Raptor Codes for BIAWGN Channel: SNR Mismatch and the Optimality of the Inner and Outer Rates

Fountain codes are a class of rateless codes with two interesting properties, first, they can generate potentially limitless numbers of encoded symbols given a finite set of source symbols, and second, the source symbols can be recovered from any subset of encoded symbols with cardinality greater than the number of source symbols. Raptor codes are the first implementation of fountain codes with linear complexity and vanishing error floors on noisy channels. Raptor codes are designed by the serial concatenation of an inner Luby trans-form (LT) code, the first practical realization of fountain codes, and an outer low-density parity-check (LDPC) code. Raptor codes were designed to operate on the binary erasure channel (BEC), however, since their invention they received considerable attention in or-der to improve their performance on noisy channels, and especially additive white Gaussiannoise (AWGN) channels. This dissertation considers two issues that face Raptor codes on the binary input additive white Gaussian noise (BIAWGN) channel: inaccurate estimation of signal to noise ratio (SNR) and the optimality of inner and outer rates. First, for codes that use a belief propagation algorithm (BPA) in decoding, such as Raptor codes on the BIAWGN channel, accurate estimation of the channel SNR is crucial to achieving optimal performance by the decoder. A difference between the estimated SNR and the actual channel SNR is known as signal to noise ratio mismatch (SNRM). Using asymptomatic analysis and simulation, we show the degrading effects of SNRM on Raptor codes and observe that if the mismatch is large enough, it can cause the decoding to fail. Using the discretized density evolution (DDE) algorithm with the modifications required to simulate the asymptotic performance in the case of SNRM, we determine the decoding threshold of Raptor codes for different values of SNRM ratio. Determining the threshold under SNRM enables us to quantify its effects which in turn can be used to reach important conclusions about the effects of SNRM on Raptor codes. Also, it can be used to compare Raptor codes with different designs in terms of their tolerance to SNRM. Based on the threshold response to SNRM, we observe that SNR underestimation is slightly less detrimental to Raptor codes than SNR overestimation for lower levels of mismatch ratio, however, as the mismatch increases, underestimation becomes more detrimental. Further, it can help estimate the tolerance of a Raptor code, with certain code parameters when transmitted at some SNR value, to SNRM. Or equivalently, help estimate the SNR needed for a given code to achieve a certain level of tolerance to SNRM. Using our observations about the performance of Raptor codes under SNRM, we propose an optimization method to design output degree distributions of the LT part that can be used to construct Raptor codes with more tolerance to high levels of SNRM. Second, we study the effects of choosing different values of inner and outer code rate pairs on the decoding threshold and performance of Raptor codes on the BIAWGN channel. For concatenated codes such as Raptor codes, given any instance of the overall code rate R, different inner (Ri) and outer (Ro) code rate combinations can be used to share the available redundancy as long asR=RiRo. Determining the optimal inner and outer rate pair can improve the threshold and performance of Raptor codes. Using asymptotic analysis, we show the effect of the rate pair choice on the threshold of Raptor codes on the BIAWGN channel and how the optimal rate pair is decided. We also show that Raptor codes with different output degree distributions can have different optimal rate pairs, therefore, by identifying the optimal rate pair we can further improve the performance and avoid suboptimal use of the code. We make the observation that as the outer rate of Raptor codes increases the potential of achieving better threshold increases, and provide the reason why the optimal outer rate of Raptor codes cannot occur at lower values. Finally, we present an optimization method that considers the optimality of the inner and outer rates in designing the output degree distribution of the inner LT part of Raptor codes. The designed distributions show improvement in both the decoding threshold and performance compared to other code designs that do not consider the optimality of the inner and outer rates

Decoding LDPC Codes with Probabilistic Local Maximum Likelihood Bit Flipping

Communication channels are inherently noisy making error correction coding a major topic of research for modern communication systems. Error correction coding is the addition of redundancy to information transmitted over communication channels to enable detection and recovery of erroneous information. Low-density parity-check (LDPC) codes are a class of error correcting codes that have been effective in maintaining reliability of information transmitted over communication channels. Multiple algorithms have been developed to benefit from the LDPC coding scheme to improve recovery of erroneous information. This work develops a matrix construction that stores the information error probability statistics for a communication channel. This combined with the error correcting capability of LDPC codes enabled the development of the Probabilistic Local Maximum Likelihood Bit Flipping (PLMLBF) algorithm, which is the focus of this research work

