High Step-Down Bridgeless Sepic/Cuk PFC Rectifiers With Improved Efficiency and Reduced Current Stress

In this article, two high step-down bridgeless power factor correction rectifiers based on the switched inductor network (SIN) are introduced. The proposed rectifiers employ the SIN to provide high step-down voltage gain with a higher duty cycle than the competitors. They also offer higher efficiency, lower current stress, and total peak switching device powers. A thorough and straightforward design algorithm in the discontinuous conduction mode is provided that ensures a unity power factor and a low total harmonic distortion with a simple control scheme. As a demonstration of the superior performance of the proposed rectifiers, a 300-W high-gain sepic rectifier setup with 48Vdc output voltage from a 230Vrms/50Hz source is built in the laboratory

A design of LED driver circuit for reducing production cost in Thailand industry

In this paper, the designing of a modified flyback converter circuit for 100 Watts LED lighting has been demonstrated. Some important factors, i.e. efficiency (ɛ), power factor (PF), and total harmonic current distortion (THDi), are considered for interpreting the performance of the proposed circuit. A commercial driver circuit which an efficiency of 94% and price of ∼2,000 THB has, consequently, been employed as a reference circuit. Two experimental setups, performance investigation and cost analysis, have been demonstrated for confirming the concept designed. However, the experimental results shown that an efficiency of the developed driver is 93.93%, while the implementation cost is 1,257 THB respectively. Compared with the reference circuit, we found that the performance of modified flyback circuit is almost equivalent in any parameters, while the cost is cheaper than the reference of 37.15%. This implies that there is a possibility to transfer the knowledge of designing concept to mass production for Thailand industry. In addition, it would thus be reduced the investment cost by the importation driver circuits from other countries and also to support Thailand industry for producing the high quality goods for exporting aboard

An efficient self-configurable driver for color light emitting diode

To arrange an accurate load current for the different sets of color LEDs, an efficient LED driver must facilitate the current sharing among the LED strings using a constant current source. Effective utilization of power in an LED string is vital for display panels as it defines the magnitude of the undesirable phenomenon of flickering switching. An efficient and dimmable LED driver suitable for LED back-light drivers in the LED display panel is presented in this thesis. This thesis proposed a color LEDs driver with a self-configuration of the enhanced current mirror in multiple LED strings. In this proposed work, the load currents have been efficiently balanced among the identical and unequal loads of color LEDs. In a traditional current mirror, the buck converter is linked with a fixed current load. Nonetheless, in the proposed improved self-adjustable current mirror, the variation of LEDs load string could be addressed using a single buck converter. The improvement is based on the combinational circuits of transistor and op-amp with proper scheme biasing. The improved dimming circuit is then proposed for exploiting the range of dimming at the string and module level. Furthermore, the proposed current-balancing circuits excluded a separate power supply to control current in different load strings of LEDs (red/green/blue). Since the approach circuit is identical and modular, it could be scaled to any number of parallel current sources. The different bi-level pulsating driving have been performed to reduce the loss while running the LEDs at the high peak current. It is to create two driving parameters, which are the low/high current levels (pulse width modulation) and associated duty cycles, in having the capability to control luminosity effectively. It can be seen, the previous techniques had improved the luminous efficacy of LEDs by using n-level driving techniques but at the trade-off of losing efficiency with the introduction of resistors (variables in series) to create a bi-level phenomenon for the driver. Therefore, this thesis proposes to replace the resistors with the new approach dimming circuit to get a significant improvement in the overall system’s efficiency that can assist to dim an individual LEDs string based on designated color (red or green or blue) LEDs. Meanwhile, in improving illuminance through dimming, the hybridization of pulse width modulated (PWM) and amplitude modulated (AM) has been proposed. As a result, the proposed LEDs driver has shown effective current balancing through the color LEDs string with exploiting a large dimming range. The illumination analysis has also shown a significantly higher when compared with PWM (bi-level pulsating). The computation efficiency for red, green, and blue LEDs strings around range 92% to 99%

Multiple-output DC–DC converters: applications and solutions

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required. The interest and importance of this type of multiport configuration is also reflected in that many electronics manufacturers currently develop integrated solutions. Traditionally, the different output voltages required are obtained by means of a transformer with several windings, which are in addition to providing electrical isolation. However, the current trend in the development of multiple-output DC–DC converters follows general aspects, such as low losses, high-power density, and high efficiency, as well as the development of new architectures and control strategies. Certainly, simple structures with a reduced number of components and power switches will be one of the new trends, especially to reduce the size. In this sense, the incorporation of devices with a Wide Band Gap (WBG), particularly Gallium Nitride (GaN) and Silicon Carbide (SiC), will establish future trends, advantages, and disadvantages in the development and applications of multiple-output DC–DC converters. In this paper, we present a review of the most important topics related to multiple-output DC–DC converters based on their main topologies and configurations, applications, solutions, and trends. A wide variety of configurations and topologies of multiple-output DC–DC converters are shown (more than 30), isolated and non-isolated, single and multiple switches, and based on soft and hard switching techniques, which are used in many different applications and solutions.info:eu-repo/semantics/publishedVersio

