of parallel stateful workloads

Hardware design of task superscalar architecture

Exploiting concurrency to achieve greater performance is a difficult and important challenge for current high performance systems. Although the theory is plain, the complexity of traditional parallel programming models in most cases impedes the programmer to harvest performance. Several partitioning granularities have been proposed to better exploit concurrency at task granularity. In this sense, different dynamic software task management systems, such as task-based dataflow programming models, benefit dataflow principles to improve task-level parallelism and overcome the limitations of static task management systems. These models implicitly schedule computation and data and use tasks instead of instructions as a basic work unit, thereby relieving the programmer of explicitly managing parallelism. While these programming models share conceptual similarities with the well-known Out-of-Order superscalar pipelines (e.g., dynamic data dependency analysis and dataflow scheduling), they rely on software-based dependency analysis, which is inherently slow, and limits their scalability when there is fine-grained task granularity and a large amount of tasks. The aforementioned problem increases with the number of available cores. In order to keep all the cores busy and accelerate the overall application performance, it becomes necessary to partition it into more and smaller tasks. The task scheduling (i.e., creation and management of the execution of tasks) in software introduces overheads, and so becomes increasingly inefficient with the number of cores. In contrast, a hardware scheduling solution can achieve greater speed-ups as a hardware task scheduler requires fewer cycles than the software version to dispatch a task. The Task Superscalar is a hybrid dataflow/von-Neumann architecture that exploits the task level parallelism of the program. The Task Superscalar combines the effectiveness of Out-of-Order processors together with the task abstraction, and thereby provides an unified management layer for CMPs which effectively employs processors as functional units. The Task Superscalar has been implemented in software with limited parallelism and high memory consumption due to the nature of the software implementation. In this thesis, a Hardware Task Superscalar architecture is designed to be integrated in a future High Performance Computer with the ability to exploit fine-grained task parallelism. The main contributions of this thesis are: (1) a design of the operational flow of Task Superscalar architecture adapted and improved for hardware implementation, (2) a HDL prototype for latency exploration, (3) a full cycle-accurate simulator of the Hardware Task Superscalar (based on the previously obtained latencies), (4) full design space exploration of the Task Superscalar component configuration (number and size) for systems with different number of processing elements (cores), (5) comparison with a software implementation of a real task-based programming model runtime using real benchmarks, and (6) hardware resource usage exploration of the selected configurations.Explotar la concurrencia para conseguir un mejor rendimiento es un reto importante y difícil para los sistemas de alto rendimiento. Aunque la teoría es sencilla, en muchos casos la complejidad de los modelos de programación paralela tradicionales impide al programador obtener un buen rendimiento. Se han propuesto diferentes granularidades de particionamiento de tareas para explotar mejor la concurrencia implícita en las aplicaciones. En este sentido, diferentes sistemas software de manejo dinámico de tareas utilizan los principios de ejecución "dataflow" para mejorar el paralelismo a nivel de tarea y superar el rendimiento de los sistemas de planificación estáticos. Estos modelos planfican la ejecución dinámicamente y utilizan tareas, en lugar de instrucciones, como unidad básica de trabajo. De esta forma descargan al programador de tener que realizar la sincronización de las tareas explícitamente en su programa. Aunque estos modelos de programación comparten muchas similitudes con los bien conocidos procesadores fuera de orden (como el análisis dinámico de dependencias y la ejecución en "dataflow"), dependen de un análisis dinámico software de las dependencias. Dicho análisis es inherentemente lento y limita la escalabilidad cuando hay un gran número de tareas pequeñas. Los problemas antes mencionados se incrementan exponencialmente con el número de núcleos disponibles. Para conseguir mantener todos los núcleos ocupados y conseguir acelerar el rendimiento global de la aplicación se hace necesario particionarla en muchas tareas pequeñas. La gestión de dichas tareas (es decir, su creación y distribución entre los núcleos) en software introduce sobrecostes, y por tanto resulta ineficiente conforme aumenta el número de núcleos. En contraposición, un sistema hardware de planificación de tareas puede conseguir mejores rendimientos ya que requiere una menor latencia en la gestión de las tareas. El Task Superscalar (TSS) es una arquitectura híbrida dataflow/von-Neumann que explota el paralelismo a nivel de tareas de los programas. El TSS combina la efectividad de los procesadores fuera de orden con la abstracción de tarea, y por tanto provee una capa unificada de gestión para los CMPs que gestiona los núcleos como unidades funcionales. Previo al trabajo de esta tesis el Task Superscalar se había implementado en software con un paralelismo limitado y mucho consumo de memoria debido a las limitaciones inherentes de una implementación software. En esta tesis se diseñado una implementación hardware de la arquitectura Task Superscalar con capacidad para manejar muchas tareas de pequeño tamaño que es integrable en un futuro computador de altas prestaciones. Así pues, las contribuciones principales de esta tesis son: (1) el diseño de un flujo operacional de la arquitectura Task Superscalar adaptado y mejorado para su implementación hardware; (2) un prototipo HDL de dicho flujo para la exploración de las latencias asociadas a la implementación hardware; (3) un simulador ciclo a ciclo del diseño hardware basado en los resultados obtenidos en la implementación hardware; (4) una exploración completa del espacio de diseño de los componentes hardware (número y cantidad de módulos, tamaños de las memorias, etc.) para diferentes tamaños de computadores (es decir, para diferentes cantidades de nucleos); (5) una comparación con la implementación software actual del mismo modelo de programación utilizando aplicaciones reales y; (6) una exploración de la utilización de recursos hardware de las diferentes configuraciones seleccionadas