Digital flight control and landing system for the CH-46C helicopter Final report

Systems analysis of flight control and guidance of CH-46C helicopte

A sub-mW IoT-endnode for always-on visual monitoring and smart triggering

This work presents a fully-programmable Internet of Things (IoT) visual sensing node that targets sub-mW power consumption in always-on monitoring scenarios. The system features a spatial-contrast $128\mathrm{x}64$ binary pixel imager with focal-plane processing. The sensor, when working at its lowest power mode ($10\mu W$ at 10 fps), provides as output the number of changed pixels. Based on this information, a dedicated camera interface, implemented on a low-power FPGA, wakes up an ultra-low-power parallel processing unit to extract context-aware visual information. We evaluate the smart sensor on three always-on visual triggering application scenarios. Triggering accuracy comparable to RGB image sensors is achieved at nominal lighting conditions, while consuming an average power between $193\mu W$ and $277\mu W$, depending on context activity. The digital sub-system is extremely flexible, thanks to a fully-programmable digital signal processing engine, but still achieves 19x lower power consumption compared to MCU-based cameras with significantly lower on-board computing capabilities.Comment: 11 pages, 9 figures, submitteted to IEEE IoT Journa

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

The Cost of Application-Class Processing: Energy and Performance Analysis of a Linux-Ready 1.7-GHz 64-Bit RISC-V Core in 22-nm FDSOI Technology

The open-source RISC-V instruction set architecture (ISA) is gaining traction, both in industry and academia. The ISA is designed to scale from microcontrollers to server-class processors. Furthermore, openness promotes the availability of various open-source and commercial implementations. Our main contribution in this paper is a thorough power, performance, and efficiency analysis of the RISC-V ISA targeting baseline "application class" functionality, i.e., supporting the Linux OS and its application environment based on our open-source single-issue in-order implementation of the 64-bit ISA variant (RV64GC) called Ariane. Our analysis is based on a detailed power and efficiency analysis of the RISC-V ISA extracted from silicon measurements and calibrated simulation of an Ariane instance (RV64IMC) taped-out in GlobalFoundries 22FDX technology. Ariane runs at up to 1.7-GHz, achieves up to 40-Gop/sW energy efficiency, which is superior to similar cores presented in the literature. We provide insight into the interplay between functionality required for the application-class execution (e.g., virtual memory, caches, and multiple modes of privileged operation) and energy cost. We also compare Ariane with RISCY, a simpler and a slower microcontroller-class core. Our analysis confirms that supporting application-class execution implies a nonnegligible energy-efficiency loss and that compute performance is more cost-effectively boosted by instruction extensions (e.g., packed SIMD) rather than the high-frequency operation

Chapter One – An Overview of Architecture-Level Power- and Energy-Efficient Design Techniques

Power dissipation and energy consumption became the primary design constraint for almost all computer systems in the last 15 years. Both computer architects and circuit designers intent to reduce power and energy (without a performance degradation) at all design levels, as it is currently the main obstacle to continue with further scaling according to Moore's law. The aim of this survey is to provide a comprehensive overview of power- and energy-efficient “state-of-the-art” techniques. We classify techniques by component where they apply to, which is the most natural way from a designer point of view. We further divide the techniques by the component of power/energy they optimize (static or dynamic), covering in that way complete low-power design flow at the architectural level. At the end, we conclude that only a holistic approach that assumes optimizations at all design levels can lead to significant savings.Peer ReviewedPostprint (published version

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era

Power-constrained aware and latency-aware microarchitectural optimizations in many-core processors

As the transistor budgets outpace the power envelope (the power-wall issue), new architectural and microarchitectural techniques are needed to improve, or at least maintain, the power efficiency of next-generation processors. Run-time adaptation, including core, cache and DVFS adaptations, has recently emerged as a promising area to keep the pace for acceptable power efficiency. However, none of the adaptation techniques proposed so far is able to provide good results when we consider the stringent power budgets that will be common in the next decades, so new techniques that attack the problem from several fronts using different specialized mechanisms are necessary. The combination of different power management mechanisms, however, bring extra levels of complexity, since other factors such as workload behavior and run-time conditions must also be considered to properly allocate power among cores and threads. To address the power issue, this thesis first proposes Chrysso, an integrated and scalable model-driven power management that quickly selects the best combination of adaptation methods out of different core and uncore micro-architecture adaptations, per-core DVFS, or any combination thereof. Chrysso can quickly search the adaptation space by making performance/power projections to identify Pareto-optimal configurations, effectively pruning the search space. Chrysso achieves 1.9x better chip performance over core-level gating for multi-programmed workloads, and 1.5x higher performance for multi-threaded workloads. Most existing power management schemes use a centralized approach to regulate power dissipation. Unfortunately, the complexity and overhead of centralized power management increases significantly with core count rendering it in-viable at fine-grain time slices. The work leverages a two-tier hierarchical power manager. This solution is highly scalable with low overhead on a tiled many-core architecture with shared LLC and per-tile DVFS at fine-grain time slices. The global power is first distributed across tiles using GPM and then within a tile (in parallel across all tiles). Additionally, this work also proposes DVFS and cache-aware thread migration (DCTM) to ensure optimum per-tile co-scheduling of compatible threads at runtime over the two-tier hierarchical power manager. DCTM outperforms existing solutions by up to 12% on adaptive many-core tile processor. With the advancements in the core micro-architectural techniques and technology scaling, the performance gap between the computational component and memory component is increasing significantly (the memory-wall issue). To bridge this gap, the architecture community is pushing forward towards multi-core architecture with on-die near-memory DRAM cache memory (faster than conventional DRAM). Gigascale DRAM Caches poses a problem of how to efficiently manage the tags. The Tags-in-DRAM designs aims at efficiently co-locate tags with data, but it still suffer from high latency especially in multi-way associativity. The thesis finally proposes Tag Cache mechanism, an on-chip distributed tag caching mechanism with limited space and latency overhead to bypass the tag read operation in multi-way DRAM Caches, thereby reducing hit latency. Each Tag Cache, stored in L2, stores tag information of the most recently used DRAM Cache ways. The Tag Cache is able to exploit temporal locality of the DRAM Cache, thereby contributing to on average 46% of the DRAM Cache hits.A mesura que el consum dels transistors supera el nivell de potència desitjable es necessiten noves tècniques arquitectòniques i microarquitectòniques per millorar, o almenys mantenir, l'eficiència energètica dels processadors de les pròximes generacions. L'adaptació en temps d'execució, tant de nuclis com de les cachés, així com també adaptacions DVFS són idees que han sorgit recentment que fan preveure que sigui un àrea prometedora per mantenir un ritme d'eficiència energètica acceptable. Tanmateix, cap de les tècniques d'adaptació proposades fins ara és capaç d'oferir bons resultats si tenim en compte les restriccions estrictes de potència que seran comuns a les pròximes dècades. És convenient definir noves tècniques que ataquin el problema des de diversos fronts utilitzant diferents mecanismes especialitzats. La combinació de diferents mecanismes de gestió d'energia porta aparellada nivells addicionals de complexitat, ja que altres factors com ara el comportament de la càrrega de treball així com condicions específiques de temps d'execució també han de ser considerats per assignar adequadament la potència entre els nuclis del sistema computador. Per tractar el tema de la potència, aquesta tesi proposa en primer lloc Chrysso, una administració d'energia integrada i escalable que selecciona ràpidament la millor combinació entre diferents adaptacions microarquitectòniques. Chrysso pot buscar ràpidament l'adaptació adequada al fer projeccions òptimes de rendiment i potència basades en configuracions de Pareto, permetent així reduir de manera efectiva l'espai de cerca. Chrysso arriba a un rendiment de 1,9 sobre tècniques convencionals d'inhibició de portes amb una càrrega d'aplicacions seqüencials; i un rendiment de 1,5 quan les aplicacions corresponen a programes parla·lels. La majoria dels sistemes de gestió d'energia existents utilitzen un enfocament centralitzat per regular la dissipació d'energia. Malauradament, la complexitat i el temps d'administració s'incrementen significativament amb una gran quantitat de nuclis. En aquest treball es defineix un gestor jeràrquic de potència basat en dos nivells. Aquesta solució és altament escalable amb baix cost operatiu en una arquitectura de múltiples nuclis integrats en clústers, amb memòria caché de darrer nivell compartida a nivell de cluster, i DVFS establert en intervals de temps de gra fi a nivell de clúster. La potència global es distribueix en primer lloc a través dels clústers utilitzant GPM i després es distribueix dins un clúster (en paral·lel si es consideren tots els clústers). A més, aquest treball també proposa DVFS i migració de fils conscient de la memòria caché (DCTM) que garanteix una òptima distribució de tasques entre els nuclis. DCTM supera les solucions existents fins a un 12%. Amb els avenços en la tecnologia i les tècniques de micro-arquitectura de nuclis, la diferència de rendiment entre el component computacional i la memòria està augmentant significativament. Per omplir aquest buit, s'està avançant cap a arquitectures de múltiples nuclis amb memòries caché integrades basades en DRAM. Aquestes memòries caché DRAM a gran escala plantegen el problema de com gestionar de forma eficaç les etiquetes. Els dissenys de cachés amb dades i etiquetes juntes són un primer pas, però encara pateixen per tenir una alta latència, especialment en cachés amb un grau alt d'associativitat. En aquesta tesi es proposa l'estudi d'una tècnica anomenada Tag Cache, un mecanisme distribuït d'emmagatzematge d'etiquetes, que redueix la latència de les operacions de lectura d'etiquetes en les memòries caché DRAM. Cada Tag Cache, que resideix a L2, emmagatzema la informació de les vies que s'han accedit recentment de les memòries caché DRAM. D'aquesta manera es pot aprofitar la localitat temporal d'una caché DRAM, fet que contribueix en promig en un 46% dels encerts en les caché DRAM