A Finite Domain Constraint Approach for Placement and Routing of Coarse-Grained Reconfigurable Architectures

Scheduling, placement, and routing are important steps in Very Large Scale Integration (VLSI) design. Researchers have developed numerous techniques to solve placement and routing problems. As the complexity of Application Specific Integrated Circuits (ASICs) increased over the past decades, so did the demand for improved place and route techniques. The primary objective of these place and route approaches has typically been wirelength minimization due to its impact on signal delay and design performance. With the advent of Field Programmable Gate Arrays (FPGAs), the same place and route techniques were applied to FPGA-based design. However, traditional place and route techniques may not work for Coarse-Grained Reconfigurable Architectures (CGRAs), which are reconfigurable devices offering wider path widths than FPGAs and more flexibility than ASICs, due to the differences in architecture and routing network. Further, the routing network of several types of CGRAs, including the Field Programmable Object Array (FPOA), has deterministic timing as compared to the routing fabric of most ASICs and FPGAs reported in the literature. This necessitates a fresh look at alternative approaches to place and route designs. This dissertation presents a finite domain constraint-based, delay-aware placement and routing methodology targeting an FPOA. The proposed methodology takes advantage of the deterministic routing network of CGRAs to perform a delay aware placement

Algorithms and Architectures for Secure Embedded Multimedia Systems

Embedded multimedia systems provide real-time video support for applications in entertainment (mobile phones, internet video websites), defense (video-surveillance and tracking) and public-domain (tele-medicine, remote and distant learning, traffic monitoring and management). With the widespread deployment of such real-time embedded systems, there has been an increasing concern over the security and authentication of concerned multimedia data. While several (software) algorithms and hardware architectures have been proposed in the research literature to support multimedia security, these fail to address embedded applications whose performance specifications have tighter constraints on computational power and available hardware resources. The goals of this dissertation research are two fold: 1. To develop novel algorithms for joint video compression and encryption. The proposed algorithms reduce the computational requirements of multimedia encryption algorithms. We propose an approach that uses the compression parameters instead of compressed bitstream for video encryption. 2. Hardware acceleration of proposed algorithms over reconfigurable computing platforms such as FPGA and over VLSI circuits. We use signal processing knowledge to make the algorithms suitable for hardware optimizations and try to reduce the critical path of circuits using hardware-specific optimizations. The proposed algorithms ensures a considerable level of security for low-power embedded systems such as portable video players and surveillance cameras. These schemes have zero or little compression losses and preserve the desired properties of compressed bitstream in encrypted bitstream to ensure secure and scalable transmission of videos over heterogeneous networks. They also support indexing, search and retrieval in secure multimedia digital libraries. This property is crucial not only for police and armed forces to retrieve information about a suspect from a large video database of surveillance feeds, but extremely helpful for data centers (such as those used by youtube, aol and metacafe) in reducing the computation cost in search and retrieval of desired videos

Runtime Hardware Reconfiguration in Wireless Sensor Networks for Condition Monitoring

The integration of miniaturized heterogeneous electronic components has enabled the deployment of tiny sensing platforms empowered by wireless connectivity known as wireless sensor networks. Thanks to an optimized duty-cycled activity, the energy consumption of these battery-powered devices can be reduced to a level where several years of operation is possible. However, the processing capability of currently available wireless sensor nodes does not scale well with the observation of phenomena requiring a high sampling resolution. The large amount of data generated by the sensors cannot be handled efficiently by low-power wireless communication protocols without a preliminary filtering of the information relevant for the application. For this purpose, energy-efficient, flexible, fast and accurate processing units are required to extract important features from the sensor data and relieve the operating system from computationally demanding tasks. Reconfigurable hardware is identified as a suitable technology to fulfill these requirements, balancing implementation flexibility with performance and energy-efficiency. While both static and dynamic power consumption of field programmable gate arrays has often been pointed out as prohibitive for very-low-power applications, recent programmable logic chips based on non-volatile memory appear as a potential solution overcoming this constraint. This thesis first verifies this assumption with the help of a modular sensor node built around a field programmable gate array based on Flash technology. Short and autonomous duty-cycled operation combined with hardware acceleration efficiently drop the energy consumption of the device in the considered context. However, Flash-based devices suffer from restrictions such as long configuration times and limited resources, which reduce their suitability for complex processing tasks. A template of a dynamically reconfigurable architecture built around coarse-grained reconfigurable function units is proposed in a second part of this work to overcome these issues. The module is conceived as an overlay of the sensor node FPGA increasing the implementation flexibility and introducing a standardized programming model. Mechanisms for virtual reconfiguration tailored for resource-constrained systems are introduced to minimize the overhead induced by this genericity. The definition of this template architecture leaves room for design space exploration and application- specific customization. Nevertheless, this aspect must be supported by appropriate design tools which facilitate and automate the generation of low-level design files. For this purpose, a software tool is introduced to graphically configure the architecture and operation of the hardware accelerator. A middleware service is further integrated into the wireless sensor network operating system to bridge the gap between the hardware and the design tools, enabling remote reprogramming and scheduling of the hardware functionality at runtime. At last, this hardware and software toolchain is applied to real-world wireless sensor network deployments in the domain of condition monitoring. This category of applications often require the complex analysis of signals in the considered range of sampling frequencies such as vibrations or electrical currents, making the proposed system ideally suited for the implementation. The flexibility of the approach is demonstrated by taking examples with heterogeneous algorithmic specifications. Different data processing tasks executed by the sensor node hardware accelerator are modified at runtime according to application requests

