Scalable hardware memory disambiguation

This dissertation deals with one of the long-standing problems in Computer Architecture – the problem of memory disambiguation. Microprocessors typically reorder memory instructions during execution to improve concurrency. Such microprocessors use hardware memory structures for memory disambiguation, known as LoadStore Queues (LSQs), to ensure that memory instruction dependences are satisfied even when the memory instructions execute out-of-order. A typical LSQ implementation (circa 2006) holds all in-flight memory instructions in a physically centralized LSQ and performs a fully associative search on all buffered instructions to ensure that memory dependences are satisfied. These LSQ implementations do not scale because they use large, fully associative structures, which are known to be slow and power hungry. The increasing trend towards distributed microarchitectures further exacerbates these problems. As on-chip wire delays increase and high-performance processors become necessarily distributed, centralized structures such as the LSQ can limit scalability. This dissertation describes techniques to create scalable LSQs in both centralized and distributed microarchitectures. The problems and solutions described in this thesis are motivated and validated by real system designs. The dissertation starts with a description of the partitioned primary memory system of the TRIPS processor, of which the LSQ is an important component, and then through a series of optimizations describes how the power, area, and centralization problems of the LSQ can be solved with minor performance losses (if at all) even for large number of in flight memory instructions. The four solutions described in this dissertation — partitioning, filtering, late binding and efficient overflow management — enable power-, area-efficient, distributed and scalable LSQs, which in turn enable aggressive large-window processors capable of simultaneously executing thousands of instructions. To mitigate the power problem, we replaced the power-hungry, fully associative search with a power-efficient hash table lookup using a simple address-based Bloom filter. Bloom filters are probabilistic data structures used for testing set membership and can be used to quickly check if an instruction with the same data address is likely to be found in the LSQ without performing the associative search. Bloom filters typically eliminate more than 80% of the associative searches and they are highly effective because in most programs, it is uncommon for loads and stores to have the same data address and be in execution simultaneously. To rectify the area problem, we observe the fact that only a small fraction of all memory instructions are dependent, that only such dependent instructions need to be buffered in the LSQ, and that these instructions need to be in the LSQ only for certain parts of the pipelined execution. We propose two mechanisms to exploit these observations. The first mechanism, area filtering, is a hardware mechanism that couples Bloom filters and dependence predictors to dynamically identify and buffer only those instructions which are likely to be dependent. The second mechanism, late binding, reduces the occupancy and hence size of the LSQ. Both of these optimizations allows the number of LSQ slots to be reduced by up to one-half compared to a traditional organization without any performance degradation. Finally, we describe a new decentralized LSQ design for handling LSQ structural hazards in distributed microarchitectures. Decentralization of LSQs, and to a large extent distributed microarchitectures with memory speculation, has proved to be impractical because of the high performance penalties associated with the mechanisms for dealing with hazards. To solve this problem, we applied classic flow-control techniques from interconnection networks for handling resource con- flicts. The first method, memory-side buffering, buffers the overflowing instructions in a separate buffer near the LSQs. The second scheme, execution-side NACKing, sends the overflowing instruction back to the issue window from which it is later re-issued. The third scheme, network buffering, uses the buffers in the interconnection network between the execution units and memory to hold instructions when the LSQ is full, and uses virtual channel flow control to avoid deadlocks. The network buffering scheme is the most robust of all the overflow schemes and shows less than 1% performance degradation due to overflows for a subset of SPEC CPU 2000 and EEMBC benchmarks on a cycle-accurate simulator that closely models the TRIPS processor. The techniques proposed in this dissertation are independent, architectureneutral and their cumulative benefits result in LSQs that can be partitioned at a fine granularity and have low design complexity. Each of these partitions selectively buffers only memory instructions with true dependences and can be closely coupled with the execution units thus minimizing power, area, and latency. Such LSQ designs with near-ideal characteristics are well suited for microarchitectures with thousands of instructions in-flight and may enable even more aggressive microarchitectures in the future.Computer Science

