Reconfigurable media coding: a new specification model for multimedia coders

Multimedia coding technology, after about 20 years of active research, has delivered a rich variety of different and complex coding algorithms. Selecting an appropriate subset of these algorithms would, in principle, enable a designer to produce the codec supporting any desired functionality as well as any desired trade-off between compression performance and implementation complexity. Currently, interoperability demands that this selection process be hard-wired into the normative descriptions of the codec, or at a lower level, into a predefined number of choices, known as profiles, codified within each standard specification. This paper presents an alternative paradigm for codec deployment that is currently under development by MPEG, known as Reconfigurable Media Coding (RMC). Using the RMC framework, arbitrary combinations of fundamental algorithms may be assembled, without predefined standardization, because everything necessary for specifying the decoding process is delivered alongside the content itself. This side-information consists of a description of the bitstream syntax, as well as a description of the decoder configuration. Decoder configuration information is provided as a description of the interconnections between algorithmic blocks. The approach has been validated by development of an RMC format that matches MPEG-4 Video, and then extending the format by adding new chroma-subsampling patterns

MPEG Reconfigurable Video Coding: From specification to a reconfigurable implementation

International audienceThis paper demonstrates that it is possible to produce automatic, reconfigurable, and portable implementations of multimedia decoders onto platforms with the help of the MPEG Reconfigurable Video Coding (RVC) standard. MPEG RVC is a new formalism standardized by the MPEGconsortium used to specify multimedia decoders. It produces visual representations of decoder reference software, with the help of graphs that connect several coding tools from MPEG standards. The approach developed in this paper draws on Dataflow Process Networks to produce a Minimal and Canonical Representation (MCR) of \MPEG\ \RVC\ specifications. The \MCR\ makes it possible to form automatic and reconfigurable implementations of decoders which can match any actual platforms. The contribution is demonstrated on one case study where a generic decoder needs to process a multimedia content with the help of the \RVC\ specification of the decoder required to process it. The overall approach is tested on two decoders from MPEG, namely MPEG-4 part 2 Simple Profile and MPEG-4 part 10 Constrained Baseline Profile. The results validate the following benefits on the \MCR\ of decoders: compact representation, low overhead induced by its compilation, reconfiguration and multi-core abilities

Contributions to reconfigurable video coding and low bit rate video coding

In this PhD Thesis, two different issues on video coding are stated and their corresponding proposed solutions discussed. In the first place, some problems of the use of video coding standards are identi ed and the potential of new reconfigurable platforms is put to the test. Specifically, the proposal from MPEG for a Reconfigurable Video Coding (RVC) standard is compared with a more ambitious proposal for Fully Configurable Video Coding (FCVC). In both cases, the objective is to nd a way for the definition of new video codecs without the concurrence of a classical standardization process, in order to reduce the time-to-market of new ideas while maintaining the proper interoperability between codecs. The main difference between these approaches is the ability of FCVC to reconfigure each program line in the encoder and decoder definition, while RVC only enables to conform the codec description from a database of standardized functional units. The proof of concept carried out in the FCVC prototype enabled to propose the incorporation of some of the FCVC capabilities in future versions of the RVC standard. The second part of the Thesis deals with the design and implementation of a filtering algorithm in a hybrid video encoder in order to simplify the high frequencies present in the prediction residue, which are the most expensive for the encoder in terms of output bit rate. By means of this filtering, the quantization scale employed by the video encoder in low bit rate is kept in reasonable values and the risk of appearance of encoding artifacts is reduced. The proposed algorithm includes a block for filter control that determines the proper amount of filtering from the encoder operating point and the characteristics of the sequence to be processed. This filter control is tuned according to perceptual considerations related with overall subjective quality assessment. Finally, the complete algorithm was tested by means of a standard subjective video quality assessment test, and the results showed a noticeable improvement in the quality score with respect to the non-filtered version, confirming that the proposed method reduces the presence of harmful low bit rate artifacts