재구성형 연산 구조를 위한 부동소수점 지원

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2014. 2. 최기영.With a huge increase in demand for various kinds of compute-intensive applications in electronic systems, researchers have focused on coarse-grained reconfigurable architectures because of their advantages: high performance and flexibility. Besides, supporting floating-point operations on coarse-grained reconfigurable architecture becomes essential as the increase of demands on various floating-point inclusive applications such as multimedia processing, 3D graphics, augmented reality, or object recognition. This thesis presents FloRA, a coarse-grained reconfigurable architecture with floating-point support. Two-dimensional array of integer processing elements in FloRA is configured at run-time to perform floating-point operations as well as integer operations. More specifically, each floating-point operation is performed by two integer processing elements, one for mantissa and the other for exponent. Fabricated using 130nm process, the total area overhead due to additional hardware for floating-point operations is about 7.4% compared to the previous architecture which does not support floating-point operations. The fabricated chip runs at 125MHz clock frequency and 1.2V power supply. Experiments show 11.6x speedup on average compared to ARM9 with a vector-floating-point unit for integer-only benchmark programs as well as programs containing floating-point operations. Compared with other similar approaches including XPP and Butter, the proposed architecture shows much higher performance for integer applications, while maintaining about half the performance of Butter for floating-point applications. This thesis also proposes novel techniques to enhance utilization of integer units for high-throughput floating-point operations on CGRA. The approach to implementing floating-point operations on CGRA presented in this thesis enables floating-point functionality with less area overhead compared to the traditional approach of employing separate floating-point units (FPUs). However the total latency of a floating-point operation is larger than that of the traditional approach and the data dependency between split integer operations restricts further enhancement in terms of utilization of integer functional units in an operation. In order to overcome such inefficiency, two techniques are proposed in this thesis. One is overlapping two distinct floating-point operations, which increases the efficiency in terms of utilizations of integer functional units in the architecture. Free integer functional units in a floating-point operation can be used for another floating-point operation with this technique. The other is forwarding between two data-dependent floating-point operations, which decreases effective latency of the floating-point operations. The basic idea is to remove unnecessary calculations such as formatting which is normally done in between the two data-dependent floating-point operations. To implement the overlapping or forwarding, FSMs and control paths in each PE are modified and temporal/communication registers are added. Light-weight sub-module such as increment units and registers for intermediate values are added for releasing resource conflict. Experiment is done with several arithmetic functions that are widely used in floating-point applications. The base architecture and the new architecture implementing the proposed technique are compared in terms of throughput and area overhead. The experimental result shows that the proposed technique increases the throughput by 33.9% on average with 20.9% of area overhead.Abstract i Contents v List of Figures ix List of Tables xv Chapter 1 INTRODUCTION 1 Chapter 2 TARGET ARCHITECTURE 7 2.1 Overall Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 Reconfigurable Computing Module . . . . . . . . . . . . . . . . . 8 Chapter 3 DEGISN OF FLOATING-POINT OPERATIONS 15 3.1 Floating-point Numbers . . . . . . . . . . . . . . . . . . . . . . . 15 3.1.1 Representation of floating-point numbers . . . . . . . . . . 15 3.1.2 Floating-point operations . . . . . . . . . . . . . . . . . . . 19 3.2 FPU-PE Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.2.1 Construction of FPU-PE Cluster . . . . . . . . . . . . . . . 20 3.2.2 Construction of Array of FPU-PE Clusters . . . . . . . . . 21 3.2.3 Comparing Different FPU-PE Clusters . . . . . . . . . . . 23 3.3 Implementation of Multi-Cycle Operations . . . . . . . . . . . . 26 3.4 Implementation of Floating-Point Operations . . . . . . . . . . . 30 3.5 Implementation of Floating-Point Operations Using Shared Modules . . . 32 Chapter 4 Chip Implementation 35 4.1 Specification of Chip Implementation . . . . . . . . . . . . . . . . 35 4.2 Experimental Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.3 Experimantal Results . . . . . . . . . . . . . . . . . . . . . . . . . 39 4.3.1 Performance Comparison . . . . . . . . . . . . . . . . . . . 39 4.3.2 Power Consumption Comparison . . . . . . . . . . . . . . 42 Chapter 5 Comparison with Other Architectures 45 5.1 Preparation for the comparison . . . . . . . . . . . . . . . . . . . 45 5.2 Comparison with PACT XPP . . . . . . . . . . . . . . . . . . . . . 47 5.3 Comparison with Butter Architecture . . . . . . . . . . . . . . . . 50 5.4 Implication of the proposed architecture . . . . . . . . . . . . . . 57 Chapter 6 Enhancement Techniques 63 6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 6.2 Conventional Approach . . . . . . . . . . . . . . . . . . . . . . . 64 6.2.1 Base Architecture . . . . . . . . . . . . . . . . . . . . . . . 64 6.2.2 Utilization of Floating-Point Operations . . . . . . . . . . 65 6.3 Proposed Enhancement Techniques . . . . . . . . . . . . . . . . . 66 6.3.1 Overlapping Technique . . . . . . . . . . . . . . . . . . . . 66 6.3.2 Forwarding Technique . . . . . . . . . . . . . . . . . . . . . 71 6.4 Experiments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 6.4.1 Performance Comparison . . . . . . . . . . . . . . . . . . . 76 6.4.2 Hardware Cost of the Proposed Techniques . . . . . . . . . 77 6.4.3 Utilization Enhancement by the Proposed Techniques . . . 80 6.5 Comparison with Other Architecture . . . . . . . . . . . . . . . . 87 Chapter 7 Conclusion 93 Bibliography 95 국문초록 103 감사의 글 105Docto