A configurable vector processor for accelerating speech coding algorithms

The growing demand for voice-over-packer (VoIP) services and multimedia-rich applications has made increasingly important the efficient, real-time implementation of low-bit rates speech coders on embedded VLSI platforms. Such speech coders are designed to substantially reduce the bandwidth requirements thus enabling dense multichannel gateways in small form factor. This however comes at a high computational cost which mandates the use of very high performance embedded processors. This thesis investigates the potential acceleration of two major ITU-T speech coding algorithms, namely G.729A and G.723.1, through their efficient implementation on a configurable extensible vector embedded CPU architecture. New scalar and vector ISAs were introduced which resulted in up to 80% reduction in the dynamic instruction count of both workloads. These instructions were subsequently encapsulated into a parametric, hybrid SISD (scalar processor)–SIMD (vector) processor. This work presents the research and implementation of the vector datapath of this vector coprocessor which is tightly-coupled to a Sparc-V8 compliant CPU, the optimization and simulation methodologies employed and the use of Electronic System Level (ESL) techniques to rapidly design SIMD datapaths

Runtime-assisted optimizations in the on-chip memory hierarchy

Following Moore's Law, the number of transistors on chip has been increasing exponentially, which has led to the increasing complexity of modern processors. As a result, the efficient programming of such systems has become more difficult. Many programming models have been developed to answer this issue. Of particular interest are task-based programming models that employ simple annotations to define parallel work in an application. The information available at the level of the runtime systems associated with these programming models offers great potential for improving hardware design. Moreover, due to technological limitations, Moore's Law is predicted to eventually come to an end, so novel paradigms are necessary to maintain the current performance improvement trends. The main goal of this thesis is to exploit the knowledge about a parallel application available at the runtime system level to improve the design of the on-chip memory hierarchy. The coupling of the runtime system and the microprocessor enables a better hardware design without hurting the programmability. The first contribution is a set of insertion policies for shared last-level caches that exploit information about tasks and task data dependencies. The intuition behind this proposal revolves around the observation that parallel threads exhibit different memory access patterns. Even within the same thread, accesses to different variables often follow distinct patterns. The proposed policies insert cache lines into different logical positions depending on the dependency type and task type to which the corresponding memory request belongs. The second proposal optimizes the execution of reductions, defined as a programming pattern that combines input data to form the resulting reduction variable. This is achieved with a runtime-assisted technique for performing reductions in the processor's cache hierarchy. The proposal's goal is to be a universally applicable solution regardless of the reduction variable type, size and access pattern. On the software level, the programming model is extended to let a programmer specify the reduction variables for tasks, as well as the desired cache level where a certain reduction will be performed. The source-to-source compiler and the runtime system are extended to translate and forward this information to the underlying hardware. On the hardware level, private and shared caches are equipped with functional units and the accompanying logic to perform reductions at the cache level. This design avoids unnecessary data movements to the core and back as the data is operated at the place where it resides. The third contribution is a runtime-assisted prioritization scheme for memory requests inside the on-chip memory hierarchy. The proposal is based on the notion of a critical path in the context of parallel codes and a known fact that accelerating critical tasks reduces the execution time of the whole application. In the context of this work, task criticality is observed at a level of a task type as it enables simple annotation by the programmer. The acceleration of critical tasks is achieved by the prioritization of corresponding memory requests in the microprocessor.Siguiendo la ley de Moore, el número de transistores en los chips ha crecido exponencialmente, lo que ha comportado una mayor complejidad en los procesadores modernos y, como resultado, de la dificultad de la programación eficiente de estos sistemas. Se han desarrollado muchos modelos de programación para resolver este problema; un ejemplo particular son los modelos de programación basados en tareas, que emplean anotaciones sencillas para definir los Trabajos paralelos de una aplicación. La información de que disponen los sistemas en tiempo de ejecución (runtime systems) asociada con estos modelos de programación ofrece un enorme potencial para la mejora del diseño del hardware. Por otro lado, las limitaciones tecnológicas hacen que la ley de Moore pueda dejar de cumplirse próximamente, por lo que se necesitan paradigmas nuevos para mantener las tendencias actuales de mejora de rendimiento. El objetivo principal de esta tesis es aprovechar el conocimiento de las aplicaciones paral·leles de que dispone el runtime system para mejorar el diseño de la jerarquía de memoria del chip. El acoplamiento del runtime system junto con el microprocesador permite realizar mejores diseños hardware sin afectar Negativamente en la programabilidad de dichos sistemas. La primera contribución de esta tesis consiste en un conjunto de políticas de inserción para las memorias caché compartidas de último nivel que aprovecha la información de las tareas y las dependencias de datos entre estas. La intuición tras esta propuesta se basa en la observación de que los hilos de ejecución paralelos muestran distintos patrones de acceso a memoria e, incluso dentro del mismo hilo, los accesos a diferentes variables a menudo siguen patrones distintos. Las políticas que se proponen insertan líneas de caché en posiciones lógicas diferentes en función de los tipos de dependencia y tarea a los que corresponde la petición de memoria. La segunda propuesta optimiza la ejecución de las reducciones, que se definen como un patrón de programación que combina datos de entrada para conseguir la variable de reducción como resultado. Esto se consigue mediante una técnica asistida por el runtime system para la realización de reducciones en la jerarquía de la caché del procesador, con el objetivo de ser una solución aplicable de forma universal sin depender del tipo de la variable de la reducción, su tamaño o el patrón de acceso. A nivel de software, el modelo de programación se extiende para que el programador especifique las variables de reducción de las tareas, así como el nivel de caché escogido para que se realice una determinada reducción. El compilador fuente a Fuente (compilador source-to-source) y el runtime ssytem se modifican para que traduzcan y pasen esta información al hardware subyacente, evitando así movimientos de datos innecesarios hacia y desde el núcleo del procesador, al realizarse la operación donde se encuentran los datos de la misma. La tercera contribución proporciona un esquema de priorización asistido por el runtime system para peticiones de memoria dentro de la jerarquía de memoria del chip. La propuesta se basa en la noción de camino crítico en el contexto de los códigos paralelos y en el hecho conocido de que acelerar tareas críticas reduce el tiempo de ejecución de la aplicación completa. En el contexto de este trabajo, la criticidad de las tareas se considera a nivel del tipo de tarea ya que permite que el programador las indique mediante anotaciones sencillas. La aceleración de las tareas críticas se consigue priorizando las correspondientes peticiones de memoria en el microprocesador.Seguint la llei de Moore, el nombre de transistors que contenen els xips ha patit un creixement exponencial, fet que ha provocat un augment de la complexitat dels processadors moderns i, per tant, de la dificultat de la programació eficient d’aquests sistemes. Per intentar solucionar-ho, s’han desenvolupat diversos models de programació; un exemple particular en són els models basats en tasques, que fan servir anotacions senzilles per definir treballs paral·lels dins d’una aplicació. La informació que hi ha al nivell dels sistemes en temps d’execució (runtime systems) associada amb aquests models de programació ofereix un gran potencial a l’hora de millorar el disseny del maquinari. D’altra banda, les limitacions tecnològiques fan que la llei de Moore pugui deixar de complir-se properament, per la qual cosa calen nous paradigmes per mantenir les tendències actuals en la millora de rendiment. L’objectiu principal d’aquesta tesi és aprofitar els coneixements que el runtime System té d’una aplicació paral·lela per millorar el disseny de la jerarquia de memòria dins el xip. L’acoblament del runtime system i el microprocessador permet millorar el disseny del maquinari sense malmetre la programabilitat d’aquests sistemes. La primera contribució d’aquesta tesi consisteix en un conjunt de polítiques d’inserció a les memòries cau (cache memories) compartides d’últim nivell que aprofita informació sobre tasques i les dependències de dades entre aquestes. La intuïció que hi ha al darrere d’aquesta proposta es basa en el fet que els fils d’execució paral·lels mostren diferents patrons d’accés a la memòria; fins i tot dins el mateix fil, els accessos a variables diferents sovint segueixen patrons diferents. Les polítiques que s’hi proposen insereixen línies de la memòria cau a diferents ubicacions lògiques en funció dels tipus de dependència i de tasca als quals correspon la petició de memòria. La segona proposta optimitza l’execució de les reduccions, que es defineixen com un patró de programació que combina dades d’entrada per aconseguir la variable de reducció com a resultat. Això s’aconsegueix mitjançant una tècnica assistida pel runtime system per dur a terme reduccions en la jerarquia de la memòria cau del processador, amb l’objectiu que la proposta sigui aplicable de manera universal, sense dependre del tipus de la variable a la qual es realitza la reducció, la seva mida o el patró d’accés. A nivell de programari, es realitza una extensió del model de programació per facilitar que el programador especifiqui les variables de les reduccions que usaran les tasques, així com el nivell de memòria cau desitjat on s’hauria de realitzar una certa reducció. El compilador font a font (compilador source-to-source) i el runtime system s’amplien per traduir i passar aquesta informació al maquinari subjacent. A nivell de maquinari, les memòries cau privades i compartides s’equipen amb unitats funcionals i la lògica corresponent per poder dur a terme les reduccions a la pròpia memòria cau, evitant així moviments de dades innecessaris entre el nucli del processador i la jerarquia de memòria. La tercera contribució proporciona un esquema de priorització assistit pel runtime System per peticions de memòria dins de la jerarquia de memòria del xip. La proposta es basa en la noció de camí crític en el context dels codis paral·lels i en el fet conegut que l’acceleració de les tasques que formen part del camí crític redueix el temps d’execució de l’aplicació sencera. En el context d’aquest treball, la criticitat de les tasques s’observa al nivell del seu tipus ja que permet que el programador les indiqui mitjançant anotacions senzilles. L’acceleració de les tasques crítiques s’aconsegueix prioritzant les corresponents peticions de memòria dins el microprocessador

Optimal Global Instruction Scheduling for the Itanium® Processor Architecture

On the Itanium 2 processor, effective global instruction scheduling is crucial to high performance. At the same time, it poses a challenge to the compiler: This code generation subtask involves strongly interdependent decisions and complex trade-offs that are difficult to cope with for heuristics. We tackle this NP-complete problem with integer linear programming (ILP), a search-based method that yields provably optimal results. This promises faster code as well as insights into the potential of the architecture. Our ILP model comprises global code motion with compensation copies, predication, and Itanium-specific features like control/data speculation. In integer linear programming, well-structured models are the key to acceptable solution times. The feasible solutions of an ILP are represented by integer points inside a polytope. If all vertices of this polytope are integral, then the ILP can be solved in polynomial time. We define two subproblems of global scheduling in which some constraint classes are omitted and show that the corresponding two subpolytopes of our ILP model are integral and polynomial sized. This substantiates that the found model is of high efficiency, which is also confirmed by the reasonable solution times. The ILP formulation is extended by further transformations like cyclic code motion, which moves instructions upwards out of a loop, circularly in the opposite direction of the loop backedges. Since the architecture requires instructions to be encoded in fixed-sized bundles of three, a bundler is developed that computes bundle sequences of minimal size by means of precomputed results and dynamic programming. Experiments have been conducted with a postpass tool that implements the ILP scheduler. It parses assembly procedures generated by Intel�s Itanium compiler and reschedules them as a whole. Using this tool, we optimize a selection of hot functions from the SPECint 2000 benchmark. The results show a significant speedup over the original code.Globale Instruktionsanordnung hat beim Itanium-2-Prozessor großen Einfluß auf die Leistung und stellt dabei gleichzeitig eine Herausforderung für den Compiler dar: Sie ist mit zahlreichen komplexen, wechselseitig voneinander abhängigen Entscheidungen verbunden, die für Heuristiken nur schwer zu beherrschen sind.Wir lösen diesesNP-vollständige Problem mit ganzzahliger linearer Programmierung (ILP), einer suchbasierten Methode mit beweisbar optimalen Ergebnissen. Das ermöglicht neben schnellerem Code auch Einblicke in das Potential der Itanium- Prozessorarchitektur. Unser ILP-Modell umfaßt globale Codeverschiebungen mit Kompensationscode, Prädikation und Itanium-spezifische Techniken wie Kontroll- und Datenspekulation. Bei ganzzahliger linearer Programmierung sind wohlstrukturierte Modelle der Schlüssel zu akzeptablen Lösungszeiten. Die zulässigen Lösungen eines ILPs werden durch ganzzahlige Punkte innerhalb eines Polytops repräsentiert. Sind die Eckpunkte dieses Polytops ganzzahlig, kann das ILP in Polynomialzeit gelöst werden. Wir definieren zwei Teilprobleme globaler Instruktionsanordnung durch Auslassung bestimmter Klassen von Nebenbedingungen und beweisen, daß die korrespondierenden Teilpolytope unseres ILP-Modells ganzzahlig und von polynomieller Größe sind. Dies untermauert die hohe Effizienz des gefundenen Modells, die auch durch moderate Lösungszeiten bestätigt wird. Das ILP-Modell wird um weitere Transformationen wie zyklische Codeverschiebung erweitert; letztere bezeichnet das Verschieben von Befehlen aufwärts aus einer Schleife heraus, in Gegenrichtung ihrer Rückwärtskanten. Da die Architektur eine Kodierung der Befehle in Dreierbündeln fester Größe vorschreibt, wird ein Bundler entwickelt, der Bündelsequenzen minimaler Länge mit Hilfe vorberechneter Teilergebnisse und dynamischer Programmierung erzeugt. Für die Experimente wurde ein Postpassoptimierer erstellt. Er liest von Intels Itanium-Compiler erzeugte Assemblerroutinen ein und ordnet die enthaltenen Instruktionen mit Hilfe der ILP-Methode neu an. Angewandt auf eine Auswahl von Funktionen aus dem Benchmark SPECint 2000 erreicht der Optimierer eine signifikante Beschleunigung gegenüber dem Originalcode

A computing origami: Optimized code generation for emerging parallel platforms

Ph.DDOCTOR OF PHILOSOPH

Design of Efficient TLB-based Data Classification Mechanisms in Chip Multiprocessors

Most of the data referenced by sequential and parallel applications running in current chip multiprocessors are referenced by a single thread, i.e., private. Recent proposals leverage this observation to improve many aspects of chip multiprocessors, such as reducing coherence overhead or the access latency to distributed caches. The effectiveness of those proposals depends to a large extent on the amount of detected private data. However, the mechanisms proposed so far either do not consider either thread migration or the private use of data within different application phases, or do entail high overhead. As a result, a considerable amount of private data is not detected. In order to increase the detection of private data, this thesis proposes a TLB-based mechanism that is able to account for both thread migration and private application phases with low overhead. Classification status in the proposed TLB-based classification mechanisms is determined by the presence of the page translation stored in other core's TLBs. The classification schemes are analyzed in multilevel TLB hierarchies, for systems with both private and distributed shared last-level TLBs. This thesis introduces a page classification approach based on inspecting other core's TLBs upon every TLB miss. In particular, the proposed classification approach is based on exchange and count of tokens. Token counting on TLBs is a natural and efficient way for classifying memory pages. It does not require the use of complex and undesirable persistent requests or arbitration, since when two ormore TLBs race for accessing a page, tokens are appropriately distributed classifying the page as shared. However, TLB-based ability to classify private pages is strongly dependent on TLB size, as it relies on the presence of a page translation in the system TLBs. To overcome that, different TLB usage predictors (UP) have been proposed, which allow a page classification unaffected by TLB size. Specifically, this thesis introduces a predictor that obtains system-wide page usage information by either employing a shared last-level TLB structure (SUP) or cooperative TLBs working together (CUP).La mayor parte de los datos referenciados por aplicaciones paralelas y secuenciales que se ejecutan enCMPs actuales son referenciadas por un único hilo, es decir, son privados. Recientemente, algunas propuestas aprovechan esta observación para mejorar muchos aspectos de los CMPs, como por ejemplo reducir el sobrecoste de la coherencia o la latencia de los accesos a cachés distribuidas. La efectividad de estas propuestas depende en gran medida de la cantidad de datos que son considerados privados. Sin embargo, los mecanismos propuestos hasta la fecha no consideran la migración de hilos de ejecución ni las fases de una aplicación. Por tanto, una cantidad considerable de datos privados no se detecta apropiadamente. Con el fin de aumentar la detección de datos privados, proponemos un mecanismo basado en las TLBs, capaz de reclasificar los datos a privado, y que detecta la migración de los hilos de ejecución sin añadir complejidad al sistema. Los mecanismos de clasificación en las TLBs se han analizado en estructuras de varios niveles, incluyendo TLBs privadas y con un último nivel de TLB compartido y distribuido. Esta tesis también presenta un mecanismo de clasificación de páginas basado en la inspección de las TLBs de otros núcleos tras cada fallo de TLB. De forma particular, el mecanismo propuesto se basa en el intercambio y el cuenteo de tokens (testigos). Contar tokens en las TLBs supone una forma natural y eficiente para la clasificación de páginas de memoria. Además, evita el uso de solicitudes persistentes o arbitraje alguno, ya que si dos o más TLBs compiten para acceder a una página, los tokens se distribuyen apropiadamente y la clasifican como compartida. Sin embargo, la habilidad de los mecanismos basados en TLB para clasificar páginas privadas depende del tamaño de las TLBs. La clasificación basada en las TLBs se basa en la presencia de una traducción en las TLBs del sistema. Para evitarlo, se han propuesto diversos predictores de uso en las TLBs (UP), los cuales permiten una clasificación independiente del tamaño de las TLBs. En concreto, esta tesis presenta un sistema mediante el que se obtiene información de uso de página a nivel de sistema con la ayuda de un nivel de TLB compartida (SUP) o mediante TLBs cooperando juntas (CUP).La major part de les dades referenciades per aplicacions paral·leles i seqüencials que s'executen en CMPs actuals són referenciades per un sol fil, és a dir, són privades. Recentment, algunes propostes aprofiten aquesta observació per a millorar molts aspectes dels CMPs, com és reduir el sobrecost de la coherència o la latència d'accés a memòries cau distribuïdes. L'efectivitat d'aquestes propostes depen en gran mesura de la quantitat de dades detectades com a privades. No obstant això, els mecanismes proposats fins a la data no consideren la migració de fils d'execució ni les fases d'una aplicació. Per tant, una quantitat considerable de dades privades no es detecta apropiadament. A fi d'augmentar la detecció de dades privades, aquesta tesi proposa un mecanisme basat en les TLBs, capaç de reclassificar les dades com a privades, i que detecta la migració dels fils d'execució sense afegir complexitat al sistema. Els mecanismes de classificació en les TLBs s'han analitzat en estructures de diversos nivells, incloent-hi sistemes amb TLBs d'últimnivell compartides i distribuïdes. Aquesta tesi presenta un mecanisme de classificació de pàgines basat en inspeccionar les TLBs d'altres nuclis després de cada fallada de TLB. Concretament, el mecanisme proposat es basa en l'intercanvi i el compte de tokens. Comptar tokens en les TLBs suposa una forma natural i eficient per a la classificació de pàgines de memòria. A més, evita l'ús de sol·licituds persistents o arbitratge, ja que si dues o més TLBs competeixen per a accedir a una pàgina, els tokens es distribueixen apropiadament i la classifiquen com a compartida. No obstant això, l'habilitat dels mecanismes basats en TLB per a classificar pàgines privades depenen de la grandària de les TLBs. La classificació basada en les TLBs resta en la presència d'una traducció en les TLBs del sistema. Per a evitar-ho, s'han proposat diversos predictors d'ús en les TLBs (UP), els quals permeten una classificació independent de la grandària de les TLBs. Específicament, aquesta tesi introdueix un predictor que obté informació d'ús de la pàgina a escala de sistema mitjançant un nivell de TLB compartida (SUP) or mitjançant TLBs cooperant juntes (CUP).Esteve García, A. (2017). Design of Efficient TLB-based Data Classification Mechanisms in Chip Multiprocessors [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86136TESI

Vector-thread architecture and implementation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 181-186).This thesis proposes vector-thread architectures as a performance-efficient solution for all-purpose computing. The VT architectural paradigm unifies the vector and multithreaded compute models. VT provides the programmer with a control processor and a vector of virtual processors. The control processor can use vector-fetch commands to broadcast instructions to all the VPs or each VP can use thread-fetches to direct its own control flow. A seamless intermixing of the vector and threaded control mechanisms allows a VT architecture to flexibly and compactly encode application parallelism and locality. VT architectures can efficiently exploit a wide variety of loop-level parallelism, including non-vectorizable loops with cross-iteration dependencies or internal control flow. The Scale VT architecture is an instantiation of the vector-thread paradigm designed for low-power and high-performance embedded systems. Scale includes a scalar RISC control processor and a four-lane vector-thread unit that can execute 16 operations per cycle and supports up to 128 simultaneously active virtual processor threads. Scale provides unit-stride and strided-segment vector loads and stores, and it implements cache refill/access decoupling. The Scale memory system includes a four-port, non-blocking, 32-way set-associative, 32 KB cache. A prototype Scale VT processor was implemented in 180 nm technology using an ASIC-style design flow. The chip has 7.1 million transistors and a core area of 16.6 mm2, and it runs at 260 MHz while consuming 0.4-1.1 W. This thesis evaluates Scale using a diverse selection of embedded benchmarks, including example kernels for image processing, audio processing, text and data processing, cryptography, network processing, and wireless communication.(cont.) Larger applications also include a JPEG image encoder and an IEEE 802.11 la wireless transmitter. Scale achieves high performance on a range of different types of codes, generally executing 3-11 compute operations per cycle. Unlike other architectures which improve performance at the expense of increased energy consumption, Scale is generally even more energy efficient than a scalar RISC processor.by Ronny Meir Krashinsky.Ph.D

Compiler techniques for scalable performance of stream programs on multicore architectures

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 211-222).Given the ubiquity of multicore processors, there is an acute need to enable the development of scalable parallel applications without unduly burdening programmers. Currently, programmers are asked not only to explicitly expose parallelism but also concern themselves with issues of granularity, load-balancing, synchronization, and communication. This thesis demonstrates that when algorithmic parallelism is expressed in the form of a stream program, a compiler can effectively and automatically manage the parallelism. Our compiler assumes responsibility for low-level architectural details, transforming implicit algorithmic parallelism into a mapping that achieves scalable parallel performance for a given multicore target. Stream programming is characterized by regular processing of sequences of data, and it is a natural expression of algorithms in the areas of audio, video, digital signal processing, networking, and encryption. Streaming computation is represented as a graph of independent computation nodes that communicate explicitly over data channels. Our techniques operate on contiguous regions of the stream graph where the input and output rates of the nodes are statically determinable. Within a static region, the compiler first automatically adjusts the granularity and then exploits data, task, and pipeline parallelism in a holistic fashion. We introduce techniques that data-parallelize nodes that operate on overlapping sliding windows of their input, translating serializing state into minimal and parametrized inter-core communication. Finally, for nodes that cannot be data-parallelized due to state, we are the first to automatically apply software-pipelining techniques at a coarse granularity to exploit pipeline parallelism between stateful nodes. Our framework is evaluated in the context of the StreamIt programming language. StreamIt is a high-level stream programming language that has been shown to improve programmer productivity in implementing streaming algorithms. We employ the StreamIt Core benchmark suite of 12 real-world applications to demonstrate the effectiveness of our techniques for varying multicore architectures. For a 16-core distributed memory multicore, we achieve a 14.9x mean speedup. For benchmarks that include sliding-window computation, our sliding-window data-parallelization techniques are required to enable scalable performance for a 16-core SMP multicore (14x mean speedup) and a 64-core distributed shared memory multicore (52x mean speedup).by Michael I. Gordon.Ph.D