Algorithms for compression of high dynamic range images and video

The recent advances in sensor and display technologies have brought upon the High Dynamic Range (HDR) imaging capability. The modern multiple exposure HDR sensors can achieve the dynamic range of 100-120 dB and LED and OLED display devices have contrast ratios of 10^5:1 to 10^6:1. Despite the above advances in technology the image/video compression algorithms and associated hardware are yet based on Standard Dynamic Range (SDR) technology, i.e. they operate within an effective dynamic range of up to 70 dB for 8 bit gamma corrected images. Further the existing infrastructure for content distribution is also designed for SDR, which creates interoperability problems with true HDR capture and display equipment. The current solutions for the above problem include tone mapping the HDR content to fit SDR. However this approach leads to image quality associated problems, when strong dynamic range compression is applied. Even though some HDR-only solutions have been proposed in literature, they are not interoperable with current SDR infrastructure and are thus typically used in closed systems. Given the above observations a research gap was identified in the need for efficient algorithms for the compression of still images and video, which are capable of storing full dynamic range and colour gamut of HDR images and at the same time backward compatible with existing SDR infrastructure. To improve the usability of SDR content it is vital that any such algorithms should accommodate different tone mapping operators, including those that are spatially non-uniform. In the course of the research presented in this thesis a novel two layer CODEC architecture is introduced for both HDR image and video coding. Further a universal and computationally efficient approximation of the tone mapping operator is developed and presented. It is shown that the use of perceptually uniform colourspaces for internal representation of pixel data enables improved compression efficiency of the algorithms. Further proposed novel approaches to the compression of metadata for the tone mapping operator is shown to improve compression performance for low bitrate video content. Multiple compression algorithms are designed, implemented and compared and quality-complexity trade-offs are identified. Finally practical aspects of implementing the developed algorithms are explored by automating the design space exploration flow and integrating the high level systems design framework with domain specific tools for synthesis and simulation of multiprocessor systems. The directions for further work are also presented

Decoder Hardware Architecture for HEVC

This chapter provides an overview of the design challenges faced in the implementation of hardware HEVC decoders. These challenges can be attributed to the larger and diverse coding block sizes and transform sizes, the larger interpolation filter for motion compensation, the increased number of steps in intra prediction and the introduction of a new in-loop filter. Several solutions to address these implementation challenges are discussed. As a reference, results for an HEVC decoder test chip are also presented.Texas Instruments Incorporate

CAL Dataflow Components For an MPEG RVC AVC Baseline Encoder

In this paper, an efficient H.264/AVC baseline encoder, described in RVC-CAL actor language, is introduced. The main aim of the paper is two folds: a) to demonstrate the flexibility and ease that is provided by RVC-CAL, which allows for efficient implementation of the presented encoder, and b) to shed light on the advantages that can be brought into the RVC framework by including such encoding tools. The main modules of the designed encoder include: Inter Frame Prediction (Motion Estimation/Compensation), Intra Frame Prediction, and Entropy Coding. Descriptions of the designed modules, accompanied with RVC-CAL design issues are provided. A comparison between different development approaches is also provided. The obtained results show that specifying complex video codecs (e.g. H.264/AVC encoder) using RVC-CAL followed by automatic translation into HDL, which is achievable by the tools that support the standard, results in more efficient HW implementation compared to the traditional HW design flow. A discussion that explains the reasons behind such results concludes the paper

Quality of Service Controlled Multimedia Transport Protocol

PhDThis research looks at the design of an open transport protocol that supports a range of services including multimedia over low data-rate networks. Low data-rate multimedia applications require a system that provides quality of service (QoS) assurance and flexibility. One promising field is the area of content-based coding. Content-based systems use an array of protocols to select the optimum set of coding algorithms. A content-based transport protocol integrates a content-based application to a transmission network. General transport protocols form a bottleneck in low data-rate multimedia communicationbsy limiting throughpuot r by not maintainingt iming requirementsT. his work presents an original model of a transport protocol that eliminates the bottleneck by introducing a flexible yet efficient algorithm that uses an open approach to flexibility and holistic architectureto promoteQ oS.T he flexibility andt ransparenccyo mesi n the form of a fixed syntaxt hat providesa seto f transportp rotocols emanticsT. he mediaQ oSi s maintained by defining a generic descriptor. Overall, the structure of the protocol is based on a single adaptablea lgorithm that supportsa pplication independencen, etwork independencea nd quality of service. The transportp rotocol was evaluatedth rougha set of assessmentos:f f-line; off-line for a specific application; and on-line for a specific application. Application contexts used MPEG-4 test material where the on-line assessmenuts eda modified MPEG-4 pl; yer. The performanceo f the QoSc ontrolledt ransportp rotocoli s often bettert hano thers chemews hen appropriateQ oS controlledm anagemenatl gorithmsa re selectedT. his is shownf irst for an off-line assessmenwt here the performancei s compared between the QoS controlled multiplexer,a n emulatedM PEG-4F lexMux multiplexers chemea, ndt he targetr equirements. The performanceis also shownt o be better in a real environmentw hen the QoS controlled multiplexeri s comparedw ith the real MPEG-4F lexMux scheme

CAL Dataflow Components for an MPEG RVC AVC Baseline Encoder

In this paper, an efficient H.264/AVC baseline encoder, described in RVC-CAL actor language, is introduced. The main aim of the paper is twofold: a) to demonstrate the flexibility and ease that is provided by RVC-CAL, which allows for efficient implementation of the presented encoder, and b) to shed light on the advantages that can be brought into the RVC framework by including such encoding tools. The main modules of the designed encoder include: Inter Frame Prediction (Motion Estimation/Compensation), Intra Frame Prediction, and Entropy Coding. Descriptions of the designed modules, accompanied with RVC-CAL design issues are provided. A comparison between different development approaches is also provided. The obtained results show that specifying complex video codecs (e.g. H.264/AVC encoder) using RVC-CAL followed by automatic translation into HDL, which is achievable by the tools that support the standard, results in more efficient HW implementation compared to the traditional HW design flow. A discussion that explains the reasons behind such results concludes the pape

Description-driven Adaptation of Media Resources

The current multimedia landscape is characterized by a significant diversity in terms of available media formats, network technologies, and device properties. This heterogeneity has resulted in a number of new challenges, such as providing universal access to multimedia content. A solution for this diversity is the use of scalable bit streams, as well as the deployment of a complementary system that is capable of adapting scalable bit streams to the constraints imposed by a particular usage environment (e.g., the limited screen resolution of a mobile device). This dissertation investigates the use of an XML-driven (Extensible Markup Language) framework for the format-independent adaptation of scalable bit streams. Using this approach, the structure of a bit stream is first translated into an XML description. In a next step, the resulting XML description is transformed to reflect a desired adaptation of the bit stream. Finally, the transformed XML description is used to create an adapted bit stream that is suited for playback in the targeted usage environment. The main contribution of this dissertation is BFlavor, a new tool for exposing the syntax of binary media resources as an XML description. Its development was inspired by two other technologies, i.e. MPEG-21 BSDL (Bitstream Syntax Description Language) and XFlavor (Formal Language for Audio-Visual Object Representation, extended with XML features). Although created from a different point of view, both languages offer solutions for translating the syntax of a media resource into an XML representation for further processing. BFlavor (BSDL+XFlavor) harmonizes the two technologies by combining their strengths and eliminating their weaknesses. The expressive power and performance of a BFlavor-based content adaptation chain, compared to tool chains entirely based on either BSDL or XFlavor, were investigated by several experiments. One series of experiments targeted the exploitation of multi-layered temporal scalability in H.264/AVC, paying particular attention to the use of sub-sequences and hierarchical coding patterns, as well as to the use of metadata messages to communicate the bit stream structure to the adaptation logic. BFlavor was the only tool to offer an elegant and practical solution for XML-driven adaptation of H.264/AVC bit streams in the temporal domain