Area and energy efficient VLSI architectures for low-density parity-check decoders using an on-the-fly computation

The VLSI implementation complexity of a low density parity check (LDPC) decoder is largely influenced by the interconnect and the storage requirements. This dissertation presents the decoder architectures for regular and irregular LDPC codes that provide substantial gains over existing academic and commercial implementations. Several structured properties of LDPC codes and decoding algorithms are observed and are used to construct hardware implementation with reduced processing complexity. The proposed architectures utilize an on-the-fly computation paradigm which permits scheduling of the computations in a way that the memory requirements and re-computations are reduced. Using this paradigm, the run-time configurable and multi-rate VLSI architectures for the rate compatible array LDPC codes and irregular block LDPC codes are designed. Rate compatible array codes are considered for DSL applications. Irregular block LDPC codes are proposed for IEEE 802.16e, IEEE 802.11n, and IEEE 802.20. When compared with a recent implementation of an 802.11n LDPC decoder, the proposed decoder reduces the logic complexity by 6.45x and memory complexity by 2x for a given data throughput. When compared to the latest reported multi-rate decoders, this decoder design has an area efficiency of around 5.5x and energy efficiency of 2.6x for a given data throughput. The numbers are normalized for a 180nm CMOS process. Properly designed array codes have low error floors and meet the requirements of magnetic channel and other applications which need several Gbps of data throughput. A high throughput and fixed code architecture for array LDPC codes has been designed. No modification to the code is performed as this can result in high error floors. This parallel decoder architecture has no routing congestion and is scalable for longer block lengths. When compared to the latest fixed code parallel decoders in the literature, this design has an area efficiency of around 36x and an energy efficiency of 3x for a given data throughput. Again, the numbers are normalized for a 180nm CMOS process. In summary, the design and analysis details of the proposed architectures are described in this dissertation. The results from the extensive simulation and VHDL verification on FPGA and ASIC design platforms are also presented

A Hardware Implementation of a Coherent SOQPSK-TG Demodulator for FEC Applications

This thesis presents a hardware design of a coherent demodulator for shaped offset quadrature phase shift keying, telemetry group version (SOQPSK-TG) for use in forward error correction (FEC) applications. Implementation details for data sequence detection, symbol timing synchronization, carrier phase synchronization, and block recovery are described. This decision-directed demodulator is based on maximum likelihood principles, and is efficiently implemented by the soft output Viterbi algorithm (SOVA). The design is intended for use in a field-programmable gate array (FPGA). Simulation results of the demodulator's performance in the additive white Gaussian noise channel are compared with a Matlab reference model that is known to be correct. In addition, hardware-specific parameters are presented. Finally, suggestions for future work and improvements are discussed

Sequence codes

Véase documento adjunt

Hardware-Conscious Wireless Communication System Design

The work at hand is a selection of topics in efficient wireless communication system design, with topics logically divided into two groups.One group can be described as hardware designs conscious of their possibilities and limitations. In other words, it is about hardware that chooses its configuration and properties depending on the performance that needs to be delivered and the influence of external factors, with the goal of keeping the energy consumption as low as possible. Design parameters that trade off power with complexity are identified for analog, mixed signal and digital circuits, and implications of these tradeoffs are analyzed in detail. An analog front end and an LDPC channel decoder that adapt their parameters to the environment (e.g. fluctuating power level due to fading) are proposed, and it is analyzed how much power/energy these environment-adaptive structures save compared to non-adaptive designs made for the worst-case scenario. Additionally, the impact of ADC bit resolution on the energy efficiency of a massive MIMO system is examined in detail, with the goal of finding bit resolutions that maximize the energy efficiency under various system setups.In another group of themes, one can recognize systems where the system architect was conscious of fundamental limitations stemming from hardware.Put in another way, in these designs there is no attempt of tweaking or tuning the hardware. On the contrary, system design is performed so as to work around an existing and unchangeable hardware limitation. As a workaround for the problematic centralized topology, a massive MIMO base station based on the daisy chain topology is proposed and a method for signal processing tailored to the daisy chain setup is designed. In another example, a large group of cooperating relays is split into several smaller groups, each cooperatively performing relaying independently of the others. As cooperation consumes resources (such as bandwidth), splitting the system into smaller, independent cooperative parts helps save resources and is again an example of a workaround for an inherent limitation.From the analyses performed in this thesis, promising observations about hardware consciousness can be made. Adapting the structure of a hardware block to the environment can bring massive savings in energy, and simple workarounds prove to perform almost as good as the inherently limited designs, but with the limitation being successfully bypassed. As a general observation, it can be concluded that hardware consciousness pays off

Physical-Layer Cooperation in Coded OFDM Relaying Systems

Mobile communication systems nowadays require ever-increasing data rate and coverage of wide areas. One promising approach to achieve this goal is the application of cooperative communications enabled by introducing intermediate nodes known as relays to support the transmission between terminals. By processing and forwarding the receive message at the relays, the path-loss effect between the source and the destination is mitigated. One major limit factor for relay assisted communications is that a relay cannot transmit and receive using the same physical resources. Therefore, a half-duplex constraint is commonly assumed resulting in halved spectral efficiency. To combat this drawback, two-way relaying is introduced, where two sources exchange information with each. On the other hand, due to the physical limitation of the relays, e.g., wireless sensor nodes, it's not possible to implement multiple antennas at one relay, which prohibits the application of multiple-input multiple-output (MIMO) techniques. However, when treating multiple relays as a cluster, a virtual antenna array is formed to perform MIMO techniques in a distributed manner. %This thesis aims at designing efficient one-way and two-way relaying schemes. Specifically, existing schemes from the literature are improved and new schemes are developed with the emphasis on coded orthogonal frequency division multiplexing (OFDM) transmissions. Of special interest is the application of physical-layer network coding (PLNC) for two-phase two-way relaying. In this case, a network coded message is estimated from the superimposed receive signal at the relay using PLNC schemes. The schemes are investigated based on a mutual information analysis and their performance are improved by a newly proposed phase control strategy. Furthermore, performance degradation due to system asynchrony is mitigated depending on different PLNC schemes. When multiple relays are available, novel cooperation schemes allowing information exchange within the relay cluster are proposed that facilitate distributed MIMO reception and transmission. Additionally, smart signaling approaches are presented to enable the cooperation at different levels with the cooperation overhead taken into account adequately in system performance evaluation

On generalized LDPC codes for ultra reliable communication

Ultra reliable low latency communication (URLLC) is an important feature in future mobile communication systems, as they will require high data rates, large system capacity and massive device connectivity [11]. To meet such stringent requirements, many error-correction codes (ECC)s are being investigated; turbo codes, low density parity check (LDPC) codes, polar codes and convolutional codes [70, 92, 38], among many others. In this work, we present generalized low density parity check (GLDPC) codes as a promising candidate for URLLC. Our proposal is based on a novel class of GLDPC code ensembles, for which new analysis tools are proposed. We analyze the trade-o_ between coding rate and asymptotic performance of a class of GLDPC codes constructed by including a certain fraction of generalized constraint (GC) nodes in the graph. To incorporate both bounded distance (BD) and maximum likelihood (ML) decoding at GC nodes into our analysis without resorting to multi-edge type of degree distribution (DD)s, we propose the probabilistic peeling decoding (P-PD) algorithm, which models the decoding step at every GC node as an instance of a Bernoulli random variable with a successful decoding probability that depends on both the GC block code as well as its decoding algorithm. The P-PD asymptotic performance over the BEC can be efficiently predicted using standard techniques for LDPC codes such as Density evolution (DE) or the differential equation method. We demonstrate that the simulated P-PD performance accurately predicts the actual performance of the GLPDC code under ML decoding at GC nodes. We illustrate our analysis for GLDPC code ensembles with regular and irregular DDs. This design methodology is applied to construct practical codes for URLLC. To this end, we incorporate to our analysis the use of quasi-cyclic (QC) structures, to mitigate the code error floor and facilitate the code very large scale integration (VLSI) implementation. Furthermore, for the additive white Gaussian noise (AWGN) channel, we analyze the complexity and performance of the message passing decoder with various update rules (including standard full-precision sum product and min-sum algorithms) and quantization schemes. The block error rate (BLER) performance of the proposed GLDPC codes, combined with a complementary outer code, is shown to outperform a variety of state-of-the-art codes, for URLLC, including LDPC codes, polar codes, turbo codes and convolutional codes, at similar complexity rates.Programa Oficial de Doctorado en Multimedia y ComunicacionesPresidente: Juan José Murillo Fuentes.- Secretario: Matilde Pilar Sánchez Fernández.- Vocal: Javier Valls Coquilla

Digital Communication System with Multi-carrier Modulation (OFDM) for Power Lin

Projecte realitzat en col.laboració amb el centre Instituto Superior Técnico (UTL)Se propone el un diseño para un receptor OFDM. El esquema de sincronismo esta dividido en cuatro partes para estimar el sincronismo de los simboles, el offset frecuencial y el canal de transmision. Se implementa un esquema conjunto de ecualizacion y decodificacion basados en un algoritmo MMSE con informacion a priori y codigos LDPC, respectivamente. La asignacion de la carga de los subcanales sigue el criterio Water-filling

Multiple-Input Multiple-Output Detection Algorithms for Generalized Frequency Division Multiplexing

Since its invention, cellular communication has dramatically transformed personal lifes and the evolution of mobile networks is still ongoing. Evergrowing demand for higher data rates has driven development of 3G and 4G systems, but foreseen 5G requirements also address diverse characteristics such as low latency or massive connectivity. It is speculated that the 4G plain cyclic prefix (CP)-orthogonal frequency division multiplexing (OFDM) cannot sufficiently fulfill all requirements and hence alternative waveforms have been in-vestigated, where generalized frequency division multiplexing (GFDM) is one popular option. An important aspect for any modern wireless communication system is the application of multi-antenna, i.e. MIMO techiques, as MIMO can deliver gains in terms of capacity, reliability and connectivity. Due to its channel-independent orthogonality, CP-OFDM straightforwardly supports broadband MIMO techniques, as the resulting inter-antenna interference (IAI) can readily be resolved. In this regard, CP-OFDM is unique among multicarrier waveforms. Other waveforms suffer from additional inter-carrier interference (ICI), inter-symbol interference (ISI) or both. This possibly 3-dimensional interference renders an optimal MIMO detection much more complex. In this thesis, weinvestigate how GFDM can support an efficient multiple-input multiple-output (MIMO) operation given its 3-dimensional interference structure. To this end, we first connect the mathematical theory of time-frequency analysis (TFA) with multicarrier waveforms in general, leading to theoretical insights into GFDM. Second, we show that the detection problem can be seen as a detection problem on a large, banded linear model under Gaussian noise. Basing on this observation, we propose methods for applying both space-time code (STC) and spatial multiplexing techniques to GFDM. Subsequently, we propose methods to decode the transmitted signals and numerically and theoretically analyze their performance in terms of complexiy and achieved frame error rate (FER). After showing that GFDM modulation and linear demodulation is a direct application of Gabor expansion and transform, we apply results from TFA to explain singularities of the modulation matrix and derive low-complexity expressions for receiver filters. We derive two linear detection algorithms for STC encoded GFDM signals and we show that their performance is equal to OFDM. In the case of spatial multiplexing, we derive both non-iterative and iterative detection algorithms which base on successive interference cancellation (SIC) and minimum mean squared error (MMSE)-parallel interference cancellation (PIC) detection, respectively. By analyzing the error propagation of the SIC algorithm, we explain its significantly inferior performance compared to OFDM. Using feedback information from the channel decoder, we can eventually show that near-optimal GFDM detection can outperform an optimal OFDM detector by up to 3dB for high SNR regions. We conclude that GFDM, given the obtained results, is not a general-purpose replacement for CP-OFDM, due to higher complexity and varying performance. Instead, we can propose GFDM for scenarios with strong frequency-selectivity and stringent spectral and FER requirements