A feedback-based hybrid OBS/OCS architecture with fast-over-slow capability

Dynamic bandwidth allocation in response to the bandwidth requirements of new emerging applications is an essential demand for future optical networks. Hybrid switching architectures combining the benefits of different switching technologies in a single node are key elements to support wavelength and sub-wavelength granularities. This paper proposes a novel feedback-based hybrid OBS/OCS node architecture that integrates slow (ms regime) and fast (ns regime) switching elements, aiming at flexible bandwidth allocation while reducing the related costs. Such a node utilizes the pre-transmission idle periods of slow elements in order to send those contending fast bursts, thus improving the overall network performance. The obtained simulation results illustrate significant improvement in terms of Burst Loss Rate (BLR), and lower related network costs when compared to previously proposed hybrid OBS/OCS node architectures.Postprint (author’s final draft

Multi-Granular Optical Cross-Connect: Design, Analysis, and Demonstration

A fundamental issue in all-optical switching is to offer efficient and cost-effective transport services for a wide range of bandwidth granularities. This paper presents multi-granular optical cross-connect (MG-OXC) architectures that combine slow (ms regime) and fast (ns regime) switch elements, in order to support optical circuit switching (OCS), optical burst switching (OBS), and even optical packet switching (OPS). The MG-OXC architectures are designed to provide a cost-effective approach, while offering the flexibility and reconfigurability to deal with dynamic requirements of different applications. All proposed MG-OXC designs are analyzed and compared in terms of dimensionality, flexibility/reconfigurability, and scalability. Furthermore, node level simulations are conducted to evaluate the performance of MG-OXCs under different traffic regimes. Finally, the feasibility of the proposed architectures is demonstrated on an application-aware, multi-bit-rate (10 and 40 Gbps), end-to-end OBS testbed

Design of 10 Gb/s burst-mode receivers for high-split extended reach PONs

The continuous stream of new applications for the internet, increases the need for higher access speed in the currently deployed communication networks. Most networks in use today still consist of twisted copper wires, inherited from the telephone network. The disadvantages of reusing the existing telephone network are twofold. Firstly, the bandwidth of twisted copper wires is limited and secondly, a large number of switches and routers are needed throughout the network leading to an excessive power consumption. The hybrid fiber coax network that reuses the television distribution network is not free from these drawbacks. The bandwidth is also limited and power hungry amplifiers are needed to bridge the distance to and from the user. The future of broadband access lies in optical fiber networks. The optical fiber has a virtually unlimited bandwidth and the lower attenuation leads to less switches and amplifiers in the network, reducing the power consumption of the complete infrastructure. This dissertation describes the design of a 10 Gb/s burst-mode receiver for high-split extended reach passive optical networks (PONs). The designed receiver incorporates two very advanced features. Firstly, the burst-mode receiver locks its gain setting within 6 ns avoiding packet loss due to gain switching during data payload reception. Secondly, the burst-mode receiver detects both burst start and burst end, making it the first burst-mode receiver of its kind to operate without any time critical signal requirements from outside the burst-mode receiver. The presented work covers the chip-level architecture study and design of a 10 Gb/s burst-mode transimpedance amplifier and a 10 Gb/s post-amplifier, which are the two most critical components of a burst-mode receiver

A Novel QoS provisioning Scheme for OBS networks

This paper presents Classified Cloning, a novel QoS provisioning mechanism for OBS networks carrying real-time applications (such as video on demand, Voice over IP, online gaming and Grid computing). It provides such applications with a minimum loss rate while minimizing end-to-end delay and jitter. ns-2 has been used as the simulation tool, with new OBS modules having been developed for performance evaluation purposes. Ingress node performance has been investigated, as well as the overall performance of the suggested scheme. The results obtained showed that new scheme has superior performance to classical cloning. In particular, QoS provisioning offers a guaranteed burst loss rate, delay and expected value of jitter, unlike existing proposals for QoS implementation in OBS which use the burst offset time to provide such differentiation. Indeed, classical schemes increase both end-to-end delay and jitter. It is shown that the burst loss rate is reduced by 50% reduced over classical cloning

Service-Oriented Multigranular Optical Network Architecture for Clouds

This paper presents a novel service-oriented network architecture to bridge the informational gap between user applications and optical networks providing technology-agnostic multigranular optical network services for clouds. A mediation layer (service plane) between user applications and network control is proposed to facilitate a mapping process between user application requests and the network services. At the network level, a multigranular optical network (MGON) is proposed and implemented to support dynamic wavelength and subwavelength granularities with different transport formats [optical burst switched (OBS), optical burst transport (OBT)], reservation protocols (one-way, two-way), and different quality-of-service (QoS) levels per service type. The service-oriented multigranular optical network has been designed, implemented, and demonstrated on an experimental testbed. The testbed consists of service and network resource provisioning, service abstraction, and network resource virtualization. The service-to-network interoperation is provided by means of a gateway that maps service requests to technology-specific parameters and a common signaling channel for both service and network resource provisioning

Hybrid Optoelectronic Router for Future Optical Packet‐ Switched Networks

With the growing demand for bandwidth and the need to support new services, several challenges are awaiting future photonic networks. In particular, the performance of current network nodes dominated by electrical routers/switches is seen as a bottleneck that is accentuated by the pressing demand for reducing the network power consumption. With the concept of performing more node functions with optics/optoelectronics, optical packet switching (OPS) provides a promising solution. We have developed a hybrid optoelectronic router (HOPR) prototype that exhibits low power consumption and low latency together with high functionality. The router is enabled by key optical/optoelectronic devices and subsystem technologies that are combined with CMOS electronics in a novel architecture to leverage the strengths of both optics/optoelectronics and electronics. In this chapter, we review our recent HOPR prototype developed for realizing a new photonic intra data center (DC) network. After briefly explaining about the HOPR‐based DC network, we highlight the underlying technologies of the new prototype that enables label processing, switching, and buffering of asynchronous arbitrary‐length 100‐Gbps (25‐Gbps × 4λs) burst‐mode optical packets with enhanced power efficiency and reduced latency

Access and metro network convergence for flexible end-to-end network design

This paper reports on the architectural, protocol, physical layer, and integrated testbed demonstrations carried out by the DISCUS FP7 consortium in the area of access - metro network convergence. Our architecture modeling results show the vast potential for cost and power savings that node consolidation can bring. The architecture, however, also recognizes the limits of long-reach transmission for low-latency 5G services and proposes ways to address such shortcomings in future projects. The testbed results, which have been conducted end-to-end, across access - metro and core, and have targeted all the layers of the network from the application down to the physical layer, show the practical feasibility of the concepts proposed in the project