High-Power-Density Single-Phase Three-Level Flying-Capacitor Buck PFC Rectifier

Active pulsating-power-buffering (PPB) is an effective technique to reduce the energy storage requirement of a single-phase power-factor-correction (PFC) rectifier. Existing single-phase solutions with active PPB, however, generally suffer from high voltage stresses, leading to increased power losses as well as the need for high-voltage-rating semiconductor switches. Previous works have been focusing on two-level switching converter configurations, and thus have failed to address the high-voltage-stress problem. In this paper, a single-phase three-level flying-capacitor PFC rectifier with PPB embedded switching is proposed. The flying capacitor not only clamps the voltage stresses of all power devices but also functions as a PPB capacitor. The operating principles, control methods, and design guidelines are detailed and the feasibility of the proposed converter is verified through a 48-W (48-V/1-A) hardware prototype. The proposed rectifier is shown to achieve nearly 50% reduction of the voltage stresses, 72% reduction of the buffering capacitor's volume and 23.8% reduction of the magnetic core size, as compared to a state-of-the-art two-level solution recently proposed. This new approach of formulating single-phase PFC rectifiers with active PPB could dramatically boost the system's efficiency and power density whilst reducing cost

A comprehensive review on various non-isolated power converter topologies for a light-emitting diode driver

Light-emitting diode (LED) lighting applications aided by an electronic power control have become very attractive in the recent years. For LED lighting applications, it is essential to design a converter with single/multi-output for handling multiple loads. As the LED load is more sensitive to the change in input/converter parameters, it is necessary to regulate the current concerning the design specifications. In this paper, several LED topologies are reviewed with a focus on power density, single/multi-load operation, size, and reliability. Several converter topologies are reviewed and compared in terms of power rating, number of semiconductor switches, isolation, and efficiency. Various modulation techniques used for dimming control are described in brief. The salient features of each converter topology are discussed with the power rating and application for which the topology can be preferred. So, the selection of the power factor correction (PFC) and low source side harmonics converter topology is presented. This paper will be helpful to the researchers who are working on the development of LED drivers

A single-phase three-level flying-capacitor PFC rectifier without electrolytic capacitors

A component-minimized and low-voltage-stress single-phase power factor correction rectifier without electrolytic capacitor is proposed in this paper. Component minimization is achieved by embedding an active pulsating-power-buffering (PPB) function within each switching period, such that typical add-on power electronic circuits for PPB are no longer needed. Additionally, with a three-level flying-capacitor configuration, the voltage stresses of switching devices can be reduced more than 50% as compared to existing solutions that are based on embedded PPB. The relationship between the inductance requirement and the patterns of the modulation carriers, and how it can be utilized to minimize the magnetics of the rectifier, is also discussed. A 110 W hardware prototype is designed and tested to demonstrate the feasibilities of the proposed rectifier. An input power factor of more than 0.97, peak efficiency of 95.1%, and an output voltage ripple of less than 4.3% across a wide load range have been experimentally obtained.</p

Dimming DC–DC LED Drivers: Power Losses, Luminous Efficiency & Best-in-Class

The aim of this research is to analyze, model, and compare dimming techniques for switched-inductor (SL) light-emitting-diode (LED) drivers. LEDs have become pervasive in modern lighting and automotive applications. LED drivers regulate the LED current that sets their luminous output, where dimming is an important attribute. Dimming techniques fall in one of two categories: "analog" or "duty-cycled" (pulse-width-modulated), and duty-cycled (PWM) dimming decompose into two further classes: series- or shut-switched. A comprehensive analysis of dimming techniques, corresponding power losses, and their dimming capabilities for dc-dc applications is lacking in the literature. This research aims to explain and quantify these important parameters, like luminous flux, dimming range, and luminous efficiency. This research reveals and verifies that analog dimming is the most efficient with the widest dimming range.M.S

Photonic low-cost sensors for in-line fluid monitoring. Design methodology

779 p.The paradigm of process monitoring has evolved in the last years, driven by a clear need for improving efficiency, quality and safety of processes and products. Sectors as manufacturing, energy, food and beverages, etc. are fostering the adoption of innovative methods for controlling their processes and products, in a non-destructive, in-place, reliable, fast, accurate and cost-efficient manner. Furthermore, the parameters requested by the industry for the quality assessment are evolving from basic magnitudes as pressures, temperatures, humidity, etc. to complete chemical and physical fingerprints of these products and processes. In this situation, techniques based on the UV/VIS/NIR light-matter interaction appear to be optimum candidates to face the request of the industry. Moreover, at this moment, when we are witnessing a technological revolution in the field of optoelectronic components, which are required for setting up these light-based analyzers.However, being able to integrate these optoelectronic components with the rest of subsystems (electronics, optics, mechanics, hydraulics, data processing, etc.) is not straightforward. The development of these multi-domain and heterogeneous sensor products meeting not just technological but also market objectives poses a considerable technical and organizational challenge for any company.In this context, a methodological hybrid and agile integration of photonic components within the rest of subsystems towards a sensor product development is presented as the main outcome of the thesis. The methodology has been validated in several industrial scenarios, being three of them included in this thesis, which covers from hydraulic fluid quality control to real-time monitoring of alcoholic beverage fermentation process

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc